Bestronair 20 in Wall Mount Fan Oscillating Wall Fan 3 Speed High Velocity Wall Mounted Fans Heavy Duty for Garage, Patio, Industrial, Shop, Commercial Indoor Outdoor Metal Fans

Great fan, moves a lot of air . Great for the garage

Powerful, reliable, easy to install. Have it running 24/7 in my greenhouse.

Fan stopped oscillating after a short time of usage (approximately 10 hours). Ordered June 18, delivered 20 June, stopped oscillating after four uses, but the fans still works. **Update*** Amazing customer service! They reached out to me immediately and resolved my issue promptly. I love this product and I truly appreciate the customer service. I highly recommend doing business with this company.

This initial review cover's the > Bestronair Wall Mount Fan Oscillating,Industrial Heavy-Duty Metal 3 Speed Fan, 22 Inch. 2024 WARNING > Safety Hazard - Read detail's down below. Bought this unit to replace a different Outdoor, Wall Mount Fan, Oscillating, Industrial, Metal 3 Speed Fan, in Stainless Steel, in our back Lanai & cedar deck, that had rusted beyond repair, after about 7 years. . By comparison, the Other fan was definitively an Industrial, Heavy-Duty, in Stainless Steel, solid / heavier, and, with a modern, sleek, stainless steel appearance, and like many other dated items on AMZ, no longer available. This Bestronair Wall Mount Fan, is black on black finish, and was just installed a week ago. Pro's - nothing to report, as it's new. Con's - here are some obvious things to point out. 1. Caution > The fan metal cages are Not Industrial, Heavy-Duty. Metal. Here's why, although it was well-packaged without any obvious box damage, the fan metal cages were Bent outward, losing the metal cage curves, that allow the 2 cages to FIT together. 2. This was not obvious upon opening the box, but wasn't noticed until it was being assembled on the wall. Had to Bend back in place a pie-section, by hand, in order for the retaining clips to close. The metal cage's are SOFT metal, so if by chance the front metal cage shakes the closed retaining flimsy clips, via operating vibration and it hit's the floor, you will have a Problem. 3. Caution > Long, S-Curved fan support - it has a WEIRD long, S-curved fan support that fit's into the Wall bracket. 4. Wall bracket - appears to be the ONLY thing made of solid steel, but, the included metal screws are a JOKE, based on the fan's Weight x the Law of Gravity. They are worthless, so use your own bolts. 5. Caution > Fan Control Design - must have been designed by a Panda, that was a humanities pre-college major. THERE is a reason why you don't see a separate Large Photo on their landing product AMZ page. It has 1 electric cord, about 9-inches long that exit's the Left side of the fan, and, attaches to the TOP of the control. The 2nd electric cord, exit's the TOP of the control (Not the Bottom), almost buddy-taped to the 1st cord on Top. This Bad design automatically creates two (2) big Restriction's - The placement of the Fan-to-the-outlet, and the placement of the Control, when the fan is ... wait for it ... Oscillating 180 degree's. . Recommend that before mounting the fan, measure the length of the A/C cord to the nearest outlet, and Add about 8 to 10 inches. Same principle with the Manual Control, but with the fan mounted, you will have to figure out like I did about where to install the control. Other than these Con's ... the fan does work ... for now. TBC. Photo's- will try to get some and post as 'proof-of-life'. ... Update June 2024 > Safety Hazard Issue ! Read Carefully. Don't waste your time ... it's cheap junk. The "Wire Cage" is very soft metal, arrived with the front face piece that was bent, and so it is NOT stainless-steel like the one it replaced. 1st main Issue - furthermore, the Fan's Main Support Bracket (cheap plastic) broke last week, and the fan came crashing down ... luckily no one was around, but we did hear a loud crash, and went over next door and saw the mess. 2nd issue - is the giant deficit in engineering the "Speed control unit" which is extremely awkward to set-up. I had to create a separate Support for it, so it could be placed in a location where the cord could actually reach the wall plug-in. Spend an extra $50 to $100 bucks and get a Quality Wall Mount Fan for either Indoors or Outdoors. For Indoors - recommend Lasko wall fan's as they are affordable, reliable, easy to mount and easy to take apart to clean. Some are made with a Remote control, which is cool (pun intended). DSM DSM .

Good fan , moves a lot of air , went up easy. Be sure to put blade on correct!

This fan was installed in my garage as it gets very hot in there. It made a slight squeaky noise the first week or so but that has stopped and is very quiet. I run it 24-7 and works even better that I had expected. Update Unfortunately, I turned it on again after not using it for a while and it no longer works. It has a 2 year warranty and it is only 6 months old. Hopefully this will get resolved.

Ok, I blame myself for this. When I did a search on Amazon, I searched for "Oscillating Remote Control Fan." Was in a hurry to get a replacement due to a house full people coming in a couple days. When this fan arrived I found that I should have READ the description more carefully! Yes, this fan has a remote... but the controls are REMOTELY mounted on the power cord. It is a decent fan. Good air flow. Has a separate ON/OFF switch for Oscillating function. So, this fan DOES NOT HAVE A WIRELESS REMOTE.... But it still was a decent purchase. Just not the convenience I thought I was ordering.

Fan set up and installation simple. The fan runs smoothly and quietly. I first had concerns, after reading some of the other reviews, but works and performs perfectly.