Granite, Marble, Quartz & Acrylic Repair Kit (Clear/Transparent) - Suitable for Most Repairs I Also for Tile, Countertop, Fiberglass & Ceramic Surfaces I Fix Broken Chips & Cracks in Minutes

Absolutely fantastic, can’t even notice it. I did need a better uv light and left it there a few house but I am well impressed and would highly recommend this product. If I can do it anyone can. It’s saved my granite worktop.

Easy to apply on a chipped cooker hob. I added ceramic paint after the repair to make it blend in.

Works well and easy to use The only thing to be aware of it takes longer to cure that the instructions say

Had a small chip on the corner, followed instructions and was still sticky after 6 mins. Left the light shining on chip for over an hour and was still sticky, ended up having to try remove the sticky mess.

This is relatively easy to use if you use a proper UV light (I bought one for this repair), but it does not repair glass worktops. I tried to repair a glass top, which has a chip in the edge. It all went well until I tried to finish it with the abrasive paper and polish. Each time the hardened epoxy broke away from the glass. I tried this 6 times, including filling and hardening it (UV) in stages each time. The chip was about 3mm deep at the edge x 8mm wide. I have had to give up and will have to get a new worktop eventually as the chip is very obvious. This epoxy simply doesn't bond well to glass - disappointing (and a waste of 3 hours effort).

I followed the advice of a previous reviewer and used sellotape and injected the material in before following the instructions with the uv light and polishing. I had a quote for 180 to fix and came with no guarantee that I would be satisfied with the result. This not perfect but you would only notice if you were looking for it and it doesn’t catch the eye like before anymore. I think this stuff is amazing! Thanks

This is a great idea but let down by shocking execution. A blue LED is not a UV light. Curing took close to 10 hours. Thankfully a bulldog clip meant I didn't have to lie on the bathroom floor all of that time. Rather than buy this product, you can buy 100g of UV cure resin and a real UV light for the same price and do a proper job.

Did a great job on a number of nicks and chips in my quartz worktop (brownish red colour), however this was because I have a separate battery powered UV light that actually cured the liquid to solid. The provided battery powered, 'blue LED' keyring light is practically useless for this purpose. TLDR; if you have a UV light, this kit is superb and has everything you need for pro results. If you don't have a UV light, you'll need to buy one for this to be useful.