FT-891 FT891 Yaesu Original FT-891 HF/50 MHz All Mode Analog Ultra Compact Mobile/Base Transceiver - 100 Watts - 3 Year Warranty

I love this radio! I have owned 5 other Yaesu radios. This is by far my favorite Yaesu radio so far. I do CW/mobile in my truck. I love the ZIN feature, which zero-beats a signal with the touch of a button. This means a lot less monkeying around while driving. You just get anywhere on a CW signal, push the ZIN button and, Bam, your centered on the signal. The display is far easier to read than my other Yaesu radios, even when it's bright outside. It is also easier to program.On my other Yaesu radios, I have really enjoyed having a 300 Hertz Collins cw filter, but it took me forever to get an answer about whether that was an option with this radio. The answer is you don't need it. This radio has a function called APF which is your CW filter but it is adjustable. It also has a ton of other really cool filters.I've enclosed a picture of how nicely it travels in a harbor freight ammo can with a cut up camping pad as a lining.I loved the radio so much that I bought for my truck, that I bought a second one for my mountain cabin.I like that they didn't try to cram a 2-meter and UHF radio into this unit. That just always seemed stupid to me.Great job Yaesu.

I bought this a couple of months ago and for various reasons other than a single instance hunting Parks On The Air I did not get to use it until this weekend for the winter field day.I paired it with a FC 50 automatic tuner it is built to work and a ATAS 25 portable antenna with and the results just knocked my socks off. I had very little problem working through jam ups, and found way more stations then I could work in the short time I dedicated to the field day.Remarkably easy to use, I mostly kept it in scope display mode since I was seeking activity for the field day across the 40 meter band. At the moment I just stuck a couple of Anderson Power Pole plugs on the ends of the power cord. I use this basically as a glorified portable at the moment and ran it off of Bienno batteries which caused no issues , although I do have plans at some point to mount it in a vehicle and further match it up with a ATAS 120.

Works well looks great

great little radio , still learning it , but love it all ready . think i shall love it more once i get to know it better . been operating only a few days since i got it .

I wrote a review for the QRZ News on this radio. The full, updated review is listed below, followed by MIC settings for the hand mic:In this article, I write about what I believe to be an incredible sleeper deal on a truly great rig, for the price. Although not without its quirks, depending on how you want to use it, the Yaesu FT-891 is actually a decent small desktop rig for those with limited space. It can also function as a strong SSB portable option, provided you bring enough battery, and maybe a voltage meter, if you feel you need one.Quick look at Pros:1. Price! Only Alinco rigs are less expensive, so best portable bang-for-the-buck out there.2. 32-bit DSP found in FTDX series aids average RX stats to dig out signals better than rigs costing much more.3. Slightly smaller than even the FT-8574. Excellent power output, and strong cooling (see cons)5. Menu items include wide Hz range Low/High cut RX bandwidth filter, like more expensive radios6. Large display7. Simple Panadapter (radio silent when scanning)8. Five memories to save/play your CQ calls.9. Works with ATAS system, and shares some attachments with FT-85710. Yaesu misprinted the RX amp draw as 2a. It's only 1a draw.11. Buttons are lit.12. THREE year Yaesu warranty!Quick look at Cons:1. Hissing sound makes rear mono audio port useless for headphones (front stereo port is better, but still present).2. If using non-communications dedicated speaker or headphones, HISS in RX audio can be heard, if RF gain at full, and volume raised above 1/2. Assume you will need proper communications headphones, or expect some HISS. This noise is not heard through on-board speaker. Remedy is to use a resistor to block the hiss, or specialized communications headphones. I have found my Motorola HSN4038A external speaker also removes the HISS. You can live with it, using normal headphones, but it is there.3. Phase noise may/may not bother others above 50w output -- see ARRL test report and radioaficion link at bottom. Even amped, a JA friend nearby said my IMD looked fine on his equipment.4. Voltage only viewable briefly at start-up.5. Menus take some getting used to, but are better than FT-8576. Audio is a bit blah through external speaker, but better than onboard audio.7. Fan