2000G ABS Like Resin for 3D Printer, 405nm UV Curing Photopolymer Rapid 3D Resin for 2K 4K 6K 8K LCD/DLP/SLA 3D Printers, Non-Brittle & High Precision & Low Shrinkage, 2KG, Dark Grey

I’m new to 3d printing, I have a Saturn 8k printer which has the build plate capacity for some larger scale table top miniature creatures and terrain. After a week of delight printing 28mm minis with standard resin I was eager to try printing some gloriously colossal dragons. I chose some models that were probably not the best for beginners, having lots of delicate features, very long and thin antennas, horns, whiskers, stuff like that. I was clumsily breaking all these details in post print clean up and assembly. Among other learning, I thought to try a more durable resin to see if I could be more successful. I had ordered a translucent standard resin marketed on Amazon under the name Jayo that I was pleased with, I had noticed on the resin bottle label it was licensed under Sunlu, what precisely that means, I can’t be certain, but I suspected it was simply that Jayo produces and sells resins based on Sunlu formulas. Having experienced good results with that product, when I saw the Sunlu ABS-like resin offered at such a low price for the 2000 ml size package, I felt it was worth giving it a try. I had never used another abs-like resin before so I can’t say it is or is not as good as the other brand that may cost 2 to 3x as much, but what I can tell you is that I am pleased with how this abs-like resin is performing in my application. It is a thicker viscosity than standard resin and following the results of two benchmark prints, I had to adjust my exposure time up 0.5 seconds, but that was all it took to start printing successful large scale models with details that can stand up to my fumbling! The new prints had much greater flex and durability, I dropped a 12 hour print on the hardwood floor after taking it out of the UV curing box and it survived without loosing horn or claw! The resin comes very well packaged, the jug is sealed in a bag, inside a fitted air bubble sleeve inside a cardboard box. The 2 liter jug is an elongate shape that is easy to hold while pouring and is stable when returning resin through a funnel. The resin came with some funnel filters also, a nice surprise. The Sunlu ABS-like resin seems more consistent from the bottle, like it stays well blended better, than the standard resin I have used. Even when I add more of this resin to a vat I have printed from a couple times, when I mix it with the silicone spatula it seems to combine more readily, at least from the visual perspective. I see the same fine details in my prints, it washes just as easily and does not have any more odor than the standard resin I have been using but it is noticeably more durable…and yet somehow actually costs less. I haven’t found anything to dislike about this resin and at the cost, I can’t see a reason not to use it for all my minis and enjoy a little extra klutz insurance. Maybe other ABS resins are better- I would not know, but for a hobby printer creating miniatures, this resin meets all my needs and expectations while the lower cost allows me to print more stuff than I could possibly paint in a lifetime. Try it, you’ll like it!

The prints come out durable with a professional smooth finish and sharp edges. Pouring, curing, and cleanup were easy with minimal odor. It performs exactly as described for ABS-like strength. Excellent resin for functional parts and prototypes.

By far the best resin I've used. Noticeably better results on my printer than the standard abs like from sunlu and much more sturdy.

TLDR: this is a fantastic abs-like resin, without even taking the incredible price point into consideration. It is my new go-to miniature printing resin. Some background: I almost exclusively 3D print miniatures for D&D, and have experienced all the frustration of incredibly brittle minis that practically explode if dropped during gameplay. I experimented with mixing standard resins (Anycubic and Elegoo) with flexible ones like Siraya Technical and was pleased with the results but struggled with the high price point of the flexible resins, even when blending it with normal resins. Per the advice of several YouTube videos, I decided to try abs-like resins. The Review: so far, I am incredibly pleased with the results. I was so excited to try it, I went ahead and ran a set of prints with my usual blended resin settings (not far off from the Anycubic default settings) with no modifications. Based on the results and a quick RERF I think this resin actually would do fine or better with slightly shorter cure times. Overall, the detail is still the outstanding quality I’ve come to expect from my 3D prints. Support removal was marginally more difficult, and there was more support scarring than usual on larger prints, nothing that can’t be sanded out though. And that issue might be fixed with shorter cure times. I haven’t done any drop testing but the parts feel very sturdy while still maintaining good flex at the thin points - I easily bent the trident of a mini 45 degrees without it coming close to breaking or permanently warping out of shape (see last photo). There are YouTube videos out there though with drop tests with abs-like resins and they tend to outperform everything by a significant margin. Finally, frankly, the quality for price on this resin can’t be beat. I’ve see sales where you can get 2kg for $40, which is less than most standard resins. Once I finish off the rest of my resin collection, I won’t be printing with anything else.

Very easy to print with and is very durable, but DANG! It is STINKY. This resin off gasses super badly, so make sure you have a good fume extractor. Luckily, I have a really good setup with a powerful fume extraction chamber. So be aware that the fumes from this are kind of intense compared to other resins. Had to knock a star off because of the smell.

My go to resin! I print lots of minis for wargames and D&D. This resin works very well and you still get solid detail. I'm printing with a Saturn 4k ultra. It smells kinda bad. Not the worst, not the best. 3/5 on odor level. Color is a nice mid toned gray. Comes out a touch thick so make sure you have a heater or at least room temp for good result!

I decided to try this ABS-Like resin based on some video recommendations and reviews since I was looking for an inexpensive option for printing tabletop miniatures. I’m extremely happy with the results. It’s not brittle like standard resins can be. It prints beautifully and dialing in the correct profile was very easy. I have printed dozens of miniatures with it and I’ve had zero issues with adhesion. It’s not super thick and I get fantastic detail consistently. Once my settings were dialed in, the only failures I’ve had have been due to my inexperience with supports. It’s not as durable as more expensive ones but it’s definitely worth the price. Very happy and definitely recommend it.

This is my go to resin. Great prints with a lot less smell. I highly recommend this one.

Resina ottima, stampa eccezionale

Ottima resina super resistente usata con anycubic photon mono 7 basso odore e risultati perfetti come testimoniano le foto ricomprerò sicuramente

Best resin i have used so far for table to minis! the odor is very mild i barely even notice the smell. very easy to clean up prints and resin vat after/between printing, details come out great and the strength / impact resistance even on the smallest models i have printed so far is far better than i expected after my experience with another brand/type of water washable resin for around the same price at time of purchase.

サポートは非常に取れやすく、痕も残らない 素材がしなるため細かいパーツも割れにくい 水洗い後はべた付きもなく 匂いもほとんどしない そして、細部まで再現されているなど 今のとこは固定で使用できるものです 希望は色のレパートリーを増やしてほしい！

I’ve tried many resin including Siraya tech which everyone raves about. But once you get the settings correct, ( I’d advise downloading the cones of configuration, helped me so much.) this sunlu 14k resin is hands down the best resin I’ve ever used. Better than elegoo 8k. I used it to make 32mm table top miniatures and every detail comes through you can even see warts on a goblins nose , teeth on chainsaws and individual fletching on arrows. Amazing. If I could give it more than 5 stars I would.