XZT Aircraft Aviation Tools Schrader,High Pressure Struct No Air Loss Coupler 556,Couplings to Fill Shocks(Connector：NPT1/8 Male)

Threads don’t go deep enough, it bottoms out before getting right. I had to grind off the flats so that I could screw it in far enough to seat the flare.

I had doubts before even using this thing because the nut felt off center. Those doubts were confirmed when the nut wouldn't tighten enough to seal. Or rather, it was too crooked to seal as evidenced by the seating pattern on the internal washer. Pass on this one.

Works great and came fast. One small issue, the metal T-rod on the end keeps coming out. I'll probably glue it. I used this on some Fox 2.0 Air Shock to add 500 psi pressure. Worked like a charm.

It must be missing an O ring, tried on multiple valves. It can’t work, it’s loose with gaps. All I’m doing is wasting nitrogen capsules trying to fill a shock. Switched it over to a long stem bicycle valve using compressor, it’s total junk. Leaks out of big gaps! Very frustrating. Defective.

Seems pretty well built. I use this to fill my Jeep shocks with 200 psi of nitrogen. It’s a simple device that does what it’s supposed to do.

It looks to be built good but leaks suppose to be a no Loss air chuck I thought I was doing something wrong but it’s an air chuck not brain surgery

Bought this item to fill shock reservoirs for UTV and ATV shocks with nitrogen. Leak so much it emptied my supply bottle and could not get a accurate pressure ready. Waste of my money. Totally unusable

A