Creality Official Carbon Fibre Hyper PLA Filament, 3D Printer Filament for High Speed Printing, Smooth, Dimensional Accuracy +/-0.03mm, 2.2lbs/Spool

I ordered this filament dryer as my first ever non-homemade dryer. I wish I had saved myself the hassle of making home made dryers. The Creality Space PI Filament Dryer is the ideal companion for any printer. The setup is as simple as plug in and away you go. The screen on the front gives you a very nice high quality feel and the navigation is very intuitive. I have seen some reviews complaining about the “power on”button not responding properly, I have not had this issue at all. The dryer is not particularly loud either, when turning on and beginning the heating up cycle the fans will blow but this eventually dies down to almost silence. Any printer near by will drown out the noise of the dryer. The dryer comes with a tube that comes out of the top to allow use of the dryer while printing. My only complaint is that when setup with my Creality Ender 3 V3 SE this tube kept slipping down into the dryer itself making the tube pull tight when the printer was at its furthest away point. I solved this by putting a cable tie around the tube to stop it from slipping into the dryer. This however does not impact my opinion on the machine. The dryer is adjustable and can heat up to anywhere between 45-70 degrees C and has realtime humidity and temperature monitoring which is a huge plus. I very much enjoy the humidity monitoring so you can actively see it working. The dryer will only fit the standard 1kg spools and below, no 5kg big spools and I’m sure with an adapter you may be able to print with smaller spools. Overall I think this is a fantastic filament dryer for both beginners and advanced makers. Your prints and printer will benefit immensely from having this dryer, my overall quality has improved simply by keeping my filaments dry. I’m glad to say it was money well spent and if Creality ever decide to make a 3 or even 4 roll dryer I think that would be perfect for those more advanced makers.

This filament is fantastic. The carbon fiber infusion creates parts that are incredibly stiff and strong, with almost no flex. It prints almost as easily as regular PLA but delivers a much more professional and durable result. The finish is beautiful and hides layer lines well. Just remember to use a hardened steel nozzle! For functional projects, this is now my go-to material. Highly recommended!

Dropped a point because I cant adjust the temperature to lower than 45 degrees or set a on off time schedule!

I was having some problems with the print that looked like it might be due to the material getting too wet. My room is quite humid as it is. Recommendations were to get a drier and this brand is highly regarded so I picked it up. It works really well, dries the filament to a very good amount and the resulting prints are much better as a result. Works quite quickly too, but I tell it to keep drying for the duration of the print just to ensure quality. I have had a few problems with the feed from the box to the printer but by repositioning it I cured those and the last few prints were perfect. The controls on the front are resistive input from what I can tell so they need a little more of a forceful touch than the super gentle touch I'm used to on touch screens but once you get used to it, it's efficient to use the controls and get the result you want. I only use it for PLA+ but it seems to have all the settings needed for other materials from what I can tell. Definitely recommend this as a drier for single filament reels. If I ever need multiple, I'll certainly be looking to this brand.

This is such nice filament, the finish it gives hides the layer lines and it pairs so well with the K1C printer, printing at great speeds. Only down side is the price but if its something that needs to be strong and look nice this is what you want! The prints are nice, durable and have excellent bed adhesion. Quality stuff.

Does everything I need. The screen isn’t the best, but doesn’t effect the dryer. Could do with being able to open the door a little to let the moister out, but you can easily 3D print something for that. All round happy. - Little side not, these should be a lot cheaper in general.

Creality was always 1st to, but since the last order I will not touch the white Hyper PLA with 2m pole. Absolute horror to print anything with it. I wasted half of the spool and hours to try to calibrate flow but without any luck. It run like water even on 190C. At the end even the nozzle give up. Only good come from this is I find out that the hot end coil was loose I can only guess it happened due countless nozzles cleaning during hours calibration so end up buying upgraded k1c hot end and spoiled my K1C with DXC extruder. Plus using Creality slicer the Hyper pla has generally longer print times then cr pla. What I see to spend extra money on Hyper pla is waste of money. Best time to test different brands.

As with all crealiy items I have found them to be good value

I am using 3D printing for robotic parts and i very care for the strength of the material and the layers quality , i am trying many brands , so far this hyper pla is great The finishing is good if your printer is good And the parts are stronger than ABS .

Bom produto, funciona bem.

orjinal diye satın aldım ancak extruderimi bozdu, servise gidip değişmesi gerekti.

good quality fast delivery recommended used every day

Ich habe schon viele verschiedene Filamente ausprobiert, aber das Creality Official Hyper PLA in Schwarz und Grau hat mich wirklich umgehauen – ehrlich gesagt ist damit das Beste, was ich je gedruckt habe entstanden! ⭐⭐⭐⭐⭐ Das Filament lässt sich unglaublich geschmeidig und zuverlässig verarbeiten. Selbst bei höheren Geschwindigkeiten gibt es keine Probleme: kein Stringing, kaum Warping und eine absolut saubere Schichthaftung. Die Maßhaltigkeit ist top – meine Drucke kommen exakt so raus, wie sie im Modell angelegt sind. Besonders beeindruckt hat mich die Oberflächenqualität: Die Farben Schwarz und Grau wirken edel, die Oberfläche ist glatt und gleichmäßig, fast schon professionell. Gerade größere Projekte lassen sich super schnell und trotzdem präzise drucken – perfekt, wenn man Wert auf Effizienz legt. Auch bei langen Druckjobs läuft das Filament stabil durch, ohne Unterbrechungen oder Knoten. Das Material ist robust, fühlt sich stabil an und ist gleichzeitig so leicht zu handhaben wie normales PLA. Fazit: Wer ein Filament sucht, das sowohl für schnelle Drucke als auch für detailreiche Projekte zuverlässig funktioniert, liegt hier genau richtig. Preis-Leistung ist unschlagbar – ich werde definitiv wieder bestellen!