🔨 Elevate Your Craftsmanship with ZeroPlay Precision!
The Microjig ZP750-B2S2 Zeroplay Miter Bar 2-Pack is designed for both amateur and professional woodworkers, offering a no-slop solution for building table saw sleds. With easy top-down installation and compatibility with standard T miter slots, this upgraded best-seller includes all necessary components for precise calibration and adjustment.
| Manufacturer | Microjig |
| Part Number | ZP750-B2S2 |
| Product Dimensions | 27.94 x 11.18 x 3.81 cm; 240 g |
| Item model number | ZP750-B2S2 |
| Size | 9.5" x 0.3125" x 0.78" |
| Colour | Green |
| Style | Miter Bar |
| Material | Plastic |
| Shape | Elongated |
| Power Source | Hand Powered |
| Item Package Quantity | 1 |
| Usage | Amateur, Professional |
| Included Components | (2) ZeroPlay Miter Stops, (6) 8-32 x 1/2" Pan Head Machine Screws, (2) 5/16 OD O-Rings, (2) 1/4" x 1/2" Stainless Flat Washer, (1) 3/32 Hex Wrench, (6) #8-32 x 3/16" Button Head Screws, (2) 1/4-20 1 3/4" Carriage Bolt, (2) ZeroPlay Miter Bars, (2) 1/4-20 Thumb Knob, (6) #10 Flat Washers, (2) Nylon 1/4-20 x 1/4" Set Screw |
| Batteries included? | No |
| Batteries Required? | No |
| Item Weight | 240 g |
M**E
Another excellent product from Microjig
Another excellent product from Microjig
J**R
Excellent design
I am very happy with the ability to adjust these from above my crosscut sled, rather than having to remove the sled, make adjustments and then try again again. The adjustment is very sensitive though, and you have to be very careful that you don’t let it slip and jam before you tighten down the set screws.
P**R
Accurate and easy to adjust.
This is an excellent product which makes the building of jigs easy and very accurate.
K**H
Simple, easy to use product
I feel this is a real bargain! Yes you can make a set of these yourself but, at least to me, it is so much simpler. It also easily transfers between jigs.Well worth the price!
L**
Good product
Take bit time to make is work but once it’s working it keeps going
M**N
Too Short
I purchased these for the large sled to offer plans for...however, unless you have an extension on your table and you follow the plans, you will get a slight wiggle right about when the cut is completed at the fence line, keep in mind it is a heavy sled. I made the jig primarily for box joints, and that slight wiggle will affect the joint for sure.If I would have known this, I would have adjusted the guide a few inches to the back side of the jig and it probably would have solved the issue. I will know have to plug the holes and reinstall it.They should consider making two size options, a 19" +- rail would be perfect for the sled size they advertise. Other than that, they seem like they are well designed and easy to install, direction where easy to follow...but what the video first...
Trustpilot
1 week ago
2 months ago
