Portable AC Window Vent Kit - Complete Air Conditioner Window Kit, Adjustable PVC Window Seal Kit Panels Up to 60 Inches, for Universal Thread AC Exhaust Hose of 5.1" and 5.9" Diameter

The EACENT Portable AC Window Vent Kit is a fantastic solution for setting up a portable air conditioner. The adjustable PVC panels fit perfectly into my window, and the installation was quick and straightforward. The kit feels sturdy and well-made, ensuring a secure fit without any air leaks. It’s compatible with a variety of AC units, making it a versatile choice. Overall, it’s a great product that simplifies portable AC setup and improves efficiency. Highly recommended!

I couldn’t be happier with this air conditioner! It’s a total game-changer, especially during those scorching summer days. The cooling power is phenomenal—my entire room reaches the perfect temperature in no time, and it stays consistently cool. I love how quiet it runs, too—I can relax or sleep without any annoying hum. Installation was straightforward, and the remote control is super convenient for adjusting settings from across the room. Overall, this AC unit has exceeded all my expectations. Highly recommend!

I can only use my portable A/C unit (Midea MPF14CR81-E / 14K BTU / 8400 BTU SACC ) with my sliding glass door. This kit did NOT accommodate 6" exhaust hose my unit came with but luckily my unit came with a smaller window kit. The pieces were interchangeable so I was able to substitute the panel with the opening that came with my unit. I had to drill a hole in it to fit the screws in but it worked out fine. The hardest part is getting trying to eliminate the gaps between the door frame and the door / door panels. My door doesn't hang perfectly straight and with so many panels there it doesn't really stay flat. I used a ton of foam tape and even that didn't work. I ended up using some of that clear silicone tape (that is used to hang pictures on walls with out adhesive or nails) to seal the gaps between the panels and the door and the panels and the jam. Seals strong and worked well. Putting the panels together wasn't too hard, just getting it installed took some time due to the gaps. Overall, it was worth the money to be able to run my A/C efficiently. The pieces are very sturdy and not flimsy. I am leaving it attached to my door and unsealing the jam part so I can open the door and go on my deck when necessary. The silicone tape is a little tricky to work but you can use hair dryer or heat tool to make it more pliable.

I found a really good way to make the unit fit well into a sliding door slot. I put all the pieces together except the top one and put the unit in place in the door. Then I added the final top piece so it would fit well up and down. As for sideways, to fill in the spaces where the air comes thru, I bought some foam pipe wrap...comes in 6 or 7 foot lengths with a slit in the side to put a pipe in. Instead, wrap the slit end around the outer edge of the unit and then close the door. The foam will pretty much fill in any air gaps from top to bottom. Close the sliding door and to keep enough pressure on the foam to keep the seal, use a couple of those pressure bar closures to squeeze the door tight. It works great. If there are just a few open areas, use a little tape but you won't need much.

This kit works okay, it fit with my AC unit just fine and fit the window. The quality is very good, it is very thick plastic and seems to hold up with no issues. I wish it was a little wider because it tends to fall over unless I prop it up or tape it.

We’ve had eight portable air conditioners. So, we are very familiar with the installation process. This time we wanted to use our sliding glass door instead of a window in the living room. This works for us with no problem. However, you can only have the air duct exit at the bottom of the door/adapter. Another words, you cannot have the air duct exit at the same level as the air conditioner hose. It would be more efficient if the vent did not have to go down to reach the exit hole at the bottom. The design and quality are much better than any we’ve ever had that were provided with the unit at the time of purchase, including the very expensive units. They only provide one extra bolt and wingnut, and that was barely enough because one of them was defective and another one was less than perfect but we were able to use it. The other thing you should consider is once you install. The stick on insulation strips, you would have to cut them to take it apart so it would be better to leave it put together when you’re not using it. Also sliding apart. The individual pieces was very difficult. Even my husband had a really hard time. Nonetheless, I would highly recommend the adapter kit and I think it’s a very good and fair price.

NOT FOR SLIDING DOORS! I bought this because it advertises being made for sliding glass doors but it most certainly is not. After hours of trying to get it to fit nothing about it fit in the sliding glass door. The picture you see is the best I could get it in there. There is nothing special about my sliding door. It’s pretty basic. The bottom doesn’t fit and neither does the sides as you can see. Piece of junk and the company falsely advertises. Requested a refund.

Super easy to set up. Everything you need is in the kit. I had to modify it a bit to fit my window tracks, but thats expected if you want a perfect fit. Otherwise it will work as is. Great value, fit, and quality. I was quite surprised how sturdy and hwavy thw plastic was, which I was nervous for security reasons, but it is sturdy!