Kitchen Taps with Pull Out Spray Dual Lever Kitchen Tap Chrome Sink Mixer Tap Spring Pull Down Faucet with Dual Function Sprayer Brass 360° Swivel Spout Commercial

Great product. Install was easy. Works and looks great. Must buy.

An urgent replacement for an old monobloc tap that had sprung a leak in the hot pipe and had to be turned off. It took hours to get the old tap off as it had been there over 20 years and was well and truly stuck in place. However, we managed, with the aid of a multi tool with metal saw attachment and 'some' swearing on my part!I think it took three hours removing the old tap and thirty minutes to fit this new one. In fact most of the fitting was done by my wife who could get under the sink without damaging the other pipes. I was more involved in destroying the old tap to remove it! Still, if a couple of pensioners can manage to fit it then younger/fitter people should find it pretty straightforward.The fitting comes with two identical hoses. We somehow mixed up the hot and cold ends and had to undo and reconnect them. So it would be a good idea to mark them, usually hot on the left and cold on the right. The hoses were longer than needed and had to bend quite a bit to connect. Shorter hoses are available and I've now bought some as a back up, just in case the ones provided do become kinked if something moves under the sink. But so far so good after a month working well!Our sink is a metal 'flimsy' one and the old tap had always felt like it might break off if I leaned on it too much. As advised by another reviewer I ordered one of thesehttps://www.amazon.co.uk/Universal-Kitchen-Support-Bracket-MGM/ for £4-99which fits under the sink between the metal and the tap fittings. Now it feels quite solid.This tap was a bargain and pretty simple to fit once the old tap was out. If it broke in a few years we would have no hesitation getting another or similar one.

I asked the question about how to install the tails. The holes are way up inside the tap so you cannot get any type of tool up there. Turns out you just need to hand tighten them. Is a bit awkward as you don't want to leave them loose but you don't want to damage the flexi hoses either. Seems strange they don't just say that in the instructions. But once you realise that, it is very easy to install. I like almost everything about it. Looks superb and functions extremely well. My only gripe is how low the spout hangs down. It comes down to the exact level as the base of the tap. This makes it difficult to wash your hands in a half sink on the side for example. It's a minor gripe but I do wish the spout was 3 or 4 inches higher. If you have a full double sink I would 100% recommend it!!

Nice quality chrome tap - dual lever as opposed to just the one lever which I think is better as the single lever gets top much wear.Easy to fit / great price for the quality

Lovely tap

After 6 weeks it started to leak from the flexible mesh pipe.Now you know why it was less than 40 quid. Looks great, poorly made.

Tap was easy to fit, good dual spray function & reasonable price. However the plastic surrounding the holder the tap sits in is very brittle & after a few times of pulling the tap down a piece of plastic snapped off. We repaired it with superglue as we didn’t want to go to the trouble of getting our plumber back to refit another tap. I feel the design would have been better with a more flexible rubber being fitted instead of breakable plastic. Disappointing.

The hardest part was getting the old tap and fittings out. Fitting thew new tap was fairly easy follow the sparse assembly instructions. It would be so much easier if your sink unit hasn't been fitted, I had to remove the drainage pipes so there was more room as my sink was already fitted. Once it was in I was so pleased with the tap itself, sturdy and good to look at, no leaks (as yet) and works well. Good buy.