KUIPERAUTO Running Boards Side Steps Compatible with 2018-2024 Jeep Wrangler JL 4-Door Unlimited Sports Sahara Rubicon Round Drop (3 inches)

Love them. Very last bolt stripped out when installing, but they look great easy to install and for the price very happy.

Does not exactly fit 2012 jeep rubicon. Couldn't use the outside 4 bolts on the end brackets only 2. Bolts the attached brackets underneath were wrong threads. I made it work I like the rails.

As usual, the instructions are pretty bad. Here's what you need to know: Installation can be accomplished entirely by yourself with three tools: 12mm, 13mm, and 14mm wrenches. I also used a 12mm and 13mm socket with an extension, but it's not necessary. Part A is a 13mm hex screw. Part B is a 12mm flange bolt. Part C is a 14mm hex nut and threads onto Part B. Tips: 1.) Mount the brackets onto the sides of the vehicle and thread everything LOOSELY at first. I mean really loose--like 3-4 finger turns. Just enough to keep it from falling out. You'll need some wiggle room to get things aligned and you do NOT want to cross-thread anything. Once everything is threaded nicely, go back and hand-tighten everything. The instructions are unclear here. The flange screw (Part B) goes through the bracket, through the vehicle, then a fender washer, then a locking washer, then the nut. 2.) When installing the hex screws to the undercarriage, anti-seize lubricant is wise, especially if your vehicle is older, rusty, or you'd like to remove these bars easily at some point. 3.) When attaching the bars to the brackets, the long part of the bar goes to the front. Start in the middle, hold it in place with one hand and LOOSELY thread a screw through the bracket and into the bar just enough so it doesn't fall out. You need lots of wiggle room in order to thread the other 11 hex screws. The instructions are also unclear here. The hex screw gets a locking washer, then a fender washer, then goes through the mounting bracket, and then into the bar. 4.) Once all the hex screws are threaded, go back and tighten them up. For a sleeker, more subtle look, add a dab of black paint to the heads of the flange bolts so they don't stand out as much. Not including back-and-forth to the toolbox, making notes, and taking pictures for this review, installation took around 60 minutes.

Works great. Looks good. Don't get if you rock crawl, to to reduced clearance. They are awesome if you have small kids and or bad knees.