7.5Amp 4-1/2 Inch 12000 RPM Angle Grinder with 2 Guards, 3 Cutting Wheels, 3 Discs, Non-Slip Handle and Carbon Brush for Metal and Wood

My husband needed an affordable replacement angle grinder for work since all of his tools got stolen on a job site~ this was the least expensive model I could find~ and so far so good. It cuts and grinds through sheet-metal with no issues at all. He’s been using it every day now for about 3 months. Nothing but a positive experience. The handle is nicely coated; making it comfortable to use and does a really good job at protecting from vibration. It’s got a solid build construction and an extra handle included in the box; this helps keep the machine stable while in use. It came in a heavy duty toolbox sort of case which was A pleasant surprise~ With extra space in there to keep other tools easily accessible~ Like A tape measure and a few screwdrivers fit easily. Also durable enough to keep the machine safe while in rugged work conditions. The Battery life is perfect for his needs~ he gets about 30 minutes of use on one charge and it only takes another 30 minutes to fully recharge it again~ He was able to pick up another battery online at a low price just to have in case of an emergency. Also nicely equipped with safety locks. The machine is quite compact considering how powerful it is~ Overall, I am extremely pleased with this grinder for $100 it was an amazing value and I look forward to trying other tools from this brand in the future.

Tons of power, easy to control, great price, what's not to like? I just used this baby to polish up a slab of granite, and it worked great. I noted that the handle tends to loosen a bit under the vibration of long usage, and the motor can get quite hot when buffing for an hour or so, but I don't think that is unusual for an angle grinder. For under $40, this is an incredible product! The only wish I had would be a variable speed setting, this has two modes: "off" and "spinning like a Tasmanian Devil from one of those old Bugs Bunny films"

This SHALL 7.5 Amp grinder is a fantastic addition to any workshop or home garage. It delivers powerful, consistent performance with a variable-speed motor that ranges from 3,000 to 12,000 RPM—perfect for cutting, grinding, or polishing metal, wood, or even masonry. I appreciated the lightweight, ergonomic design—just 4 lbs with a rubberized grip that’s comfortable to hold even during extended use. The tool-free guard adjustment and lock-on switch make it easy to operate and switch tasks on the fly.

I purchased this tool solely because it is a variable speed grinder. I do car restoration and don't always need 13,500 rpms to do light grinding. I bought this not expecting much, but it is a really good value. Powerful, and vary complete kit with all you need to get busy. It is powerful, high quality (probably not for professional use) but just right for the hobbyist like me. The price is also very attractive as I like to have an assortment of tool to use. Only minor downside if it even is one is it is a bit louder than my grinder but it is a grinder after all, and I have ear plugs if needed.

This grinder is as good as the blades that you put on it. It handled my job (with the correct blades) equally as amazing as something three times the price. Remember to do your research on the blades and I would recommend the diablo company. With the correct size and wheels for your application it makes cutting, grinding and shaping seem like you’re going through better. I don’t benefit from speaking about the blade company, but I want everybody out there to know a good product when I’ve experienced one. My skill saw, hacksaw and grinder all have those blades and when I get my chopsaw and tablesaw, I will equally use those blades as well. They cannot compare to any other blade because they’re in a class by themselves. Once again, the grinder is as good as the blades and requires minimal effort on the grinder to avoid it burning out. Sometimes the accessories for the tool make the job and not just necessarily the tool itself.

