Privacy Window Film: Translucent Static Cling Treatment for Home Security and Decorative Frosted Glass Effect - No Residue, Heat Control, UV Prevention, Easy Removal (Winter Frost, 36 x 72 inches)

I cut the film to fit exactly (30 x 41) because I was installing on a skylight over my head. The hardest part was getting a lot of it clinging to the glass at once and then repositioning it. This is probably the hardest installation possible (standing on the top of a six foot ladder with your head in a skylight.) Once I realized I could keep part of the film in place I could position the rest accurately and then adjust the first part to the correct position. On a door or window this would be stupid easy. I used a credit card as a squeegee with many small strokes to remove the water underneath the film. This worked fine. On traditional window tint this would not be fine as it would certainly damage the film. This vinyl film us much thicker and it does not stick to itself like traditional window tint. This is MUCH easier to handle. And if it all goes wrong there is no damage and you can simply start over again. I did not know what to expect exactly but I am very happy with the results and the material is a piece of cake to use and reuse. The installed film looks great and the light sparkles as it comes through. The illumination is broad and gentle giving a pleasing light to the room. The heat is stopped and the UV is stopped. This is a terrific window film. I am buying more to use on more skylights (that I had not thought to do before.) PS This is quite the glowing review but it is legit. This stuff is cheap and works great. Their warranty actually is no surprise, after my experience with it. They say no questions asked money back and you keep the film. That says a lot about this stuff.

I have tried different films in the past and did a lot of research this time. I found some fantastic bargains only to find out from the reviews that they curl, fall off, and so on.I settled on this one and it has been a dream. Very easy to measure and cut since it has a grid on the back. Nice and thick but clings and repositions well. It doesn't curl, it doesn't fall off and it looks stunning. It has been by far the easiest one I ever installed and creates the prettiest effect.

This product went on pretty easily but I would recommend having ideally two other people help you when working with large pieces (one to hold the top edge and another to line up the bottom). It works great for privacy. You can't see anything unless it's right behind it, day or night, lights on or off. The one issue I had with this product is that it came wrinkled badly at one end so it wouldn't lay flat. This may be fixable with a hair dryer but I dont have one.HOWEVER there's supposed to be the no return necessary money back guarantee. Tried to contact them to do so and I was only able to contact Amazon customer service who want me to return it. How am I supposed to return something that was unrolled and unstuck before I realized the issue??

I used this for the sidelights by my front door. It does an excellent job letting in light but giving me the privacy I want. The directions to cut and install were excellent and everything worked quite well. However, I learned a couple of things in the process that should help you with a better result. 1. Measure very carefully the actual dimensions of your glass, and then cut the film about 1/8" less than your measurement. This will give you about 1/16" on each side that will allow you to accommodate the natural variances in the window (I learned quickly that the window glazing etc. is never perfectly straight).2. When you cut the film, it is best to use a straight edge (long metal ruler etc.) and cut with fresh single-edged razor blade or new X-acto knife. This will give you a very clean cut with much less risk of ripping that might happen with a utility knife.3. Make sure your window is VERY clean ... you don't want any dust or lint particles from your cloth ... microfiber is good. OR, if you have an eCloth or Norwex cloth, those work really well.4. Apply the water/soap mixture liberally to the film before applying ... the wetter the film, the easier it will be to maneuver into place. So yes, make sure you have rags on the floor under the window!5. Work the water and air bubbles out from the center moving outward, focusing on the upper part of the film first and then slowly work down. If you make sure your top edges are aligned, the bottom will work itself out (and people will notice imperfections near the top far more than any at the bottom!). Above all, take your time.6. Finally, if you discover that an edge of the film overlaps some of your glazing or wood, don't try to cut it while the film is still wet because you'll just rip it; wait for it to dry so you can make a clean, sharp cut. As long as you have worked out all the water and air bubbles, it should adhere very nicely to your glass.

I wanted something to cover the bathroom window without blocking the light. This film was easy to install and has held up throughout the years!!

The media could not be loaded.  The Rainbow Effect Window Film is FASCINATING. Changes colours depending on where you view it from/the time of day (more blue-pink during the day, and purple-gold at night). Casts gorgeous colours onto nearby walls/fixtures when it's light out. My only qualm is that it lets in less sunlight than I'd hoped, but filling the room with beautiful colours instead is what keeps this review at 5 stars.Extremely easy to install: it is not sticky at all, so it won't stick to itself/you/the cat while trying to put on. Instead, it relies on water + dishsoap to stick, which means that it can be moved around plenty to get the perfect positioning before it dries. Instructions on the back are precise and helpful. Very easy to get bubbles out, if they happen, and while it will not come off on its own, it is very easy to take off and put back on if need be.

Good quality easy to install

Very pleased and really cool effects depending on lighting