300 Pcs Barbed Connectors Drip Irrigation Fittings Kit, 1/4" Drip Irrigation Kit for Garden Flower Pot Greenhouse Lawn (Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling)

Best price ever. Quality os pretty much right there with rainbird. The plastic is a little shiner but I'm not sure why I would pay almost 2 times more for what I think is the sane. Aslo this kit has a lot of options unlike big name brand ones.

Tired of going to the Big Box store and buying these things piecemeal and paying through the nose? I was! And this is the answer! I've used a couple of the fittings already and they are every bit as good, or BETTER, than the ones from the store...and I don't always run out half way through another little project!

This is a nice set. Although this is the one and only time I would prefer the container to be slightly bigger. It was stuffed full, and when I stuck my chunky fingers in there, it would spill out, so I switched to the container.

if you live in a dry climate like i do, then you know how often your garden irrigation cracks and breaks. this kit is a life saver to get my garden irrigation back up and going. so many pieces with plenty to repair multiple times. i will buy this kit again when i need to repair the system

Despite the remarks from other buyers/users who complained about how tight the tolerances were between the pins and their irrigation lines, the tolerances are perfectly tight. Better tight than loose and not keeping connection. Carrots, radishes, cauliflower, peppers, tomatoes, and more are thriving in raised beds in Georgia. Connections were made in below 70- temps with only the stake end of a small garden sprinkler heads to expand the hose before joining.

This kit has everything I need for drip line hose connectors. They seem to be just a touch larger than the big brand version but also seem to be sturdier. The carry case makes it easy to grab what you need.

These connectors are what I needed for my drip irrigation. I used 1/4" tubing, quick hint - if you have a heat gun heat the end of the tubing (just for a few seconds) and the connectors slip right into the tubing.

Standard 1/4" tubing is .17" I d. The couplers are .25. There is no way to make them fit. Boiling the tubing still doesn't work. I took them down to .24 with a Dremel sanding barrel and they fit beautifully. Now, the t's have 2 barbs. The first one is .22" and the second is .25" so the tubing fits over the first but not the second. That has to be sanded as well. The El's are .21" and the fit well. If you buy these, be ready for a project! Pros: the price is great or get a name brand.