Pros: 1. Awesome bargain for a variable-speed grinder with plenty of power, especially with all the accessories that are included. 2. Both types of adjustable, quick-clamp guards included to meet current safety regs. 3. Good quality lockable trigger switch. 4. Rubbery secondary grip, mountable on either side. Better quality than garden-variety plastic ones. 5. No spindle play, nice 'n tight. 6. Minor play in gear mesh, not enough to matter to most users. 7. Fairly heavy, feels substantial, gives impression of quality. 8. Plenty of wheels included for various tasks. 9. Replacement brushes included. 10. Everything fits perfectly (arbor adapter, 5/8"-11 threads, wrench, etc.). Cons: 1. No solid grinding wheel included. See my recommendations for these below. 2. No storage case included, unless you count the flimsy cardboard box that everything is tossed into (no separate compartments). Given the many pieces in this kit and considering one must purchase a grinding wheel to make the kit complete, I would have gladly paid a few extra bucks for a proper blow mold case to hold and organize everything. Shall did include a sticker for one's toolbox (or whatever). Update 3-25-23: I purchased the $12.88 (at time of writing) Hyper Tough (Walmart house brand) 19" toolbox for this grinder kit. The box accommodates everything that came with the grinder, plus the solid grinding wheels I purchased (spec'd below) and even the Pomsare sanding kit (model PW820813; ASIN B09WYZMX2Q) that I purchased with this grinder. 3. Vibration. It's not too bad at this price point, so this is a minor con. I scoured the interwebz for a corded, relatively powerful, variable speed angle grinder that wouldn't break the bank, and after doing much research into specs, I pulled the purchase trigger on this one. This variable-speed version is just $15 more than their constant-speed version. Included in this kit are 2 felt flap discs, which are are a little over $3 each (model SH122002AE; ASIN number B0B398XBYD), so that's about $6 worth. You're paying just $9 more for an ergonomically superior handle with superior trigger type switch and variable speed. Having variable speed greatly enhances utility of a grinder, as it can be used with various low speed accessories, such as sanding pads, foam polishing pads, shaping wheels, etc. The low cost of upgrading to this version is a no-brainer, so in my cart it went! The clamp guards are nicely done. The clamping force is adjustable via hex nut, and they can be positioned at any angle within the clamp lever's limits of movement (i.e., until it hits the grinder's head). The trigger switch is firm, smooth and solid, with a tactile On/Off snap. There is ≈ 10mm (0.4") travel before positive engagement, so it's not easy to accidentally turn this grinder on. I'm actually surprised at how good quality this switch feels at this price point. The trigger lock works well, easy to engage and release. The plastic secondary/auxiliary grip that can be mounted on either side is reasonably thick walled, has a length and diameter that most users should find suitable, and its rubber coating helps maintain grip and somewhat mitigates vibration transference to hands (as do thick gloves). It's the perfect size grip for my ≈ 100mm (4") wide hand. There is some vibration with this model, but it's not bad, especially considering the price. You'll notice it more with poorly balanced wheels (the heavier the worse, of course), but that applies to any grinder. Spindle play is practically non-existent. There's is some play in the gear mesh, but it's not bad. Looser tolerances at this price point are to be expected, and it certainly isn't a deal-killer with this model. The spindle lock works as it should. There are no issues with it. Don't expect an electric brake at this price. If you need a brake to satisfy regs or just your personal preference, this isn't the grinder for you. Although the manufacturer's product description says "6-speed dial", the speed is continuously variable — any speed can be set between the 6 numbers. I haven't yet checked accuracy of these numbers with an RPM meter. There's a detent only at the #6 setting. Since the control can't go past that point anyway, this detent makes no sense on this tool. It seems that Shall cut costs by using an off-the-shelf thumbwheel control meant for a different device — the detent is probably originally used as an on/off switch then the pot adjusts something. In any case, the speed control is smooth and works perfectly. As with the power switch, the speed control feels like good quality on my unit. I tried an included 60-grit flap disc on a mower blade and it started losing its abrasive quickly. It also rounds off the angle cut due to flap flex, which is of course common among flap discs in general. Flappers aren't the best option for mower blades, so I also added DeWalt grinding wheels to my cart (models DW4523 and DW4514; ASIN numbers B00004RH8I and B00002246K, respectively). I ordered the 2 different types because I wanted to see how each worked with this grinder — they do very well — and I wanted to make sure the 5/8"-11 spindle threads would properly mate with 5/8"-11 accessories from other brands like DeWalt (they do). The DeWalt wheels removed the mower blade metal quickly and their edges still look new after sharpening a rather dull blade. I used an included cutting wheel on some bolts and it worked well. At 7.5 amps and 12k RPM, this grinder has enough power and speed to satisfy most users, and it's more capable than most grinders in this price range. Build quality is surprisingly good, so if the price is indicative or suggestive of anything, it would be reduced durability and longevity. I can't speak to this grinder's durability, as I haven't dropped it or otherwise abused it, and my use has been limited (one mower blade and a couple bolts), so I can't say how long it will last. I'll update this review if my unit craps out on me prematurely with normal use. Verdict: A complete kit should include at least one solid grinding wheel, preferably 1/4" thick. However, I can't find a Shall brand solid grinding wheel available anywhere, which would explain its absence. It's odd that they offer felt flap discs but not a grinding wheel, considering most people buy grinders for.. grinding. The DeWalt wheels I referenced above are cheap and yet good quality, so despite the lack of grinding wheel, the overall value of this kit earned it the 5th star. P.S. I use a SAS face shield (model 5145; ASIN B000RFSLZ4) while grinding. Review pending on that item. I also typically wear safety glasses under the shield — mine is an old pair, NLA, so I have no model recommendation.

Very nice tool

Fake one day work

I like the lockable trigger. It came with spare brushes. That Handel feels good. I've used it 3 times while welding up a 225 deere excavator bucket along with a 7 inch makita. It vibrates a little mote than the 5 inch bosh and the 5 inch makita that I use to have. The bosh didn't have a lockable trigger and both are more than double the price of this so I decided to try it. I'm happy with it. I like the variable speed dial. It's good to be able to slow it down if your using a larger disc.

Works great. Cord is stiff though.

Comfortable, nice switch that locks. Lightweight Tool. Variable speed works well. Arrived in perfect condition. Im so pleased with the inclusion of several cutting wheels, abrasive wheels and felt polishing wheels. Incredible VALUE here. Powered at 7.5 amps but performs like a grinder with a lower power rating. This isn’t a deal breaker because I own several grinders. I simply need this one for its variable speed option. If you’re depending on a powerful grinder then choose a much higher amperage rated tool. This size motor will bog down under hard use. Good luck to all.