noise gets loud in a 100w rag chew, but stays low enough at 50w output.8. Not a "shack-in-the-box," because it lacks VHF/UHF.9. No internal tuner, and Yaesu matching tuner is both expensive, and only matches 3.0 to 1. (Get LDG brand)10. ALC can get a little wild, if set to average much above half.11. Some user settings, like signal bandwidth, return to default, when switching between bands.12. Bug info update, per Facebook 891 forum: "...many people have experienced the clicking [beeping?] when using CAT and a USB cable. It seems to be related to the Monitor function. You can eliminate the clicking by going to MON in the quick menu, and reducing the MON volume to zero. The clicking happens even if MON is not enabled. So, reduce the MON level even if you don't enable the Monitor function. (The 'fix' was discovered by a person on the Yahoo FT-891 group.)"13. USB port does not handle digital modes, but there is a work-around (see below)14. My rig maxes at 90-92w output. See Radioaficion engineers link at end of this article, about that.This review will cover every negative of the FT-891 I have noticed, but keep in mind that I feel it's a great value, and the most performance you're going to find at this price-point. Some will want to tear this radio apart, because it's not the second coming of the FT-857, or because some test lab stats aren't absolute perfection, but in my experience, this radio is an absolute steal.Digital mode and CW operators will want to seek more information elsewhere, as I am almost entirely an HF SSB guy. I will add that I have read this radio is not the best choice for digital modes, so you may want to research it. Otherwise, I hope this exhaustive commentary proves useful.I'm running under the assumption that Yaesu is just not selling a lot of FT-891's. That is the only reason I can see for the price being so low. At the moment, you can get them for about $630-$680, shipped. That's in the same ballpark as their famous, yet older FT-450D, but the new FT-891 comes with extensive 32-bit digital noise reduction technology improvements found in their higher-end radios. True, the FT-891 has no internal tuner, while the FT-450D does, but with a resonant antenna or a strong external auto-tuner (which many supplement the 450D with, to run a wide-band antenna, anyway), the FT-891 is the more versatile rig. There are lots of little adds in the FT-891, including five record slots to save your CQ audio, so you can call CQ, or say whatever you like, with the press of a button.Improvements in DSP over the FT-450D are huge. The noise reduction actually works very well, with less tweaking. It is a welcome change. Some may complain that Yaesu's implementation of DNR is a bit watery-sounding, but I find a little DSP SFT (shift), and proper RF/AF gain removes most of the bubbling. I like it.Better on Rx than ICOM 7300?I will say this without any bias -- I am shocked that the Yaesu DSP is easier to use, and in my opinion, better than that of my highly-touted Icom 7300. I own one, and am not alone in this.Before purchase, I watched a video on YouTube, where Jerry Koch said he could pull out signals better with the FT-891, compared to the IC-7300. I rolled my eyes. I am an owner of the ICOM 7300, and ALC aggression issues aside, I love my 7300 for it's ability to pull out signals. I figured Jerry had lost it. I wanted to tell him off. How dare he? There is a $600 difference between these two radios, and the 7300 is the SDR radio that redefined the industry. I nearly posted a nasty comment, in the name of Sherwood, demanding he apologize for such a travesty!Full stop.I had viewed Jerry's video before I purchased the FT-891. Once I had the new Yaesu in the shack, I was able to experience the same. I was in a rag chew, and increasingly unable to copy a weak SSB signal fully on my 7300. I reached a point where no amount of Twin PBT, RX bandwidth filter adjustments, attenuation, and EQ'ing could produce better than 50% copy. Remembering Jerry's claim, I switched the antenna over to the FT-891, added a DSP level of 1, a little RF gain, and a slight shift, and -- boom. I understood the other op 100%. Dumbfounded, I switched back and forth between the two radios, and found the FT-891 was consistently better, given my noisy city environment. Although the 7300 tests as the more sensitive rig, it falls flat when overwhelmed by noise.At my city noise levels, I find myself preferring the FT-891's noise reduction capabilities over the darling 7300, because whatever algorithm Yaesu uses is just far better. A tiny bit of DNR, and a bit of shifting, goes a long way. No to mention, the FT-891 includes a 3k