Blue Sea Systems2301 150 Amp Common BusBar with 10 screws

Very high quality, perfect stud size and looks great! Has stood up over years of being in a salt water boat! Highly recommend !

Built heavy.

Excellent product. Perfect for my application in adding a neutral bus in my camper trailer.

this sucker cost a bit of money, however, worth every penny i paid.i am building a high end car and am tired of paying good money for cheap chinese crap being passed off as quality parts and sellers charging for a quality part, that turns out to be junk that i end up tossing in the trash. i have to tell you, this bus bar is HIGH quality. if you are looking for a bus bar and want something that is going to last and compliment all the hard work you have put in on your project, this is the one for you. spend the extra 10 bucks, you will not be sorry.i am considering buying another for a car i finished 5 years ago and replacing the bus bar i have in it.BLUE SEA 2105 MAXIBUS 250 AMP COMMON BUSBAR TWELVE # 10 TERMINAL SCREW LUGS.i have purchased 3 other BLUE SEA products. All four BLUE SEA products are of the highest quality and do what they are intended to do. no having to redesign the wheel to make em work. nothing strips or falls off. they mount as they should. designs are clean. they add to the high quality of any project.i am in no way related to, nor do i sell BLUE SEA products. i am, however, a very happy BLUE SEA customer.if you are tired of wasting money on crap, drop the few extra bucks on these products. in the long run, you will save lots of time and money on the front end as well as on the back end.

It’s hard to find nowadays but all the “blue sea” items so far have been good quality materials and construction for the money and they should hold up well for marine environment-I will definitely be replacing some Chinese junk with these soon!

I bought this case when I bought the Blue Sea Sytem's 6 terminal post Busbar. And this is really a great product. I am very happy with it. First the 6 post busbar easily snaps downward into the sturdy bottom of this casing. The top of the housing is firmly held in place with 4 very strong and very accurate yellow heavy duty clamps that simply snap into place once your place the top housing over the bottom one..It holds the busbar very firmly.. And protects the busbar completely from any contact with any other opposite charged cables. I use one of these for all of my power/ positive connections and another of the same where I connected all of my negative cables. They are very roomy, so this makes it very easy to use since I have large hands.I cannot recommend this cover and casing highly enough! It is so sturdy. Reminds me of the quality we all "used" to get way back before "outsourcing" began. That's how well built this is.. And whenever I need to change a connection, it is extremely quick and simple to unsnap the top part, do my changes, and then reconnect the top. Takes two minutes.Also there are plastic panels that are easily removed located all along on the top piece, exactly where your wires need to go. I just pry them off with a plier as I need to.. Perfect!

I mounted this in the engine bay of a my truck so I could ground accessories away from original factory ground wires. It's just a metal bar with screws in it. Pretty simple. Seems to be good quality material. I tightened the screws down and didn't strip any so that's good. To mount it, I bent open a short piece of aluminum angle so it was more like 135 instead of 90 degree and used that to mount this grounding bar to side of engine bay on an existing threaded hole. Mounting the bus bar at an angle lets wires droop down without much strain but it's still easy to access with a screwdriver from above to connect wires.

I recently used 2 of these as I worked on installing a custom stereo system in my pontoon boat. The whole system has been designed to run off one dedicated deep cycle battery.One bar was used for as a 12V source, and the other as ground. I used Anchor brand 8 gauge wire to hook from each of these direct to the battery, and used a variety of wire sizes (10 AWG, 12 AWG, and 16 AWG) to supply power to a Kenwood marine head unit, JBL 4 channel marine amp, and JBL 200W 10" sub. It was easy to keep all the wiring neat and tidy (I'm a perfectionist), so I was happy about that.after I assembled everything, with marine grade wire, crimp on connectors, and solder all around, the resistance measured through 9 feet of 8 AWG wire, the bus bar, and the longest piece of wire I had connected to the bar was 0.1 Ohms or less.Construction seems very sturdyThe covers are a nice touch, although there aren't too much more than a deterrent for rouge wires to accidentally touch the wrong bus bar - I had no clearance issues with 8 AWG wire (using ring terminals)I will post a picture of my configuration shortly.Buy with confidence!I will follow up at some point to comment on how well this product stands up to extended exposure to a salt water environment.

:)

Used this to isolate connections from my motorcycle battery posts.

Great quality, use in dual battery setup for truck. Works awesome.

good item

great item and service