




π§ Elevate Your DIY Game with Unmatched Precision!
The TEMO 1/4 Inch x 4 Inch Hex Bit Holder Driver is designed for efficiency and comfort, featuring a 3.5-inch shaft and a non-slip rubberized handle. It holds standard 1/4" bits, making it a versatile tool for any project. Plus, enjoy peace of mind with US-based customer service at your fingertips.
E**N
Very handy and ergonomic
Very nice little thandle driver. Not sure why these are so hard to find. These help with not stripping small screws and give you way more torque than a regular driver.
M**C
A Great Value for Light-Duty Uses
Having a well organized set the of most popular bits, including security bits, has proved very convenient when I am looking for that special bit among all of my other tools and driver sets. From the thought that went into the design of the case to the accuracy of the security bits, it is evident that the product designers and engineers were focused on making sure the product was functional and versatile. The hinges and latches on the case are functional however the hinges are one-piece plastic strips that are prone to failure after repeated open and close cycles. The inside of the case has retainers for the bits each of which are very nicely labeled. The design of the bit retainers holds the bits tightly preventing them from getting loose in the case.One of the most important considerations for these bits is the accuracy of the center hole in security bits themselves. For the bits in this set, the center hole is dead center as one would expect. This is in direct contrast to cheaper security bits that are available where the center hole is off center seriously compromising the fit, the integrity of the bit and the security screw head. If you are considering a cheaper alternative, take a very close look at the product photos and the comments. For several of those alternative products, you can see in the product advertisement photos that the the security hole way off center. This is confirmed by many of the comments so do NOT burn your money on lesser bits.Finally, the bits cannot withstand moderaten to heavy duty applications. I began using one of the Phillips head bits to tighten down some decks screws using a standard power drill. After tightening only a few screws, I noticed a deformation in the bit (pictured). Some wear is normal for any bit especially if it slips on the screw head. However as you can see from the photo, the bit started to get chewed up fairly quick. I switched back to my older bits from another name-brand manufacturer and I finished the job with no issues. For this reason I say these bits are good for "light duty" (hand tools only) applications. I have used the small security Allen bits to repair a Microsoft mouse and another to repair a vanity faucet with no issues whatsoever.With everything considered, this product is definitely worth 4 stars. It is a good all-in-one driver set to have around the house. The savings I have realized to-date having used the small security Allen bits to repair a Microsoft mouse and another to repair a vanity faucet has already paid for this set.
T**N
Strongest magnetic driver out there.
Often, when working with screws, you need a magnetic drive to hold them in place on the driver itself...These do the job better than any I have ever used...I have and still do, use tools a lot...Put a bit on the end of this, it stays, the screws stay, the magnet is the strongest of any I've used and the bit stays in the driver too, when you pull away and doesn't fall off, like many will do...I'm getting another, maybe two.
E**R
Wide Variety of Bits and Sizes Specifically for Screws
This is an excellent drill bit set with a wide variety of bits and sizes, arranged in a way that makes sense. I just purchased a house so was in need of a variety of bits for my drill, such as putting shelves together, removing doors, assembling a crib, etc .... A search on Amazon brought me to this set over the other sets available, and I am so happy with this set. I have used the (slotted) flathead, phillips, allen, and torx bits. What is great about this set is that it has a good variety of sizes for each type of bit. Does the shelving unit require an allen wrench? Just locate the allen bits and try each size until you find the one that works. The same goes for flathead, phillips, and torx. This set also comes with an insert that is magnetized, which magnetizes the bits and thus the screws, which is handy. Once the insert is in the drill, switching out bits is a piece of cake and doesn't require screwing/unscrewing. You just pull one bit out and put another one in.The bits are steel, and appears to be high quality and strong.What I found when viewing bit sets on Amazon is that they some contain just a few sizes of what people really use in favor of a bunch of bits that are less used. Let's be honest, most projects require slotted, phillips, allen, and occasionally torx, and what you want is a bit set that has a lot of sizes for each of these, arranged in a logical order, which is exactly what this bit set provides. Yes, the set has the lesser used kinds of bits as well arranged just as logically. Also, some other bit sets on Amazon contain bits meant for screws and bits meant for drilling, including hole saws. When the bit set contains both, that usually means that there are only a few bits meant for screws (not much variety). But I needed a full complement of bits meant for screws.If you are looking for a bit set specifically for screws that has a wide variety of types and sizes, this bit set is exactly that.
A**R
Isn't snap on but does the job
Good for small tool kit but I don't think it would stand up to daily use. Very good for the price
D**D
Bought this set for a my avion camper
I bought this set to refurbish my 1966 avion camper which uses a really unique, harder to find bit. The bit so far is working okay for the camper but I decided to use a 2 Phillips bit to remove longer drywall screws in my garage and it only lasted 2 screws before it broke along with the size smaller I tried afterwards.
K**N
Great for a small tool bag on the move
Great for a small tool bag on the move
J**G
Acceptable
An inexpensive T-handle for a 1/4" hex drive. The handle is not 90 degrees to the shaft, which is sometimes more useful and sometimes annoying. If you do a lot of assembly/disassembly work - you may want to get a set of fixed T-handles in several sizes but for a quick task, this type that takes replaceable bits is a good compromise. The quality is adequate and in line with the price.
C**T
Great kit
You will love this set, great quality well made, I use it every day as a tradesman.
I**N
Excellent product
Excellent product, great selection of pieces
M**U
Five Stars
Thank you!!
A**R
Five Stars
Great product
O**S
Garbage product. Unhelpful company.
First one broke after about a month. Second one broke after 3 screws. Not using hammer or impact just driving with a 3/8in 12v drill. Company refused to even discuss.
Trustpilot
2 weeks ago
2 days ago
5 days ago
3 weeks ago