roofing filter, which helps a great deal, in noisy environments. Does this make me want to stop using the 7300 at home, and enjoy the 891, instead? I tried that for a week, and went back to the 7300 due to overall better sound, but for what it is, the 891 does a very good job. What this experience did teach me is that I might dump the 7300 for a higher-end Yaesu rig, like the FTDX3000, or something else Yaesu, next year.Will the FT-891 best the 7300, in all situations? No. The two radios are not in the same class, and I am only comparing them because I own both. On receive the two rigs are pretty similar, in 95% of situations, with the all-around sound quality edge handily going to the 7300. The FT-891 sounds kind of flat and lifeless. They both pull out the same signal, but the 7300 does sound better doing it, through either on-board, or 3rd-party speaker. That is to be expected, given that the FT-891 is only the size of a thick book. The FT-891, however, hits that sound range where the receive audio is most important to copy the signal. Great, for what it is. The 7300 has some deep-menu items (receive filtering and EQ) that give it an edge, at times (and others not), but this takes a lot of signal-dependent tweaking, and timely adjusting, to get there. Again, these are very different radios, but remember the price -- the FT-891 costs HALF!A test with an on-air friend confirmed -- even though they are the same wattage, and the ICOM has a much better quality sound from its microphone, the FT-891 has what he described as, "more punch." That can be useful. I tested various levels of compression and mic gain, on both rigs. In short, the 7300 will almost always get "clean audio" reports, because ICOM forces aggressive ALC on you, but the FT-891 is capable of decent audio also, and a louder perceived signal, if you adjust it right. But, there are trade-offs. Don't be naughty. Follow proper adjustment procedures (you can mess your transmit audio up, if you don't follow the manual).I added a Behringer xm8500 mic, and a homebrew patch cable, and my audio showed dramatic improvement. Please pay attention to the ALC settings, however. Keep it peaking at midpoint. Set it too high, and your signal will appear louder on the meter, but you might splatter.I have purchased an E-bay seller W7YEN's amp cable for my FT-891 to connect to my Tokyo Hy-Power HL-1.2KFX, and was thrilled to find that it pushes the amp better than my ICOM 7300, also. Why? The 7300 is so strict with the ALC, that even at full 95 watts drive for the amp, the peaks are lower than with the Yaesu. The FT-891 pushes the amp to the max, at 85w drive, if I so desire. I have read that it is best to run an amp that works with 50w drive, because the FT-891 gets a little dirty on transmit. I amped mine to 700w+, and a JA OP nearby (I am 750 miles away, in Seoul) said my IMD distortion was about average, driving my Tokyo Hy-Power 1.2kfx amp excited by the FT-891, at 85w. Any higher, and he saw IMD grow. I can drive the amp just fine with 85w, anyway. I religiously keep the ALC at half, or below. A closer measurement would be an interesting comparison, but I plan this to be a portable rig, so I will rarely be amped.I am getting better signal reports from people, after tweaking the stock MH-31 mic of the FT-891. I had to enter the menus and roll off the lows down below 300hz, and add a fair bit of emphasis to the mids and highs. I also find setting 1 on the back switch of the MH-31 mic is good for local rag chew, and setting 2 is better for distant DX.The Backlash: Not an FT-857 ReplacementWhen the FT-891 came out, people expected it would be the replacement of the FT-857. It's not. The FT-891 has no UHF/VHF (a source of much disappointment, for those who want one radio to do everything). in addition, the FT-891 was found to lack important features expected of mobile, and SOTA-style rigs. Specifically, there is no read-out displaying voltage, other than briefly, at power-up. From that point, IDD amp current drain on the final stage transistors can be accessed via menu, but if there is another way to view voltage or overall current draw in amps, I haven't found it. Portable operators will want an external meter, and will find themselves dreaming that they could have been a fly on the wall when a table full of engineers in Japan decided these omissions would be acceptable. I can only surmise that not adding a real-time voltage display was on purpose. Perhaps they didn't want to take a bite out of more pricey FT-857 sales, or make the FT-817 look less appealing, in the downward sun cycle? I have no idea. If running from a desktop, you won't care, and you