SABLUE Super-Thin Open End Wrench Set, Metric 13-Piece, 7mm to 24mm, Ultra-Slim Design, Double Ended Cone Wrench Spanner Tool Kit (A01)

Small and thin. They are cheaply made but they are cheaply priced. They worked perfectly for what I needed.

Sorry but these tools are flimsy and not hardened steel. They bent upon use and the wrench's nut size deformed to not function as needed. I do not recommend these.

I tried to use these wrenches on a friends older bike. The cone and the lock nut were pretty tight, so when I tried to use these wrenches, the opening of the wrench just bent and wouldn't hold the nut. I had to use a pair of pliers to hold the outside of the wrench tight against the nut to be able to use it. I'll be throwing these away and buying a set that are actually made of hardened steel. Not worth the $11.

Man, these are great when you need to get into tight spaces and your regular tools don’t do the job. Quality is not the greatest. But I bought for occasional use where I can’t get a regular wrench between the threaded rods and caster wheels they sit on.

Better than expected!! I am using for emergency backpack tools for my KTM dirt bike. Was looking for lightweight as main characteristic. I originally was looking online for a single wrench (10mm x 13mm), but could only find heavy steel with those sizes. To my surprise the set had a (10mm x 13mm) wrench, however they were so light (but still strong) I took the (8mm x 10mm) for my backpack as well. I thought was getting just the standard combos, but there are several (so many) combos - I was able to remove 2 wrenches from the set to be placed in my backpack, and still maintain every size in the set, which are going into center console of truck! Obviously, they are not Snap-On, but perfect strength and thickness for my needs. Perfect for glove box or console tools, I’m ordering more sets (SAE & Metric) for my car.

Purchased for what I though could be used on both bikes and automobiles. Not good quality. If used under large pressure wrench will bend. Don’t recommend for automobiles as sizing isn’t accurate. Not true 8mm thru 24mm. Works great for there intended use.

If you're trying to use these for cars. . . Good luck. They are way too flimsy for that. I needed it as a suppressor wrench. Works fantastic for my purpose

You get what you pay for. Stamping is terrible. Tolerances are iffy. Missing some sizes and multiples of others. Had to thin out the 12mm to get it inside the washer and onto the bearing cone I needed to work on. But hey the job got done and it’s sure cheaper than taking the wheel into the local bike shop to service the bearings. If you actually need a tool you will use more than once a year look elsewhere.