Ender 5 S1 Frosted PC Build Plate Magnetic Flexible Bed 235x235mm for Creality Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/Ender 3 S1 Pro/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/CP-01/CR-20/CR-10 SE

Prints stick perfect.

Pretty awesome you can print on both sides… haven’t had to switch to the other side yet but happy to have the option to do so. Great price for the value!!!

It's a great PEI sheet. I love textured surfaces, and filament sticks to it if leveled correctly. Just don't do what I did. I was used to cleaning by glass bed with acetone when out of IPA and forgot about the PEI sheet and completely ruined the textured surface. Going to purchase a replacement soon.Note: If purchasing for an Artillery Sidewinder X1 make sure to place the part with the tabs on either side of the PEI sheet facing the end of the printer. When beginning the print, the nozzle drops a few millimeters in front of the heat bed. If the PEI sheet is placed towards the front, the nozzle can push down on the PEI sheet. It happened to me a few times, but nothing happened. It's better to be safe than sorry, and place the PEI the other way.

Not knowing how to remove the print from the original build plate lead to a tear in the top layer. Bought this as a replacement and waited for the part to cool down per instructions and this worked great. However, this didn't last long as the top layer still would loosen and eventually tore a hole. Saw a glass plate at Microcenter on sale, bought that and I'm using that now. If you do a lot of prints, you might consider changing to glass.

The frosted side of this bed works great, a little bit of glue helps the filament stick perfectly. However the pattern side, no matter how much glue is placed or how hot my bed is, it ends up lifting from the bed and warping the print.

For whatever reason, I cannot get prints to unstick from this board. I printed something i have printed countless times over and over again. On this particular print plate, the prints will not release. Same settings as every other print but something is wrong with the plate i purchased. Its almost as if the surface material is melting and binding with the pla.

This is exactly the same as the original (magnetic) build plate for the Ender-3 S1 Plus! I love magnetic build plates -- no clips and the surface of this plate just needs a little alcohol wipe in-between printes! Also, I didn't realize that one of the qualities that made the original build plate SO EASY to use were the notches until I bought another replacement build plate that didn't have the notches.Update 5/4/23:I messed up the original build plate (BP, that came with the printer) when I set the nozzle (print head) too close to the BP. When I did that, the filament was so deeply embedded into the BP that when I removed the filament, part of the BP surface was removed, too! When I moved the nozzle up, the filament layed on the BP as it's designed to do. After that, all my prints came off easily once cooled or with a little squirt of alcohol!I cannot blame the filament embedding itself into the surface of the build plate when it was my fault for poor nozzle placement!

my kid love to use this on his reality 3 d printer

Returned, first time using painted surface came away with print.

Fit well, good flexibility.

Pei coating peeled off in areas when removing print

but it very good overall

Fits just like the original !!