Dynofit 6x5.5 Wheel Spacers 1.5", Heavy Duty 6x139.7 Forged Hub-Centric Spacers Compatible with 2019-2025 Ram 1500, 77.8mm Bore with M14x1.5 Studs – 4Piece Set

These are some solid, well made items. Only took about an hour and a half to install properly. Seriously, if you don't know how to use a torque wrench and grinder, you have no business installing these. The instructions are not all that great.I purchased these to use on my 2020 Ram 1500 Big Horn to get more clearance from the control arms so I could use tire chains on the front end.Here is what I used -1/2" Torque Wrench capable of at least 140 ft.-lbs.1/2" Breaker BarAngle Grinder7/8" and 19mm socketsLoctite thread locker - BLUE 242 (for the love of God, DO NOT use RED. Your mechanic will be pissed)3 ton rolling floor jackI put the truck in 4wd Low. This held the front wheels in place to install the spacer.Jack up a corner of the vehicle until the tire is about 2 inches above the ground.Remove the wheelTest fit the spacer to see how much of the wheel stud needs to be ground down (for me it was about 1/4")Grind down the wheel studs until they no longer protrude beyond the spacer. VERY IMPORTANT!Apply a thin line of BLUE loctite along the top of the wheel stud. ALSO VERY IMPORTANT!Install the spacer with the provided lug nuts using the 19mm socket.Torque the lug nuts to manufacturer specification. (I personally torqued everything to 130 ft.-lbs.)Install the wheel on the spacer with the original lug nuts.Torque the lug nuts to manufacturer specification.Rinse and repeat for the other three wheels.I let my vehicle sit overnight to be sure the BLUE thread locker has set up.Take a little drive in the morning for 8 to 10 miles. Re-torque the wheel lug nuts.Take another cruise for 60-100 miles. Re-torque the wheel lug nuts.Keep in mind that the wheel studs on the spacer are brand new. They will stretch!The instructions stated to check torque on the spacer again at 1,200 miles. I'll do that as well.Hope this helps somebody!

Quedaron bien instaladas, calzan perfecto.

Perfect fit for 2014 Ram 1500 4X4

RAM 1500 2016

Product was delivered on time and packaged well. I've had them installed for a year now with no problems at all.

Quality part,ease of install ,gave my truck a slightly wider stance with a 1.5 spacer flush with outter fenders .

I put these on my stock wheels for a 2015 ram big horn.

The nuts are made cheaply they feel like tin. The stripped on the inside and outside