can always turn the rig on/off, if you need to see current voltage. It's an odd work-around.Next, comes a very odd misnomer. The FT-891 is listed as eating 2 amps on receive, in Yaesu specifications. This scared away portable buyers, and was the source of many negative posts by hams who were waiting for an updated FT-857, yet had never actually tried the new radio. I have no idea why Yaesu claims this high number on receive, because they are incorrect (scroll to the bottom of this article, or search Youtube, for actual tested current draw numbers). The FT-891 listens comfortably at 1 amp.Like it's predecessor it's not very efficient, if you want to transmit. The FT-891 can transmit at 5w, but as you'll see from statistics, you may as well be transmitting at 10w, or 15w, because you're really not saving much by running QRP.Getting off track here -- I recently purchased an incredible Lifepo4 12.8v, 10Ah battery with massive 20amp current draw, and I'm in portable heaven with this rig. I can transmit at up to full power, with typical SSB RX/TX usage levels, for more than 3 hours -- no problem. I highly recommend dumping the old/heavy gel cell for a 10Ah Lifepo4. Mine is the size of a large coffee mug, and weighs just 1.1kgs (2.4 pounds).I sold-off my Elecraft KX2 for this rig (and I loved that radio). I'm still happy doing so, because I have a lot more power available. With the downward sun cycle, having extra power on command is not such a bad thing!Having full QRO power at my disposal while portable means I don't miss much, unless there is a big pileup, and I can use this rig as a back-up desktop machine, should I have the need. My KX2 could fill those roles somewhat, but at 10w max output, it was a short dog peeing in the tall weeds.ARRL and High IMDA more recent source of negative talk about the FT-891 are regarding high IMD in the June 2017 QST test by the ARRL. I have seen online comments about these tests wrongly quoted by operators, who said the ARRL does not recommend the FT-891 as a desktop radio, which is untrue. They had a lot of nice things to say about the FT-891, but here's the worst of it...To paraphrase, Bob Allison, WB1GCM, mentioned on page 55 of the June 2017 QST review, that the transmit phase is about the highest they've yet seen at the lab. He also said he would be wary of pairing this transceiver with an RF amplifier, and that users of the FT-891 should watch the ALC level when transmitting voice, because transmit IMD levels tend to get high if the ALC indicator reaches the top end of the scale. Likewise, keep the ALC level low, in digital modes.To review, the suggestion by the ARRL was to keep the ALC set midrange, or below, but no higher, to mitigate the problem. I have also noticed that the FT-891 loses its lunch a bit, and transmits somewhat high peaks, when the ALC has to work in its higher range. Seeing that one of the first things an op should do is to properly set the ALC, for best performance, this doesn't bother me. I'm seeing fine results, keeping this in mind, along with lowering the mic gain from the stock setting of 50, to around 30, and the processing/compression level down to about 30. I have noted ALC changes between bands, and mic may need adjustment on 40m. I end up needing to raise the mic level for 40m, and lowering a bit for 20m, to stay in the first half of the ALC, with the stock mic. I added an external Behringer XM8500, with homebrew patch cable, which is much more consistent.There are additional tests found in the radioaficion link below. It sounds like, if you are wanting to amplify this radio, you may want an amp that makes its power at lower drive, for a cleaner signal. I suspect, however, that most buyers of this radio will not be adding an HF amp.If small-footprint desktop operation is your interest, this is one cheap deal for a rig. What you're getting is the latest 32-bit DSP technology (found in the FTDX series), packed into a tiny box that outputs nearly 100w. I used to own an FT-950 (the larger brother of the FT-450D), and there is no comparison -- the FT-891 absolutely SMOKES the FT-950, in noise reduction, and probably overall receive in noisy areas, as a result. Online comparisons from owners of the 450D say the FT-891 is far better. In short, this is a DSP that truly works as DSP.As mentioned, the FT-891 is a nice desktop space-saver. Reports are, than when controlled via its USB output, using updated/paid Ham Radio Deluxe (the free version doesn't work with it), the rig becomes as easy as pie to control. There were early complaints about the FT-891 having USB compatibility issues with certain programs, but this is not uncommon, and