20 Pairs 1.25 mm Pin Micro Electrical Male and Female Connector Plug with 10 cm Wire Cable

Okay, guitar-electronics modifiers: Just TRY these for guitar connections. They are *awesome*. I use a dozen or more pairs of these in a guitar setup sometimes, to keep everything "modular" [want a push-push pot instead of a push-pull? Just plug it in.] and, as a real critic of tone, I notice NO "tone-suck" or "loading." Want to simplify grounding? Solder females to a copper "hitching post" and run male lead-pairs from component or washer/lug-pairs to those. I can drop in a pre-wired phase switch between pickup and selector leads, or swap 4-lead pickups, in seconds. Or, not only drop a whole new tone-control setup between the volume and jack leads in the same short time... you can even try it out outside the body easily before committing to cap/choke combo(s). Running extensions to test new components is trivially simple with these. I'm including video of a guitar at performance volume on a nice tube amp (on just a phone, sorry) using these connectors for every major connection. I buy them by the jar-full. Essential. ==NOTES ON THE VIDEO== I'm the singer, the connectors are in my guitar, which is a pawn-shop-rescue Indonesian-made Samick. The pickups are TFW HB/P90s. (Note: This is a jam, and I'm on the "guest" amp. The other guitarist, Pat McF, the host, is not only a better player, but he has the controls of both amps, and is playing on his own custom, decades-honed, hand-picked, boutique rig, in a setting he's played every week for the past four years, so his sound is brighter, cleaner & overall better. But that same deficit afflicted every "second" player, even on the best custom Teles or whatever. For the setup, the sound is 100% of potential.) And yes, I have a stroke at about the three-minute mark and wander off the rails note-wise... not gonna blame the connectors or take off a star for that lol. Or for the missed notes in the singing. I'll let them off the hook for that. Give these a try in your guitar cavities: they make your life SO much easier. I found I'd mis-wired a rotary blender (in fact, in THIS guitar, on THIS night) so it affected the opposite pickups I wanted it to, and for a "temp" fix I just cross-wired a set of these little connectors (red-to-black on a male & female set, short leads) as a "jumper" and inserted it into the path. Didn't have to take any knobs off, reach in delicately with a hot iron, etc. I'm thrilled with my results with these. [Same thing works great for reversing polarity on pedal power-supplies that take a different center polarity... e.g. many Chinese-made loop pedals.]

These proved to be valuable to connect power to an HO scale model railroad.

Technically there is no such standard as "Micro JST" these are "Molex PicoBlade" 1.25mm pitch 2-pin cables and are compatible.

These connectors saved my sanity more than once when I had a project on my workbench. Many devices have solder points for the batteries and no quick disconnect. If I need to do a hard reboot on those devices (mostly tiny SBCs) I would need to desolder the connector. With this I can keep a charged LiPo around to test boards and to quickly swap batteries if needed.

Perfect size for my projects.

product arrived on time and in good condition. A+

This plug fits on the sprite hotend but know that the polarity is swapped meaning wire color is crossed. Thankfully I red that on here beforehand so I checked before I installed it but other than that it works as expected so far.

They came with the correct orientation for the positive and negative wire. I used the male connectors to convert the popular 803860 battery that people use for PS4 controllers. The connector that comes on those batteries is too large for the new controllers (JDM 40, 50 and 55). This worked perfectly and now I have spares for future batteries.

Bien. Un peut cher mais voilà c'est efficace

Ideal para mis modificaciones de coches de pequeña escala. Los cables un poco duros para mí gusto, pero eso es lo de menos. Muy contento con el producto y envío super rápido como siempre.

Fidèle à la description

Very small connector, though they were 2mm spacing but I misread they are 1.25mm. Wire is about 28 gauge, 10cm with ends (4mm) tinned. The Female connector is 3.51mm x 4.13(including lip). Male is 4.25mm x 7.92. Will be used for led lighting so this should still work.

Die Qualität ist gut, und die Stecker machen was sie sollen. Ich habe sie benutzt um neue Lüfter an meinen 3D Drucker zu verbauen. Wenn jemand etwas ähnliches vor hat hier eine kurze Warnung: Creality und andere 3D Drucker Hersteller sind dafür bekannt die Polarität der Stecker zu vertauschen. Warum? Keine Ahnung... Aber verlasst euch nicht darauf, dass die Farben der einzelnen Kabel stimmen werden. Am besten vorher an einem anderen Stecker gucken wo plus und minus wirklich sitzen, damit man sich keine Komponenten kaputt macht.