Lepro GU10 Smart Bulb, Dimmable 4.5W 385lm LED Spotlight, CCT Warm to Cool Daylight, Compatible With Alexa and Google Home, Pack of 4 (2.4GHz WiFi Only) [Energy Class F]

A brilliant product that gives a strong glow to my kitchen. Easy to add to the app and just as easy to add to Google Home. I would definitely recommend this product. Here are a couple of tips to help with the process. Don't fit all 4 lights at once thinking it will be easy to add them as a batch, it doesn't work and you'll waste time trying to get them to work. The app will not recognise them and will not flash 3 times to link them together. It is better to add 1 and then the other 3 together. If you add them one at a time the lights will reset as each one is added and the OCD in you will always trigger when you have smart bulb 6,7,8,9,10,11,12,13. Trust me i understand... and why does the last one have to be smart bulb 13! When it comes to link them to your voice activated device (Google in this case) you will realise the (insert: smart) reason you bought them was to group them together as one, a function I still cannot work out. You'll swiftly realise that the lights are genuinely smart and do it all for you. The final tip is that you will never tire from asking your device to turn on all the lights.

Hold their WiFi signal well. Same size as standard halogen GU10 so no fit issues. Could support Apple HomeKit or Matter but does support Google and app is okay (can group together, etc).

The one caviat at this point is that I have only had these running for about 72 hours and so cannot comment on long term performance. However, at this point, I am very pleased with my purchase with no issues since installation.I was in two minds, having read the few reviews on here, most of which are quite negative, but I decided to take the plunge and buy 2 packs of 4 as I like smart bulbs, these were a good price and I have been happy previously with the conventional Lepro LED bulbs I have bought.To set out my requirements, we have an Amazon Echo and 7 spotlights in our Kitchen - all, annoyingly, running off one switch. There are 6 in the ceiling and one recessed over the hob. As the reviews suggested they might not work, I decided to just do the one in the hob first to see how it would go.A couple of things to make clear at this stage:1) These will ONLY install on 2.4ghz wifi, so if you have a dual band router (most modern-ish routers will be dual band these days) you either need to separate out the 2.4 and 5ghz bands or disable the 5ghz in order to connect them and set them up. This is usually straight forwardly done in your router's wireless settings. Once everything is set up, you can revert to how things were.2) For any type of tech like this, the stronger the wifi signal, the easier things will be to set them up. Distance or interference affecting the signal will create a stronger likelihood of failure. My kitchen has a very good wifi signal. When I connected to the app and selected to connect over wifi, the app picked up my wifi instantly and once I entered the password, I connected without issue.After registering with my email address and following the instructions in the Lepro LampUX app, I set the first bulb up quickly and once I had enabled the Alexa skill I was able to control the bulb easily with my Echo. People have commented here and in Google Play that the Alexa integration with the app is poor, but I have not found that. I am able to easily switch on and off, set colour temperature (cool white, daylight white, white, soft white, warm white) and dim between 1 and 100%. When grouped, this applies to as many bulbs at once as are in the group. I can also set routines easily again for the precise specifications desired.Once I was confident that I was happy with the first bulb, I proceeded to set up the other 6 all at once. I have seen it mentioned that in a single switch set up like mine, all lights must be paired simultaneously, but this is not strictly true. I simply disconnected the bulb over the hob while I paired the 6 ceiling bulbs and then reconnected it afterwards and all 7 were connected. Of course that means that to replace a single bulb I would have to remove the other 6 but at least that means there is a choice between pairing them all again or just the new one, whichever I decide is easier.The bulbs had to be initially switched into pairing mode using the on-off-on-off-on method in the instructions but I instantly had them all blinking and they then quickly paired one by one and were showing in the app and the Alexa app also found them immediately after. I renamed them in the Lepro app and Alexa immediately updated their names as well - something I haven't always found happens with alternative brands.My one criticism of the app, as mentioned in another review, is the tedious way I have to go through a "how to use" guide every time I selected a bulb to rename. However, since the 7 have been set up and renamed, I haven't had to use the Lepro app again so it is a minor annoyance if using Alexa like me, so not worthy of removing a star.Brightness wise, I am very pleased. My previous Lepro LEDs were 4W 350lm Daylight White and the equivalent setting on these bulbs is as you'd expect from 4.5W 385lm - ever so slightly brighter. The added benefit of these of course is the dimming as well as having a range of additional temperatures, which is ideal for a desired ambience.All in all, since first set up I have not so far had any drop outs or lack of response, even when having tested by turning them off at the wall for a period of time. Time will tell obviously but I'm very happy I went with these at the moment.

Ive installed 20 of these smart GU10 bulbs across 8 rooms. Very happy after install, pairing and linking with Google Home so far.Install and pair with app is easy - had no issues, not even once, did it room by room (turn on/off every 2-3 seconds until bulbs blink fast, then hit add in app and it finds the bulbs immmediately - ensure bluetooth and wifi on).Lights - full kelvin range and brightness low to high is good.App is more than adequate for 3rd party - most important thing is it is stable, setting up is easy, and no bugs (so far).In lepro app, it is worth renaming bulbs to reflect location, group into rooms and set kelvin and brightness as you go along. App also has some automation and scenes.Once pairing and basic setup done, I linked to Google Home - again, very easy and the Lepro connectivity works flawlessly. Took me a couple of attempts to group multiple bulbs into rooms in Google (but that is more google setup) got there in end and not too difficult.Very happy with initial setup and light functionality.Cant speak to longer term reliability of bulbs as has only been a month or so.

very good and convenient product, easy to install and work through the app, and with a timer a good way to control my sleep pattern. in my rented space it has 4 individually switched wall mounted lights and to be able to to switch them all on/off/adjust brightness from my phone is a real win

I bought 4 bulbs to use in my outdoor lights for a garden office. I grouped the bulbs and for around 6 weeks it worked absolutely fine, integrated with Alexa. However now one of the bulbs is unresponsive- unable to connect to wifi and when I try to reset the bulb following the instructions in the app, all the other 3 lights will become “ready to be paired” but not the presumed damaged one. Very disappointing!

Purchased these for my kitchen light.Pros - easy to add to app and create a routine with alexa. Good colour and brightnessCons - often go offline and need to be reconnected in the app

All four bulbs are good after daily service for more than two years. Sometimes they loose connection to the wifi but it doesn’t bother me as I’m using them on a programmed schedule. Nice light, they are dimmable, very good value for the money.