Simpson Cleaning 3600 PSI Gas Pressure Washer, 2.5 GPM Power Washer for Commercial Use, Honda GX200 Engine, 35-Foot MorFlex Hose, Aluminum Series, 49-State (ALH3425)

I read a LOT of reviews here on Amazon and other online resources before deciding to make such a sizable investment in this 4200 PSI/4.0 GPM machine. This is not my first pressure washer, but my third actually. Each time I upgraded in both PSI and gallons per minute. This is my first pressure washer that is categorized as commercial use. Having finally taken the time to put this machine to the test, I can honestly say this thing has more than enough power to satisfy the average homeowner or DIY’er. As I said in the title: this thing is a beast!Mine arrived complete and undamaged. Other reviewers reported scratches and dents but that was not my experience at all. Assembly was quick and easy. My shipment contained a quart of Amsoil synthetic 10W-30 for the engine crankcase but I have seen other reviewers that got their oil in a plastic pouch.Once assembled, the crankcase filled with the supplied oil, and the fuel tank filled 1/2 way, I hooked up the garden hose and bled the air out for 30+ seconds as recommended. Set the throttle to half-way and closed the choke and gave the starter a quick pull and it fired right up on the first attempt. After allowing the engine to run at partial throttle with the trigger open to keep the water flowing and the pump cooled for a few minutes, I increased the engine speed to approximately 3/4 and started cleaning the concrete patio as my first project with this unit. The pressure even at less than wide open on the Honda GX390 was more than enough to get the accumulated grime blasted off effortlessly. Next up, I connected my 15” surface cleaner which really sped up the process. The 4240 pressure and water flow are a perfect match for the Karcher 15” surface cleaner.With all of the positive attributes of this machine, there is one thing that I feel is a negative: the hose. It’s more than long enough for most jobs but the stiffness makes moving around with it a real challenge. Given the higher than average PSI capabilities of the ALH-4240 it’s not surprising that the pressure hose is more on the stiff side, but as others have commented, it would be a good idea to upgrade to a better hose. Honestly, at this price point, a better quality hose should come with it.Overall, the ALH-4240 is a great pressure washer that has all of the power that the average person could want for DIY use. The high PSI and GPM make short work out of even the toughest cleaning projects. Time will tell if it lives up to the Simpson advertised claims of dependability and reliability.

Wanted to wait for some time to pass before making a real a review on my pressure washer.Purchased in sep 2021 and it’s now Jan 2025, so I have used it for 3 warm seasons since I only use it during the warmer months in PA.Did A LOT of researching before pulling the trigger on getting this unit. Some might think it’s expensive for someone who may only use it for home use and not commercial, but it’s perfect and reliable! I wanted something that would be versatile and beneficial with all projects. I always do the recommended maintenance and when storing for winter I winterize it. Maintenance is key for anything and I believe taking care of this will make it last for years of use.Main selling points for me and things I like:- CAT AAA pump, Honda engine, warranty, GPM, heavy duty but “light weight” frame/wheels, and being able to not worry about damaging the pressure washer if you release the handle while it’s running (not something I do often but know that’s a big no no when it comes to other pressure washers that don’t have the feature to allow this. High PSI and also the ability to lower the rpm’s to use it for lighter duty tasks.My complaints over the years:- The rubber feet that come with this unit are garbage, plan on replacing them with bigger and better feet because these ones will not last and the pressure washer will walk around on you.- I wish there was a better design for changing the oil, it’s a pain in the butt but with the right set up it wouldn’t be a big deal- It a little awkward when wheeling it around but it’s not a big deal and is only heavy if you are picking it up by yourself to go up stairs or things like that.Overall I would highly recommend this and would purchase again! Hope this helps you :)

When it is working, it’s so powerful and smooth. Design and built seems and feels high end and durable, however, it is VERY HARD to start. If the first full doesn’t start, no chance to start at second attempt. I owned gas pressure washer for almost 30 years, none of previous ones does that. It is way more pickier than my previous Excel. The Excel lasts 15 years for me.First, it is picky about fresh gas, it refused to start while brand new maybe just because the gas was two months old, now again, it won't start because the gas was almost two months again. My previous Excel can use gas more than 6 months old, Simpson engine is a princess--high maintenance picky machine.Second, the pressure built up so fast, if the first attempt wasn't successful, no way to start at the second. Even my neighbor who got a cheaper model of Simpson said this one is TIGHT. I'm so SCARED of starting it every time, needs a lot of pulls and luck. Excel only needs about 1-2 seconds of release pressure , this Simpson really needs 30 seconds to try my second luck. To start the machine is a TWO man job, one has to release the trigger on the other end constantly!!Third, even if I'm lucky to start it, it coughs/farts often and I have to be very careful to move the engine from choke to normal SLOWLY, otherwise it stops.Fourth, it gives farts loud several times when switched to off position. None of my previous ones did that, not once. Now I have to get used to the random noise after spending $800!Ordered one electric pressure washer last night, I'm done with the gas one especially with NO HELP from the seller...weird from day 1Tech support is NOT responsive at all! My question never received answer.