CO-Z Airbrush Spray Booth Fume Extractor & Bright Lighting, Craft Table Airbrush Hobby & Pro Model Cake Nail Art Pottery & Crafts, Portable Painting Booth 19cm Turntable, 1.7m Hose, 25W

I can confirm the 18 watt Spray Booth comes with Dual Fans and has separate switches for Lighting and Ventilation. I previously bought a Fengda which I had to return due to Fan failure. This is definitely a nicer item. It’s easier to assemble and dissemble. The LED’s are incorporated into the top panel. So no need to clip in like other units Much quieter then the Single Fan Unit To be fair I don’t think the pictures give it justice, it’s much nicer looking then the pictures I’m new to Airbrushing so I get paint everywhere. What I have done to try and keep clean is to use Laminate Sleeves with double sided tape. The best thing is it doesn’t show I’ve added some pictures Build quality (Fit and Finish) is excellent not cheap looking The only things I would change and this is only my opinion is have the Air Filter in the top panel instead of the back panel and have the exhaust duct at top instead of the back Even so I would still buy this one again

I bought the 40.7W version. Easy to assemble. LED lighting is surprisingly good 😊 Motor is fairly noisy, especially on the high setting which might be a problem indoors re family & noise interruption. Extraction is good, even on the lower setting, and this is my typical setting for most of my airbrush tasks. (I’m a beginner) The supplied extraction tube and outlet nozzle do the job well. Footprint is fairly large but the working room it provides is worth it.

Initial findings:- Spray booth delivered on time and was well packaged.the instruction booklet is good , simple layout and in colour for once. The base ,top, and sides of the unit fold out and neatly clip together.Within the unit are stored the hose outlet, electrical unit, spare filter, and turntable. Ventilator hose seems fairly substantial certainly better than most flimsy hoses usually supplied with extract fans. There are two fans side by side I had some slight difficulty in connecting the flexible hose to the push on fan cover and more so with the hose terminal outlet,but, nothing too drastic! The electrical transformer/power connection unit connects easy but now comes my single gripe- the length of the cable to the fitted plug. Purely to test the construction and check that all worked , I placed the spray booth on the table in the conservatory which had a double socket immediately beneath. Cable would not reach and I had to resort to using an extension lead. Two separate switches. One for the lights and one for the fan. Both worked fine on test. The lights give a good level both above and sides. Seems a good airflow through the filter and out of the hose terminal. I found it about as noisy as most vacuum cleaners. Not sure if this may improve when the outlet goes out of the window. In conclusion it seems a nice piece of kit. I will try to update findings after using it on the modelling I have planned over the next few weeks,

What a brilliant little spray booth, so much better than inhaling all those toxic fumes. Easy enough to assemble and pack away after use after a bit of practice. The LED lighting is superb, the fan may be a little loud for some people but as far as I'm concerned it's not an issue . It's doing it's job !!

Very hard to find fault with this, best features are the fully adjustable led's and fan. As you'd expect the fan is seriously loud on full power (but draws a LOT of air) , but turn it down roughly half way and it's massively quieter, on minimum setting it's almost silent. Very robust construction and an absolute doddle to assemble - having done it once it'll take you about 2 minutes. Very generous workspace with very effective led's providing even light from above and the sides. Most spray booths seem to be around the 80 to 100 quid mark, this is totally worth 130. The only "con" would be if you've got limited desk space as you can get booths with a smaller footprint.

After a serious operation, my lungs are a little bit more fragile, so I needed something to help me so that I could continue my passion for model making. This is one of the best products I have ever purchased for my modelmaking. It gives me plenty of light and the high powered suction takes away the majority of fumes and dust. Not only does it keep this off my lungs, but it also keeps my craft room almost dust free. I’m not sure if you are meant to, but I have removed the filter on several occasions and stuck it in the washing machine on a 30° cycle. It comes out looking almost new and keep the filter running smooth. The position of the LED lights is a huge help, when spraying. I would definitely recommend one of these kits to anyone.

Arrived on time and nicely packaged. Works as described. Single speed dual fans. Noisy but effective. Only 2 of the 4 led lights work. Outlet hose needs duct tape to secure end nozzle. Can’t be bothered to pack it up and return it. Unless something else fails in the next few days.

This spray booth is just fantastic for my airbrush, and the led lights are really bright .👍

Ottimo acquusto

C'est la plus belle chose utile que j'aurait dû avoir depuis longtemps, le filtreur laisse rien passé comme vapeur ou fumer la machine fait sont travail. Pour les amateur d'auto ou camion en modèle réduit c'est une machine que je recommande.

The unit is well built portable and easy to set up and operate.

Pensavo di aver risolto il problema della verniciatura in ambiente chiuso, ma non è stato così. Il prodotto sembra essere di buona qualità costruttiva per quanto riguarda i materiali ed anche l'illuminazione fornita dai led è buona; si monta facilmente e in poco tempo, inoltre una volta asemblata risulta anche piuttosto stabile. Anche la rumorosità della ventola risulta accettabile anche non si può dire contenuta. Tuttavia l'aspirazione mi è parsa insufficiente: l'ho utilizzata due volte usando una comune bomboletta spray per dipingere dei ponti ferroviari ma è stato necessario indossare la mia maschera protettiva in quanto l'odore della vernice aveva riempito la stanza nonostante il breve tempo (un paio di minuti) utilizzato per la verniciatura. Non l'ho ancora provata con l'aerografo, forse con tale tecnica le cose potrebbero andare meglio. Ad ogni modo sono rimasto deluso dal risultato in quanto non risolve il problema della verniciatura in ambiente chiuso, pertanto non la ricomprerei. Dopo questa segnalazione voglio segnalare la correttezza del venditore che si è prontamente attivato per cercare di risolvere il problema dimostrando così al di là del problema una serietà professionale ed una attenzione per il cliente che non tutti hanno. Per questo sinceri complimenti al venditore.

It’s very compact and works well.