36x84 inch (Double 18×84 inch Door) Sliding Barn Wood Door Slab with 6.6ft Hardware Kit, Requires Simple DIY Assembly

Great value. This door arrived in great condition with all the hardware. It went together easily - I put it together initially without glue to make sure all the boards fit correctly and then disassembled and applied wood glue and screwed everything together. No issues whatsoever. We stained the door and it turned out great. Be advised - if you need to trim the left or right side of the door for a custom fit, it can expose the small particle board core that I did not realize was there in the center of the left and right 2X6 boards. I would buy this door again without hesitation.

We priced custom barn doors and they were pricey. We ordered these, they went together easily and they came out beautiful! We get compliments on them all the time. The quality of the rails is really nice and the doors open and close with ease. They are a beautiful addition to an otherwise boring hallway with a very dysfunctional regular door, on a small laundry room. I originally thought I would paint them but was wanting a nice smooth finish. Without spending a lot of time sanding, we were not going to be able to achieve that. If you're wanting a distressed, painted finish they would probably come out beautiful. Since that's not the look we were going for we ultimately decided to stain them instead. We are very happy with the finished result. Since these are in a hallway, we opted to purchase handles separately so that we could choose something flush. Definitely recommend!

This door is beautiful. It has a great smooth finish. It was very easy to assemble and every part was indiviually wrapped and marked all you need is some wood glue. Definitely worth the money

Door quality was great, hard ware seemed ok, nothing was labeled per use of instructions, went together fine assembled in under an hour. Holes were pre drilled, dowels for side screws didn't fit flush more or less just plugged the hole so it didn't appear deep. Remember the door height is the measurement without the rail wheels, add 3-4" for that if it pertains to a space issue. My only gripe was the screws provided for the front slant pieces were barely long enough to bite it on the under board and were not black like the rest of the hardware, I ended up using "1 1/4 black sheet rock screws and the look is much better and they bite all the way through with out exiting the opposite side.

The door I really good wood, easy to put together. The directions are easy to follow and the parts are well labeled. Solid wood

We purchased these and then stained them ourselves and attach them to our pavilion at our wedding venue. They are quite heavy and sturdy, but close nicely because of it they are nice quality and took well to the stain. We purchased four in total two on each side of the pavilion. Easy to use and customize.

The only thing I can say about this product… Absolute garbage! When trying to decide which company to use for my sliding door, I saw some of the reviews, but worried it might be an installation issue. To be clear, I have built three doors from scratch already, but decided to buy one this time to save some time. What a joke! The instructions and product looked amazing at first, and I spent time staining and putting it together according to specifications. After installing it slowly shrink over the next couple of months. Now, when I say it shrunk… I am not saying an eighth of an inch, I’m saying close to an inch and a half. As you can see in the pictures, you can literally see through the door at this point. I spent a lot of time finishing this to have it split and ruined as it’s hung up. This is directly due to them using wet wood and not drying it. Upon contact, they stated it was made to flex and that this is supposed to happen with wood… I told them this was not correct and that it was from them using wet wood at which time they sent me new doors. If you do decide to purchase this product, I highly recommend you leave it out for some time to dry prior to putting it together and installing it.

This door worked perfectly for what we needed. We chose this for a closet door in our living room. If you follow the manufacturers instructions, the door assembles easily. We stained and polyurethaned the pieces before we put the door together for best coverage. I would say it’s about a 3 day project with staining, polyurethane, assembly and installation and 2 if you are just painting. Day 1 paint , Day 2 assembly and installation. Good value.