1x Maru Lube 10 Ml Silicone Oil for Puzzle Cube 3x3x3 4x4x4 5x5x5 6x6x6 7x7x7

I always make sure I have a supply of this particular speedcube lube before I buy any new cubes, it makes a HUGE difference. I have now got over 20 cubes, they all feel awesome with this lube. I have also bought a few 'cheap' cubes recently.. I just wish i had before and after videos of the huge difference this lube makes. As i have said in my other reviews, I am not a sponser, just a lover of this lube. I am also embarrased to say I haven't tried any others.. so please make up your own minds, this is just my personal review. I have a few GAN cubes but every time I try and buy their own special lube it's out of stock, I will keep trying and then I can add some more balanced reviews

I've heard a lot about Maru lube and I decided to give it a try. First off, 2 drops in either side of my YuXin Little Magic has made it glide absolutely perfectly. It's been a week and the cube still feels really good to handle.When adding lube to the pieces, add one or two drops on either side in the cracks of the cube and work it around so that you know you have some even coverage, then let the lube sit. Do not start doing solves straight off the bat, the lube will gum up and become difficult to work with.Also this is, from my experience, not a good core lube. I got a little overexcited so I put a drop on the inside of the core piece where the spring sits and a drop on the screw which comes into contact with the spring too. This was a mistake. When I noticed the squeaking of the spring, I knew I had gone wrong.Took the cube apart and had to spend 20 minutes un-gumming the threads of the screw where the lube had leaked into the hole and also there was minor corrosion on the screws. Not 100% if this was the lube or not, but this is a correlating factor.Basically, get a different lube for the core. Differential Oil I hear is pretty good if you can find it in 50,000 WT. Maru lube is great as a piece lube.

I would recomend this lube if you have a silicone based lube. Now I don't know what the instructions say (there in chinese) but I think this is the best way:1. DROP In some middle thick silicone based lube2. Break in for a few minutes3. Disassemble the cube (pray to God if it's a 4x4 or a 6x6)4. Put some on 3 edges on each layer5. Reassemble.6. Break inI would get this with some silicone based lube as it's very fast.

Keen cuber here. This is a good lube - makes turning quicker, smoother and quieter. First time i put around 6 drops in the cube - pulling the corners apart and putting a drop into the center from various directions. Then use a few times to let the lube work around. Future uses i just added one or two drops every few weeks. This pot is small but lasts a really long time as it is literally one drop at a time.

I use this on my 3x3 cubes, and it makes them very fast and smooth, with very little resistance to turning.

I found this lube of britcubes for £2.99. However, I do believe this is the best, or one of the best lubes I've used.

I can really feel the difference. Works like it should.

Good value for money