SUNLU Official Filament Dryer S2, Upgraded 3D Filament Dryer with 360°Heating Fan, Filament Dehydrator, One-Key Set with 4.6" Touch Sreen, Compatible with 1.75 2.85 3.00mm PLA PETG ABS Filament, Black

This drier is really nice for the price. It runs up to 70c and heats evenly. It is effective at drying nylon, the controls are good. The humidity sensor does the job and by that i mean you can just turn the unit on and when the humidity stabilizes at a low value it is done eliminating some guess work when you don't know how damp a filament is. People complain about it sealing to much or lack of external fans but i don't see the issue there. It leaks enough air to let the moisture out and fewer parts to break seem like a win to me. I even use it to dry spools filled with desiccant, it takes a while but it can process quite a bit at once in a controlled manner.

Best filament dryer I have used. The standard function of the dryer is great. Heats up to cover multiple filament types. Has a fan to keep the airflow moving for even drying. Where it excels is the LCD touchscreen. Easy to set parameters. Easy to adjust parameters during drying session Easy to check current humidity level while you are drying. Being able to know if the filament has removed enough moisture is one of the most important things you would need to know. This is the only dryer I know of that offers the sensor to report current humidity level. Works great! Easy to setup and use!

As often I did a bit o research and eventually settle for the SUNLU. THe unit seems to be well made and the large lcd is easy to operate. I did not test humidity levels with other instruments but the readings seem to correlate with the temps. The other reason that leads me to believe that works is the same that took a star away. Without using the 3D part that someone cleverly designed and made available on thingiverse which is essentially a spacer that leaves a gap open, the humidity stalls well before the optimal range of around 20%. Given the simplicity and effectiveness of the mod, the solution should be implemented by the manufacturer. Al in all, if you set your expectations right, this is a great little unit that does what it should for a good price. Happy printing.

Had to figure out how to turn it on, but after that it worked great. (Double click the on/off button.) Very impressed with the touch screen. Heated up quickly and holds temperature steady. Relative humidity went from 55% to 20% in just a couple hours. This was while drying ninja flex. Can set the timer for much longer than other units. The temperature goes all the way up to 70C to dry nylons which is a huge upgrade. By far the best filament drying unit on the market for this price. The only thing I would change is making the hole further down on the container. I place it on top of my lack table for my Prusa. If I use the filament hole there is a lot of friction when pulling it out and down. This is really only an issue when printing ninjaflex because the filament stretches, reducing its volumetric flow. Right now I just have the lid slightly propped up and run the filament through there. Similar to the last model. Some of these other reviews thinking the filament will loose significant weight during drying is a little far fetched. Maybe nylon. Then feeling humidity come out when opening the lid made me laugh. If you want more venting prop the lid up slightly, but it may be tough holding it at 160 degrees F. I never write reviews but am very happy with this product. Will buy another one soon.

Decent unit for single rolls, i dont use a lot of filament so mine tends to go bad quickly when it sits, but thanks to this unit i was able to salvage all my old rolls.

Why did you pick this product vs others?: Great filament dryer, runs well and able to use this with P1S for running TPU without issue.

I've never had a need for a dryer after printing for 5 years, but recently got some moist filament and decided to give this a try. It has been very useful since. It has fairly high temps to work well with a good range of filaments. I don't feel limited by the temp options at all, Nylons, PLAs, TPUs, all work for me. The touch screen controls are a little fussy and could be improved, but they are workable. All and all, it offers a solid feature set for the slightly high price. The biggest downside of the dryer is not having a way to vent the moisture taken from the filament. If you literally just just the lid after 30mins of drying the humidity drops by a few points. But its annoying to have to continue to do that. I, like many others, just prop it up by 5-10 mms and let it dry. That works well, and will get you down to 20% humidity or so in low humidity areas. Note, it does struggle to get down to 20% relative humidity in environments of more than 60% humidity. For example in summer, I struggle to get under 25% when done, and in winter I commonly see 15%-18%. The last downside, which is still pretty significant, is the hole placement for the print and dry option. The two holes are set at completely terrible angles to the filament roll's natural position. Not sure how they screwed that up. For TPU, the out of position holes work fine, but for brittle filaments its nearly useless. That sucks because printing while drying is MOST important for brittle CF infused engineering filaments or light weight PLAs. I've modified mine with a little PTFE tube and its working well, but this is engineering that I shouldn't have to do, especially when this unit is in the upper range of the basic unit prices.

I love all my Sunlu products from filament to dryers to pens and joiners, I've never been unhappy with a Sunlu purchase. The Sunlu S2 is a great filament dryer that I use to condition new rolls of filament before initial use and recondition old rolls before using again. The touchscreen is very easy to use and I wish the S1 could be upgraded to a touchscreen but it's okay. I have three S1 dryers, and this S2 is my second, but I also have an S4 for setting up big jobs. I can't say enough good things about the S2 and Sunlu line-up of products. Very happy. I would even say Sunlu needs a Core XY printer in their lineup!

A lot covered by others, but a couple of key points: 1 - there is a fan in the S2, and it isn't too loud in my office; however, I wouldn't want it in a sleeping area. 2 - The unit does dry the air and circulate it. Unfortunately it is an entirely closed loop (not hermetically sealed, but not a lot of leakage), so the moisture released just travels around the anulus around the filament spool. I found that if I lifted the lid for about 5 seconds and then closed it up again the humidity generally dropped by 1-2% per the incorporated meter. I don't know if this is real, but it seems likely. A future design upgrade might be some sort of limited draft vent to bleed off some of the moist warm air - it is really all about driving the water out of the filament by heating it, so letting in a small volume of damper room air is inconsequential in the whole scheme.

Como digo, es una muy buena caja de secado, económica y funciona correctamente. Deja configurar tiempo y temperatura, aunque si le pones el tipo de filamente te ayuda a establecerlo por defecto. Realmente quita la humedad y el filamento se imprime mejor. Sunlu muy bien.

degene die ik heb ontvangen was defect. verhit altijd maximaal ongeacht van de instellingen. het verhit zelfs als het op standby staat!

Very useful filament dryer, especially if you print regularly. Temperature control works well, the fan provides even airflow, and moisture removal is clearly noticeable after drying. I’ve seen improved print quality, fewer stringing issues, and more consistent extrusion, particularly with PLA and PETG. The unit is easy to use, quiet enough, and fits standard spools without problems. A great addition to any 3D printing setup. Good build quality and excellent value for money.

Der Filamenttrockner funktioniert einwandfrei und ist verständlich zu bedienen. Ich kann ihn empfehlen.