problems are often fixed through updates. Check with any 3rd party program providers for latest compatibility if your intent is working digital modes.It was said in a YouTube video, that the smaller rigs receive some of the trickled-down improvements of the flagships in the same series. No doubt, this is what has happened with the FT-891. It's really like getting an FTDX1200 in a small box, at almost half of the price. It also boasts a much larger screen than the older Yaesu FT-857 (and don't forget, the FT-857 has suffered from screen issues, over time).A Good Mobile Rig? Possibly.I mentioned a few of the negatives of the FT-891. Let me mention a few more, and let you decide if it's a problem, given your usage. Like the FT-857, the FT-891 is a menu-heavy rig. It has been mentioned that this would be a difficult rig to use in a vehicle, while driving. If you were on the move, and hoping to adjust things like power level, or anything outside of your top 3 programmable quick-button menu choices, then yes -- it is difficult. The truth is, however, that taking the time to make changes on ANY rig, while driving, is dangerous (and may be illegal, in some states). It's much like texting behind the wheel. There isn't a lot of difference between the FT-891, and FT-857, in this regard. Band changes are done in a bit of a quirky way in the FT-891, but the method has grown on me. I find it not as bad as some have reviewed. Perhaps there was a firmware update improvement, but I don't find it "too fast" to jump to a selection, before you are finished, as some have complained.From a desktop situation, however, given what you give up to enjoy the tiny footprint, I don't find the menus to be as horrible as some make them out to be. Hunting menus is never fun, but a long-press on the F button will take you back into the same area of the long-form menu, where you left off (essentially giving you a pseudo 4th quick button). The menus hide some very nice additions. For example, you can head to menu items 11-01 to 11-04 and find High and Low cut settings to tailor your receive audio -- nice for DX! The back to default of menu items like RX bandwidth between band changes is a downer. It does not keep this setting, which is annoying.Yaesu's Sad Matching TunerAnother thing to consider, is the choice of tuners. The FT-891 has NO internal tuner, and Yaesu doesn't give you a good choice for an automatic tuner. The FT-450D does offer a basic antenna matching (tuner) device. The FT-891 is a newer rig, and it will likely take time for companies such as LDG to come out with a dedicated 3rd-party tuner. You CAN use one of LDG's generic-model auto-tuners, however, and these will allow you to use tougher matches to antennas, such as the G5RV. See LDG's link to its list of compatible tuners, which I found in the text on the first page of their site. At the time of this writing, these include the Z-100 Plus, Z-11 Pro II, AT-100 PRO II, and AT-200 Pro II.** Note: One op on Facebook's FT-891 Group claimed that he called LDG and confirmed his FT-857's matching YT-100 tuner works for the FT-891 also, but I cannot confirm that from anywhere else, and I suggest contacting LDG directly yourself, for the truth. They still do not list that as a compatible tuner for the FT-891.Yaesu does sell its own tuner, matched for the radio, but I was left unimpressed. It's about the same size as the FT-891, but it's very pricey (well over $320). It only matches antennas up to 3.0 to 1, or better SWR, or thereabouts. That is NOT good enough for a G5RV on all bands. What is the point of an external tuner so poor that it acts like a cheap internal? Stupid. It also clicks constantly as you tune, and pops up an annoying "WAIT" message on your FT-891, while you spin the dial. Search for YouTube videos showing it, to see what I'm talking about, then order an LDG model. You can buy, or make an LDG cable that will interface, but it's not a requirement.This is a radio that works best with an external tuner, but you can use a manual, such as an MFJ Versa Tuner (I do). Another ham gave me a great tip: Set the AM power output to something low, like 10 watts, and change over to AM for a tune-up on the band/frequency you want to use. Then switch back over to SSB, or whatever mode you are using. The FT-891's menus have a few different menu numbers to set power output using various modes. This is a bit confusing, but HF SSB PWR (16-01) is the SSB power output. Don't get it confused with HF PWR (16-03) which is actually something completely different (I think it's for digital power output). Don't ask me why -- it's odd.Not a Great Digital Choice?Another important mention, for digital ops. Although the FT-891 has a USB port, it does NOT have an internal sound card through USB.