SEALIGHT LED Brake Light Bulbs, 3157 LED Red 3057 4157 T25 3156 Tail Light, 2600 Lumens Red, TailLight with Projector Lenses, Plug N Play for Rear Stop Light, Automotive Parking Light Assemblies, 2PCs

Recently the high-beam bulb on my 2007 Harley Street Bob burned out so I decided that instead of dropping money on a new bulb I'd start researching getting a new LED light for my bike. I didn't really want to drop $300+ on a light so I decided to look around on Amazon and I stumbled upon these based on reviews and price. The most difficult part about installing these wasn't even putting the new light in, it was actually taking my old one out of the socket plug. It was jammed in there so hard I had to use a screwdriver to pry it off, so if you have never changed out your light on your bike this might happen to you. Also one thing I want to point out is that the overall depth of the light is MUCH deeper than the stock headlight, so you kind of have to fiddle with the light to get it to stay in there. I was a bit worried that the plug wouldn't stay in. On the topic of the plug, it looks like the LED plug doesn't quite go in "all" the way, but it seems to be maintaining good contact; I did use dialectic grease on the leads. Overall it took me about 15 minutes to install but that was ONLY because I couldn't get the old one unplugged. If I got that off right away it would have maybe taken me 5 minutes top to get the new one installed. All I have to say is, WOW...the light is day and night different (no pun intended) in brightness. The light is pure WHITE and not that horrible off-yellow. I can actually SEE at night now. I can take desolate 2-lane roads without fearing that I'll hit something because I don't see it. The low beams are extremely bright, but the high-beams are just FIERCE. I am extremely impressed by the looks and the brightness of this light. Also I keep seeing reviews on this product about headlight fogging and I personally have not seen it yet. I took my bike out when it was about 40-45 degrees out and I have not experienced any issues with fogging. Now, maybe these people are having issues when it rains, but the instructions even say that some fogging in the lamp is normal, so I don't think it's anything to panic about even if it does happen. Overall, I am extremely happy with this LED light. Quality seems good and I haven't had any issues with battery drain (I've heard people say that these cheaper lights drain your battery); absolutely no issues there. If you don't want to drop hundreds of dollars on a new light on your bike get this light! It's worth every penny; I feel so much safer now with this beast installed!

Threw this in some clear housing and WOW they are bright! No need for me to use colored lenses any more! Super bright an a nice deep red color

💡 I recently upgraded my vehicle's reverse lights with the SEALIGHT 3157 LED Bulbs, and the difference is remarkable! 🚗💨 🔆 These bulbs emit a crisp 6500K white light, providing a 600% increase in brightness compared to traditional halogen bulbs. This enhanced illumination significantly improves visibility when reversing, especially during nighttime or adverse weather conditions. 🌙🌧️ 🔧 Installation was straightforward, thanks to the non-polarity design and compatibility with standard 1/8" NPT grease guns. The built-in resistor ensures error-free and flicker-free operation, eliminating the need for additional load resistors. 🔌 🌟 Whether you're upgrading your backup lights, tail lights, or daytime running lights, the SEALIGHT 3157 LED Bulbs offer a reliable and efficient solution. Highly recommended for those seeking improved lighting performance and safety on the road. 👍

Very bright and work great. Resistors will most likely be needed!

I had bought other LED bulbs that claimed to be error free. They had hyper flash issue. I ordered these and they are amazing. Super bright and a nicer blinking pattern than the original bulbs.

