Kraftex Copper Tape [1/4 Inch x 108ft] Copper Foil Tape for Guitar Cavity, Electrical Conductive for Soldering, Stained Glass, and More (1/4 Inch)

As a hobby I build scenic slot car layouts, I used to use preformed plastic track such as Scalextric or Carrera.For the last year or so I've been routing the slot that guides the car and this double sided self adhesive copper tape is brilliant!It's so easy to apply and has excellent conductivity, best of all it is very reasonably priced and very durable.

Find this copper foil easy to use and good value for money. I've ordered frequent times now. Adheres well to the glass and if I've made a mistake quite hard to get off so you know full well it does its job correctly.

So easy to use and stuck really well

Great product, I’m using it to teach the kids how to make electric circuits.One problem, because the tape comes on a roll with backing paper that you peel off, it tends to unroll itself. (Unlike cello tape where the roll of tape is stuck to itself).The trick is to make a tape dispenser by placing the roll inside an old DVD case. The tape should come out at the spine of the case easily.

It came fast ,just like on picture. Good.

It is a great alternative for leading your windows other than the more expensive lead. It looks very decorative and amazing. It looks like gold lead except it isn't and it is much easier to work with. You can just tear it with your hands and it stays stuck to the windows. Very pleased with this stuff. My windows look very posh.

I used these with a Key Stage 2 class to build games controllers out of cardboard and connected them to a computer using a Makey Makey device. The tape sticks well and conducts reliably. Occasionally needed to be reinforced with two layers where the tape joined to ensure a reliable connection.The copper tape provided a really cost-effective way of allowing the children to design and build their own control devices for computing.

The media could not be loaded. If you're buying this primarily for the slug repelling attributes of copper to take care of your garden then keep looking. I've attached a video to show how little this material bothers even small slugs.It sticks well enough, but considering I didn't buy this for aesthetic reasons I'm unhappy at the results.

Parfait pour vitrail Tiffany

Very good stuff, its adhere very well, I use it on many application for my 18650 battery DIY project.So far I'm pushing 9 amps on this foil tape 1 layer high and 3 wide and it work just fine small heat but just as expected for the current draw. This is a nice alternative to soldering wires. In some instance I also solder some terminal on the end of the foil and it create perfect joint.

Ho usato questi nastri di rame per comporre una vetrata con tecnica tiffany . Aderisce bene al vetro e si può saldare a stagno facilmente . Avrei apprezzato avere la parte adesiva di color nero da usare con vetri trasparenti .

Habe damit eine Uhr repariert. An einer temperaturempfindlichen Stelle konnte ich nicht löten und Silberleitlack klebt ja kaum. Also habe ich dieses Band ausprobiert und bin angenehm überrascht.Ich habe versucht, den Widerstand der Klebefläche mit einem Multimeter auszumessen, aber das ist natürlich schwierig, weil es auf den Anpressdruck der Messspitzen ankommt und natürlich auch darauf, wie groß die Messspitzen sind -- bei einer breiten Messfläche ist der Widerstand logischerweise geringer als bei einer spitzen Messnadel. Naja, also wenn ich die Messkabel beide auf der Klebeseite anbringe (d.h. der Widerstand fällt zweimal an, wenn wir mal für das Kupfer näherungsweise 0 Ω/mm annehmen) und beide eine Auflagefläche von (sehr! sehr grob) geschätzt 1mmx3mm haben, dann schwankt das Messinstrument wild zwischen 0,2Ω und 0,6Ω. Aber wie gesagt, verlasst Euch bitte nicht auf diesen Wert: Ich konnte die Auflagefläche nicht messen und das Multimeter hat ständig schwankende Werte angezeigt. Wer einen geringeren Widerstand braucht, sollte halt die Kontaktfläche möglichst groß wählen. Und es sollte jedem klar sein, dass man lieber Lötzinn oder gleich Silberleitlack nimmt, wenn man einen wirklich geringen Widerstand benötigt. Zur Reparatur eines Anlasserkabels taugt das Zeug natürlich nichts! ;-)Der Kleber klebt einigermaßen, vielleicht nicht ganz so gut wie handelsüblicher Tesa, aber brauchbar.Ich bin von dem Produkt begeistert.

Great tape. Sticks and holds great perfect width for my crafting.