Hybrid Solutions Graphene Acrylic Black Trim Restorer, Revives Exterior Car Plastic to Like New Condition, Won't Wash Off, Superior UV Protection, 10 fl oz

Ok first thing to know about this product is that it works, very well. Second thing is that this is NOT a product you just slop on like tire dressing. You need to be precise and follow the instructions carefully. It does have a black tint to it so wear gloves unless you like that look. I did get it on the paint a bit and after it dried it came right off. I used on of the yellow and black tire dressing applicators that they sell on Amazon for nearly nothing and it worked great. It worked great because those have a very defined, thin edge along both ends. I also applied it when it was cool and not in direct sunlight. I applied it to an old faded JD lawn mower to see how it worked before trying it on one of my cars. The steering wheel was especially faded and look bad. Results were great. After two thin coats the steering wheel looks almost good as new and is in no way sticky. The black plastic on the rest of the mower looks fantastic, with what I would call a high satin finish. So basically natural looking for black plastic. I cannot speak to longevity yet but it lasts as long as the old version (which was a very long time) I will be ecstatic. All in all a great product that is less fiddly than the old turtle wax version, does exactly what is says, VERY well. Just follow the instructions, wear gloves and do not put it on too thick.

I absolutely cannot say enough about Turtle Wax ceramic wax. If you search on youtube for that product you will find some objective tests that will show beyond a doubt that the ceramic spray wax is amzing. So, when I saw this product I had to give it a try. I have an FJ Cruiser with a lot of black plastic. I have used other products and they are good but only last a month or so. I bought this and applied it as directed and honestly it lasted over one year in the worst winter conditions. Pretty much the same results as the ceramic spray wax. One bottle was more than enough to do my FJ as well as a friend's jeep. The only mistake I made was not taping off the paitned areas and not wearing gloves. The prodcut comes off the painted areas (if they are waxed!) with some effort. The hands - another story - lots of goop and pumice. IT was like a ceramic shell of black encasing my hands! The trim restorer is AMAZING - would recommend to anyone who has a lot of black trim to keep protected.

If you are looking for a quick wipe and walk away product, this is not it. If you are looking for a long lasting protectant that is going to make your trim look better than new, have the patience and willingness to go the extra mile in application, this is an outstanding product. I would rate it a 5 if only basing it on the end result of a patient application. I downgraded it to a 4 based upon what really needs to happen with the application. First off, clean and prep the trim. After a normal car wash, I went over all of my trim with a foaming tire cleaner (Hyper Foam Wheel Cleaner & Tire Prep) and a tire scrub brush. This was rinsed and followed by wiping the trim down with a Panel Prep (IPA type) spray. Once the panel prep had evaporated, the trim was ready for the application of the product. WEAR GLOVES. This is not a clear liquid, it's more of a creamy dye that will stain whatever it touches, hands, clothing, etc... Using a foam applicator or foam paint brush (I used both, the brush for tight areas where I needed more control). Apply a layer of the product... and yes, one layer may look streaky but don't sweat it. Use a circular motion with your foam applicator whenever possible. Apply to a section of the trim then immediately level with a microfiber cloth. Continue the first pass over all trim on the car using this process. All told, it took three total passes of all trim using this process to get uniform solid coverage but man, it looks great when finished. Better than new. It's been on my Jeep for two months thus far and, with routine maintenance washes, it looks like I applied it yesterday.

Works fantastic. But MUST wear gloves when using because it is a dark stain. Easy to apply. Wipes off of car body paintwork, but use clean cloth. Seems to soak into plastic a bit, which may let it last. Color matches my JK hard top. I had one essentially grey fender, now they all look new. Front bumper as well.

Independent testing proves this wax performs extremely well under various conditions. I've had no issues, works great.

What a surprise to find a very watery and messy liquid in this bottle. It was very difficult to apply because it kept dripping all over the place. They recommend wearing gloves, but don't supply any. I don't keep plastic gloves on hand. I had to use plastic bags on my hand. If some accidentally gets on the paint of the car, it will not wipe off. It smears. I did the applications as directed on the bottle and did two applications as recommended but it has a very streaky look. I accidentally got some on my arm and it left a rash. I would not recommend this watery product. The car looks better but not very good.

Every trim restorer I’ve tried so far has had one or more drawbacks. This product is no exception. It looks good when applied, however you have to be incredibly careful not to get it on your painted surfaces because it’s nearly impossible to remove. Directions suggest masking. This is way too much work for a product that fades after two car washes. I’ll be continuing my search..

This product is amazing! It goes on smoothly, gives a deep, glossy black shine, and seems to last longer than other waxes I’ve used. My car looks freshly detailed every time. Super easy to apply and wipe off definitely worth it!