Gifts for Men,Damaged Screw Extractor Set-Father's Day Gifts from Wife Daughter Son,Mens Gifts,Husband,Stripped Screws Nuts & Bolts Drill Bit Tools for Easy Removal of Rusty Broken Hardware Gifts

I rarely write reviews, but these screw extractors were such a lifesaver that I felt compelled to share my experience. If you’re struggling with stripped screws, stop wasting time with DIY tricks and order these immediately.I recently faced a huge challenge while preparing to move: my expensive West Elm tables (worth over $1,500!) were held together by screws that were completely stripped. I tried every hack I could find online—rubber bands, liquid gripper, you name it—and nothing worked. I was about to give up and leave the tables behind when I stumbled across these extractors on Amazon.Not only did they arrive the very next day (thanks to Prime!), but they also worked flawlessly. The process is simple but critical:1. Use the drill side to bore into the stripped screw.2. Flip the bit to the extractor side to pull the screw out.Following these steps, I was able to remove the screws effortlessly. These extractors are an essential addition to my tool kit now, and I’ll never be caught without them again.For around $10, these tools saved me hundreds of dollars and a ton of frustration. The quality is outstanding, and they’re compact enough to store easily. If you’ve got stripped screws to deal with, don’t hesitate—these screw extractors are worth every penny.

It seems to function quite well, so far. It is certainly simpler to remove screws with this than other kinds I have tried which require the use of a wrench, this can just go in your drill and remove it (already a large step up), though you'll probably have to try a couple of the sizes to get the right fit.Just remember, if you are going to try a larger size, do not re-drill the hole using the little drill bit for the larger size, just go straight to the removal part

Highly recommend these! They work perfectly and do a great job when working on projects if I run into an old rusty screw

I don’t own a welder, hammer, punch, chisel, and sweat will usually do the job, but this saves time and stress. Not professional quality, not the highest hardness, but the price was very good. Penetrating oil helps, heat will also help, and swear equity.

This screw extractor set is an absolute lifesaver! I had several stripped and rusted screws that I thought were hopeless, but this set handled them with ease. The bits are durable, well-made, and fit securely without slipping. I really appreciate how clearly labeled and organized the case is—it makes it quick to grab the right size. Whether you’re a DIYer or a pro, this is a tool you’ll be glad to have on hand. Highly recommend!

I have an old Toyota Tacoma that I have been working on. I was removing one of the fenders when a small mounting screw head snapped off, leaving the remainder of the screw in the frame. I soaked the remaining bit of the screw and the hole with PB Blaster for a week, hitting it with spray at least once and sometimes twice a day.I felt like today was as good a day as any to try to get the screw out. I again soaked the remaining bits with PB Blaster, wiped away the excess, and attempted to sink the drill side of the #1 extractor bit into the screw. It spun, but had no impact. Not wanting to potentially snap off the bit, because I know how fragile they are, I switched to a left handed drill bit that was the same size as the #1 bit in the kit. After the hole was started and I saw that I was going in straight, I switched back to the drill side of the extractor bit and got it to sink into the hole, down to the stop on the bit collar. I flipped the bit over and attempted to extract.Using a drill on a slow speed, making sure not to put too much force behind it, I saw that the bit wasn't extracting, instead it was grinding away the metal stem of the screw. I applied slightly more pressure and saw that it was just grinding away more of the stem. I stopped with the #1 and switched to the #2 bit. This time to make sure that I wasn't going too fast, I used a 1/4 inch collar/guide on the bit and fit the other end of the guide onto an Allen wrench. Applying minimal pressure and turning about a quarter turn at a time, I finally got the #2 bit to bite. The bit was down inside the screw and decent amount. Since the #1 hadn't extracted and instead ground away some screw material, the #2 was seated really well in the screw body.Now with extractor seated and biting, hardly applying pressure, I pressed the allen wrench slightly to the left, and that's all she wrote.Now the extractor bit is buried in the screw, making the job infinitely harder since you can't drill through it.I read that a grinding bit in a dremel should be able to grind the extractor bit down and hopefully cause it to crumble. I just destroyed one grinder bit trying to get through it.Now I am looking at buying another "rescue bit" to remove the extractor bit that is broken off in the screw. I should have just left hand drilled the screw out as best I could. This thing is more of a headache than it's worth.

I edited this review as I used the small drill but and then the next size up for the extractor. Worked like a charm. They should add that tip to the instructions as I had to watch a few videos to get that one. Not sure if it was because my screws are in joists in the basement ceiling but the extractor side would not work. I started with the smallest drill size and when I got to a certain size the top fell off. Then I used the smallest drill side and used a square bit to extract the screw. This worked on 4 screws... Yes I stripped 5 screws lol. I've learned my lesson to predrill well and go slow. It was not easy work getting it out of the ceiling but I think these tools are the only way this was happening as they are inside a curtain track. They may way to include a few small standard square bits.

I am sure this works in some projects, but the broken nut I have, this did not work following the instructions. I do know mostly these are hot and miss, and there is no real guarantee.