1.3 L Clear Wood Stain Oil, 2 Component, Easy to Apply, Very Low Odor, Dries Fast, VOC/Solvent Free, Durable Hardwax Oil for Interior Furniture & Flooring

Now my go to monocoat for my woodwork items as slightly cheaper than Rubio. It’s a two part which helps it to cure pretty quickly, has good coverage, and a fantastic finish on different wood types

Excellent product easy to use and lovely finish

I’ve been using 1 part hard wax oils (eg Osmo) for years. The real problem is the time that they take to cure and that you have to apply several coats. A 2 pack hard wax oil like Natura Onecoat comes with hardener which accelerates the cure. In my shop, it is touch dry in 30 or 40 minutes - meaning that I can move it off my bench and have no fear about dust spoiling the finish. Plus one coat. You can apply 2 coats but really you are just adding more wax as the oil in the first coat has sealed the wood. A little goes a long, long way. The only thing that matters to me on cost is not the cost per can but the cost per square metre- and Natura is by far the best. Cheaper than Rubio and goes further than Rubio. My one negative is still the cans - both now have spouts on to eliminate spills - which end up meaning you don’t get a seal on the can and the stuff goes off. I think plastic bottles are the way forward but what do I know about production and the problems of product in small bottles being damaged in transit - my deliveries often get lobbed over the gates!

Great for small areas but having just done a 220 ft² floor I have regrets. The fumes 7 days on are terrible and the finish is VERY matt. I preferred Liberon Hard Wax Oil by a mile. Wouldn't hesitate to use this on furniture as an alternative to Rubio Monocoat though Edit. The makers contacted me concerned about my comments. I supplied all the info, answered all the questions and even supplied images. Their conclusion was that it was poor application (!) or a fake product. Appalling attitude from them. Very disappointed.

Muy buen producto. Antes de comprarlo busqué muchos videos en inglés pues quería compararlo con la competencia. No quería comprar un producto malo por ahorrarme 200 pesitos. En los videos sale gente comparándolo con otros productos similares. Los exponen a las mismas condiciones y al final los comparan tomando en cuenta rendimiento y la manera como reflejan la luz. Este fue de los más equilibrados. Buen precio y resultados como si fuera de los más caros. Es facilísimo de aplicar y rinde mucho. Hice una zapatera de 1.90 de alto por 90 de ancho con 10 estantes. Solo me gasté medio botecito de 360 mm. Claro la tapa de atrás de triplay a esa le puse nitrocelulosa. Quedó bien. Se endurece bien y se ve mucho más fino el trabajo. En este caso te ahorras sellador y uso de compresor. Y es mucho más rápido y con menos pestilencia. Aunque si hay que usar mascarilla por más que digan que no.

I decided to give this a try as I thought Rubio's oil was a bit too expensive for what I was doing. When I applied the oil, the charcuterie boards really popped, both the black walnut and epoxy. Easy to apply and wipe off, leaving a nice matte finished. I applied a second coat but not sure if it improved the sheen. The only thing, make sure you clean both lids after use has they are hard to get off once dried.

First of all, let me state I’m relatively new at woodworking and finding a coating system like this has been a game changer. I had scheduled in a last-minute craft show for my products and had less than a week to produce enough products to set up my booth. After a few months of researching Natura Onecoat and a few of its competitors I was finally put in the position where I needed to finish multiple pieces in the matter of hours versus days. The results were absolutely amazing. After the first day of the show, I had sold quite a few pieces and needed to produce more that night in order to rebuild my stock. I was able to machine sand and finish over a dozen charcuterie boards, and other items all in one evening. Per their instructions I only sanded everything to 120 (well 150 because I ran out of 120) which only took a few minutes after my products came out of the drum sander. I was very nervous because I couldn’t wrap my head around how it was going to be a smooth finish once I applied their product. As promised after going through the proper steps of application, I buffed my pieces dry and the results were shocking. I was left with a beautiful satin finish that made the grain and color of the wood pop like I’ve never seen before. The compression curl in one of my boards had a 3-D effect And only took 15 minutes to do. This allows me to bring over $1000 more dollars in products between day, one and day two of the show. My customers were amazed of the quality of finish for the items that they end up purchasing. In all I was able to finish over $2000 worth of wood products and used just under a half of a can to do so. I would have spent dozens of hours over the course a few days to finish these products with industry standard finishes, such as poly. Instead, I was able to produce more products which is incredibly valuable to a small business. Secondly the customer Service of this company is absolutely amazing. I posted a question on their website about a specific use of their product that it wasn’t necessarily intended for. I didn’t just receive a email reply I actually received a call around 6pm from Turkey (3am there) from one of the creators and executives are the company. He was able to answer all of my questions and we had a great conversation about his product. Informed me there are some great things to be released that is going to be a game changer to woodworking, for that I’m really excited. So here’s my recommendation, pull the trigger guys and gals. Give this product a shot!! Not only is it extremely inexpensive for the amount of wood it covers, you will also be able to spend more time producing because you’ll have a fraction of the time spent finishing……. Time is absolutely money. And if you’re up in the air between these guys and the competitors that we all known the names of. Watch the video from the wood whisperer on his blind stress test of similar products. These guys win, hands-down, and still are a third of the cost.

Almost foolproof to use and has a fantastic finish. One coat and done. This is now my go-to finish on furniture. I hope it's durable, but the review videos make it look good for anything other than maybe a kitchen table. It took about 7 ounces to do this credenza, which is truly amazing. A little goes a long way. 10/10. Highly recommended.

Excellent produit, on avait essayé d’autre marque. Il fait un aussi bon résultat et coûte beaucoup moins.