Micro3 ATM Add-A-Circuit Fuse Tap Link with 5A Fuse micro 3

If using for 2017 Lincoln MKX it would not fit in the fuse location for 10A. Had to shave off the small strip on the corners on both sides of the fuse tap

worked as described

Thanks to the guy who mentioned these don’t fit properly. I shaved off the 4 edges with a razor knife and was able to fit it into my fuse box no problem. They need to be trimmed to work properly.

Thankfully, others came up with the solution to my same problem. Initially these did not fit into any fuse location, but after taking a razor blade and trimming just a little bit of plastic off of the long edges, they do fit. Camera is working fine and the install looks much cleaner now, but it was frustrating having to trim a piece you expect to fit properly out of the box. Crimping onto the wires was a breeze though.

Looked like it would work perfectly until I tried to plug it in. The fuses went into holder very hard, ok no problem. It would not fit into my panel until I filed down the body and made it about .020" to .030" thinner. I was careful to only take off what needed to be. This was on a 2024 Chevrolet Tahoe.

Worked perfect ti install a dash cam in my 2022 Silverado

These fuse taps made my GMC Sierra 1500 fuse box so much easier to hook into for the new VIOFO dash cam.

Molding on fuse adapter hade to be shaved back to fit into my fuse box.Fuse hold is extremely tight. Bent 3 fuses just trying to push them in.You get what you pay for. Too bad Buss or Littel didn’t have an option for this.