Hiweld 4 Space 8 Circuit 125 Amp Load Center with UL

This was handy for my outdoor AC units. As far as the box goes there is some soft plastic parts and you do need allen wrenches to connect the wires. This box has the easiest KOs I have ever used.

Great Buy !

It work

The box is thin, the knock out is so clumsy. Would not recommend.

Good quality! Knock outs not easy to get out without chipping the paint. Had to touch up all the barf Metal. Overall pretty good

This was not to the same standard as USA made. The thickness (gague) of metal used, cause a problem for the KO’s to be used. Selection of sizes jumped from .5” to 1.0 I needed .75” at bottom left and right side. I decided to drill out with multi-stage drill and the 1.0 popped out. I attempted to use KO punch instead of drilling the side and it popped out 1” Had to use plate from top hub blank, to cover hole and re-drill.Lost over an hour in labor to correct.The gasket required for Hub was way to thick, standard hub screws provided with Square D Hub were to short. It’s good I have to install 4- breakers, all breaker KO’s popped out when attempting to remove one. All due to the gauge of metal used.

There are three major things that make this sub-panel unsuitable for deployment.1) There is no ground bar2) The lug nuts for holding the line feeds AND neutral wires use Allen Wrench bolts/screws instead of standard flat head bolts/screws. That in itself is bad enough but to make matters worse they are three different sizes causing headaches for installation.3) Saved the dangerous part for last. The neutral bar snaps into cheaply made plastic that does not hold it properly in place. The natural bending or pressure from your wiring cause the neutral bar to pop out of the plastic holder and could easily come in contact with the surrounding box or worse yet, come in contact with your hot line leads.After trying to make a safe professional installation, I gave up and threw it away and purchased a higher quality panel.

Used to add a breaker for mini split install worked out great now have extra breaker if want to or have to add another one in future