Industrial Gigabit 4-Port Ethernet Switch - Hardened 10/100/1000Mbps Fiber with 100/1000M Adaptive SFP Slot, Din Rail/Wall Mount, Unmanaged Network, 12-48V DC, 5-Port

Good quality, no issues, will buy again.

Works great with 24vDC input. Powered a 10” PoE display panel perfectly.

This little unmanaged PoE switch perfectly fits the need to feed a couple of outdoor security cameras. The SFP fiber connector allows a very extended reach ( saving on the costs for media converter and/or power injectors) and the PoE LAN ports flawlessly feed the cameras ( make sure the switch power adapter exceeds at least by 5W the power budget of the attached PoE devices) . The extended range of operational temperature makes this switch ideal for installation in challenging outdoor/indoor environment.

Super rugged construction, but could not get to work. Missed last return day by 12 hours. Probably my fault, but frustrating.

I purchased this switch to power an access point and to provide an Ethernet connection to an additional IOT device on a second port. The incoming connection is 25 feet of CAT6 cable over to a Peplink BR1 Pro 5G router and this switch will not link up at 1 Gbps on that port, the connection will only link up at 100Mbps. I needed to install a 1000Base-T RJ45 SFP module into the available SFP port to provide a full speed connection.

I'm using this in a solar powered 12 volt system to supply POE power to a couple of access points. It is working well for that. It powers on properly from the 12 volts and gives the proper voltage to the POE devices. Very happy with it so far.

This switch is remarkably well made and durable. I bought it for my boat because of its specs as hardened and durable. I expect it to continue performing very well long into the future.

I installed this into a distribution system for my house. It works great and gave me the ability to feed it directly from my 12 V UPS battery.