87mm T129215SU PLA09215S12H 12V 0.55A 4Pin Graphics Card Fan for EVGA RTX 3070 3080 3090 XC3 Black Gaming Graphics Card Fan, BR002

Hard to find direct replacements, much less that look like OEM ones. They feel a bit "generic" but for the most part they look about the same. Like a knock-off maybe? Which doesn't bother me, I just wanted them to work. They are surpringly quieter than the original fans, like much quieter. But that's probably because they don't spin as fast. At least according to hwiNFO, they would not go above 2000rpms, so my overall temps increased by 3-5 degrees. Core temps stayed within 82 degrees and hotspot hit 89 degrees. However, I'm actually happy with them. A few degrees higher but even at full speed they are noticably quiet. I installed them on a EVGA RTX 3080 XC3. Fit perfectly and had 0 issues with the cable length. Oh, but like others have experience, I had to remove the original "E" decals off the original fans and stick them on the new ones, but otherwise great replacements.

Received the full set of three fans to fit the xc3 series of cards. By all appearances these are equivalent to oem fans and fit perfectly. Good way to breathe new life into a card that is still very close in performance to the 50-series!

Selling the pla 0922 fans advertised as pla0921 fans. Will not fit your xc3 video cards. Will fit ftw3 models

This product saved my RTX 3080 Ti. I purchased this fan pack to replace one of my broken fans, and now my temps are solid again. They look exactly like EVGA fans too.

They are little longer for the other model but you can still get them to work for the xc3 card perfectly fine no issue and if you know what your doing and your experiencing noise or thermal throttle lag these fans may fix the issue they also are exact evga fans so there is no difference from the previous once.

Original part but not the sticker. Easy fix remove original logo from broken fan carefully and place it onto the new fan. Problem solved.

I have a 3070ti xc3 although it is true that they work, the cable of the fans is a little longer than that of the originals, so it is a little difficult for me to assemble it. Another thing would also be the finish, since in the central part they only have a sticker, while the originals have plastic E you can feel. And finally the fans are a little higher so they protrude a little

As Described

Got this to replace a broken fan on my EVGA RTX 3080ti. Easy to fit. The whole process from removeing GPU from PC to boot up took about 30 mins. It's working well - Temps back to where they should be.

Fits perfectly

Works with 3080 ti.

Though the serial numbers are slightly different, these appear to be otherwise identical to the fans on my EVGA 3080 Ti XC3. At first I thought they were too big, but you need to line up the holes for the screws absolutely perfectly, and it fits with barely a millimeter to spare. One thing to note is that the cables are very slightly longer than the ones I was replacing, maybe by 1cm or less. You will have to make sure you don't allow the excess to get in the way of any of the fans, especially the fan farthest from the ports.