Superbat UHF Male PL-259 to UHF Male PL-259 Low Loss Digital Coax UHF Jumper Cable (2ft RG58) for HAM & CB Radio,Antenna Analyzer,Dummy Load,SWR Meter

I bought this to replace an older, slightly longer, coax jumper between my HF transceiver and antenna tuner.Immediately used it on HF bands using 80w-100w. The cable leaked so much RF it caused local devices (computers, etc) to behave erratically or simply shut down.Re-installed the original coax jumper and everything worked normal.My recommendation: do not use/buy these to connect HF RF equipment. They might work fine for low power devices (under 5w), but 50+ watts there is significant leakage.

I purchased this jumper cable specifically to use when testing SWR on a ham radio install. It appears to be of great quality and works well for my needs.***********************************************************************************************************************************************I rely on reviews when I make purchases so I put a lot of time into reviewing everything I buy on Amazon for personal and my business. Please show your appreciation by clicking the "helpful" below when it asks if the review is helpful!!!

This product is 100% defective with a shorted center pin to shield. Luckily my HF radio has a basic swr meter or I would have destroyed it. I double checked with the continuity setting of two multimeters and confirmed it’s bunk.Avoid at all costs.

Worked well. Looks! feels like good quality compared to another cable I purchased, which was at similar price and functionality. Cable length I had was enough to connect analyzer to radio. Screws on easily and snug. I don't know the product longevity though.

Nothing to dislike here it’s a simple dual male connector. Used it to connect the SWR meter to my CB and worked perfectly. It’s made solidly and looks clean

It will be functional but I would have preferred better quality pl-259 fittings. I bought it to go with my Bird wattmeter to patch into the feed line of my rigs.

These are ok for the price. I should've spent more.

Perfect size cable for SWR antenna testing. Seems to have worked just fine.

The patch cord allowed me to reposition my UHF/VHF Antenna on the mast easily. In cold Canadian winter and without major surges in the cold elements of winter the patch worked well.

RG58 A/U cable with is 50 ohm and relatively low loss at HF and VHF. The PL259 connectors are well machined. This cable has a 1400 volt rating, or suitable for up to about 70 watts.

I was using it on a mobile setup, and it could not withstand this type of use for very long. It is thin and unobtrusive, and worked well until it broke, so I'd say it's a use-case decision to be made on projected use.

Both the cable and plugs seems to be well made and of good quality. The 12" coax patch cord is handy for SWR meters, tuners, etc. I ordered two more I was so pleased.

Not bad for a cheaper than good quality cables. Does add q bit of noise, but overall - okay. Main pro is speed of delivery and assembly quality - fast and good.