Metra '07-08 Honda Fit Radio Install Kit

Truly made to fit the Fit. While there was a lot of discovery involved in this process, the kit worked perfectly. Keep in mind you have to transfer several comply from the original dash, such as mounting clips, and AC/heat controls. Also, it seems they fixed the issues with the AC control stops being molder backwards. My kit’s stops were correctly oriented. Make sure you use the plates that clip on and screw your new stereo into that and you’ll be fine. Watch some YouTube videos for removal tips. But your radio will have some differences.

Excellent quality. All you need for perfect fit.

Fit well enough that most people wouldn't know it wasn't factory, except the little bezel that goes the inside edge of the stereo. It wasalittle cheap feeling and delicate. No issues reusing old knobs. Any problems with the position of the knob stops being upside down have been fixed.

The 07 honda fit radio install kit left a little to be desired. For one, the temperature gage sticker had an extra white flakiness to it. I used my fingernail to get it off mostly but the area doesn't have the true color. That, however, is nothing compared to how it doesn't sit nice and tight against the rest of the dash once installed. there is a clear space between the rest of the dash and the install kit that leaves the setup looking shabby. I can literally push on the dash kit and it butts against the rest of the dash nicely, but once pressure is taken off it goes right back to leaving a space. It's not horrible, I mean there aren't many kits out their for the Fit but i wish it was a little tighter. Also the single din plastic frame is very flimsy in the middle. I installed a kenwood and the bottom of the frame bows upward a small bit like a rainbow. Its bearable, but again, it isn't tight. If you are very particular about tightness and a clean install I would suggest trying a different brand. It does the job 85% effectively, just not as aesthetically pleasing as I had hoped for.

Everything was as advertised, everything worked as expected. There is a small fitmit issue, as the dash kit doesn't sit flush with the dash entirely on the driver's side. Every clip is installed as it should be and I believe it to be an issue with the stock radio being bolted in with two 8mm bolts, and this kit omits those entirely. Won't blame the seller or the manufacturer too much, as this is a minor issue that I can deal with. Just be aware if you are going to care about it sitting absolutely flush. Very easy to install, once you know your way around the fit. The color is spot on and matched the dash perfectly. Would buy again.

Queda Exelente en honda fit 2007 y anterior mente tuve problemas con otra que ordené. Y no quedó pero está si

Good fit for a ‘08 Honda Fit. I utilized both the Metra and original metal bracket for the install. Didn’t experience sagging or issues with knob limiter like other users.

This is the ONLY adapter that will work for a first gen (2007) Honda Fit. Nobody else makes one. That's why they charge what they do, instead of the $14 kits for practically any other car. That being said, it worked well and I was able to install the radio with no issues on the adapter side. (It was my first time installing a car radio, so it took me about 8 hours to get it completely done between the googling and the running out for additional parts like bolts and cable adapters.) The color of the plastic isn't an exact match to the dash, but it's close enough that you really don't notice a difference.Important: THIS DOES NOT COME WITH THE CLIPS YOU NEED TO FIT IT BACK INTO THE DASH. You'll need to take the metal clips off the original radio frame and put them onto this new one. You won't need to worry about that one different flat clip on the lower right side, as the new frame doesn't have a place for it. But this adapter kit will not stay in place if you do not have the metal clips.