I had previously purchased Sealight bulbs for our Toyota Highlander and installed and had them worked without issue. I thought with this being the case I would be able to the same with these bulbs for our Tacoma that had a burned-out bulb, but that has proved to be anything but simple and possible. Before making a purchase of these bulbs I inquired with the company to ensure correct bulb selection and operation without issue for my vehicle. I was assured these bulbs would work without issue. Once I received them it has been nothing short of a very bad experience. The bulbs themselves do not just plug into and fit into the factory receptacle easily - there are little nubs on both sides of the led base fitting that make it difficult to push in (it should be noted from reading other buyer's product reviews I'm not the only person who has had this happen). Once I got the bulbs installed, they powered on but the same hyper flash from the OEM bulb burn out was still occurring with these new LED bulbs. It took numerous calls and emails to Sealight to reach someone who then asked all kinds of questions but quickly told me they'd ship me a decoder and I could expect to receive it in 3-5 business days. I asked for the decoder product details (picture and "how to" install) and was told they'd email it to me. I never received any email from them. After waiting well over 5 working days, I emailed Sealight twice over three days before I could get a reply. They thanks me for emailing them and stated thanks to my email they had now shipped the decoder (obviously they never even shipped me the decoder from contacting them before). And again I sent them an email asking for decoder product info (picture/install instructions). They never sent anything again. But then today, surprise - the decoder (I'm guessing) showed up. I say I'm guessing because it was not identified as a "decoder" anywhere on the package, product, etc., the package return address was in some person's name and the small package had a ziplock that contained two short wires with 1 set of hollow blue plastic plug looking things and another of the same in red with about 4 or 5 small zip ties. That was it - no instructions were included, no product description or anything letting you know what this was, how to install or use. I tried calling numerous times, leaving a message for a call back numerous times and received no call back. But I also sent an email and got a simple reply which had a very brief 3 sentences/steps on how to. They also ended the email stating "the resistors will emit a lot of heat when working please avoid contact between resistors and other plastics in the assembly." WHAT THE WHAT?!?! This whole thing was largely plastic - blue and red loose hollow plastic looking plugs with plastic coated wires - REALLY?? Avoid plastics in the assembly?? What part is a resistor, how does it wire into with the socket and the bulbs, what do you zip tie to what and how in the world do you "avoid plastic" with such a set up? This whole thing has been totally ridiculous! A simple burned-out bulb that needed to be replaced - I'm not sure what is more nuts - them for conducting business like this to a customer or me for even trying to do business with someone like this. What kind of way is this to treat a customer who is obviously having difficulty with their product and who has tried hard to understand how to best use their product and avoid having ANY issues?? From my experience THIS COMPANY AND PRODUCTS ARE REALLY MESSED UP and the LACK OF CUSTOMER SUPPORT AND SERVICE is pathetic and INEXCUSABLE! I'm sorry I ever purchased Sealight bulbs previously and especially now. But I'm very glad that Amazon covers the return as these bulbs as they are being promptly returned. I'M NOT EVER PURCHASING ANY SEALIGHT PRODUCT AGAIN and seriously DO NOT RECOMMEND SEALIGHT PRODUCTS REGARDLESS especially based on the product design, poor customer support and service (think about it, even if their product appears to fit and works and the price might be good, if you ever have any issue with their product, whether at the beginning or later on (like a warranty issue), forget about being able to trust that anyone at Sealight will help take care of it for you). I'm done with this and done with Sealight. I really hope that anyone taking the time to read this will understand and take into serious consideration this information before purchasing any Sealight products!

Nice and bright, using white led’s in my new tail light assembly made the brake lights look pink. So I switched to these red led’s, just as bright as the white ones, but a rich red color instead of the washed out pink color.

Primero compré un faro muy parecido y un poco más caro en mercado libre y a la primera salida a rodar se le metió el agua, lo regrese y opte por comprar este faro y la verdad que la calidad es de primera, no dudes en comprarlo, es lo mejor que vas a encontrar después del original de Harley!

Works Great on my 08 Ram 3500, nice and bright.

whats the point of an LED than cant be brighter than the halogen it replaces, specially at this price. Would not have bought had known the performance of these. felt wasted in this purchase. both bulbs worked on installation. but quality felt average. Longevity will be reported if any falls short

Excelentes focos,le quedaron muy bien a mi avanza y alumbran muy bien,muy satisfecho con los resultados

Outstanding