* Update: From AF5CC:"The FT891 does digital VOX, so you buy the Yaesu CT-39A packet cable for $12, plug it into the DATA jack on the back, hook the other end to your soundcard, turn on the digital VOX, and you are done! When you go into data mode it will switch back and forth between RX and TX when you send and stop sending.". Note, according to the ARRL, there may be phase noise issues, which mean you'd need to keep this rig below around 20w in digital use, or you (in theory) might mess with other operators in close proximity. By reports I have read, it works great with FLDIGI.On Panadapters and Earphone JacksIt should also be noted that the FT-891 also has a panadapter. In truth, it is little more than a novelty, and not real-time unless the rig is silent. It may be useful in some situations, but don't buy the rig thinking you'll be using it much. You can set it to refresh itself every few seconds, but I find that's rather annoying. You can long-press the button and make it scan the band in real-time, but you lose sound while this is going on. Sound comes back when you exit the mode. The original big-brother FT-991 (non-A model) was the same way.Lastly, the FT-891 has a small earphone plug output on its left side, which allows you to hear audio through headphones. It does work through both ears (although my rear speaker jack appears to be mono). There is a small adjustment switch behind the panel, which can change the front jack to either mono or stereo. Leave it on stereo, for best sound. Luckily, this semi-hidden front jack does not suffer from the HISS issues of the rear jack AS MUCH. Hopefully, Yaesu will work the problem out in future models, but it wasn't a deal-breaker for me, because the front jack works well enough. If you listen at low volumes, avoid this rig, until (hopefully) updated.The Yaesu FT-891 is a steal of a rig, for the price. You're getting the newest technology from Yaesu, packed into a footprint slightly smaller than their dwarf powerhouse, the FT-857. True, you're giving up VHF/UHF, but we're living in a time when capable Chinese radios are $25, and low-end Yaesu VHF/UHF HT's are approaching $100. Sometimes it's actually nice to have a 2nd radio, so you can monitor everything, at the same time, so maybe it's not always best to have everything in one box? That's up to you, and your situation of use.If you're interested in a new radio, at a bargain price-point, give the FT-891 a hard look.FT-891 Mic Setting TipsThe Yaesu MH-31 hand mic, which comes with various radios including the FT-891, doesn't impress most people. I find that some EQ'ing can turn the sound into a very pleasing one.My reports are excellent, so I'm passing this on. Your adjustments may differ slightly in the mid settings, depending on your voice (I have a mid-trebly voice). I made these adjustments while listening to myself over another radio, then by listening with a remote station.First, even before EQ'ing, it's very important that your ALC is set to peak at 1/4 to never higher than 1/2, for clear audio (the FT-891 gets wacky above 1/2). You'll want to adjust the ALC after EQ-ing, and watch it between band changes, as my levels change. I have not installed the most recent Yaesu FT-891 update, per this writing, so I cannot say if this has changed.Next, I prefer Menu 11-09 TX bandwidth set to the stock setting of 300-2700 for DX, or for rag chew, set to that or 200-2800. There isn't a lot of difference, but the 2nd choice adds a bit more bass and clarity for those rag chews with better machines on the other end.As for EQ, notice that I roll-off all lows below 300Hz. This is very important Also, I leave Compression (PRC in quick menu, set to my preference, between 25 to 35) on all of the time. These settings ONLY work if you are using compression (PRC highlighted):Next, we're looking at the longform menu P-EQ1 settings, starting with Menu 15-10:P-EQ1 FREQ 300P-EQ1 Level -15P-EQ1 BWTH 8P-EQ2 FREQ 1300P-EQ2 Level 8P-EQ2 BWTH 8P-EQ3 FREQ 2300P-EQ3 LEVEL 10P-EQ3 BWTH 8I set the switch on the hand mic to 1 for local rag chew, and 2 for DX.Please note, if you do not like to use compression, you must make the same settings beginning with menu 15-04, which is the same EQ list, but only affect when not using compression.I hope these settings provide some guidance.

Awesome radio. Love the features and quality. Definitely recommend.

EXCELENTE PRODUCTO

I've used it for SWL all over the spectrum, and for operating on 40, 20, 10, and 6 meters. Aside from the fact that 10 and 6 are pretty much dead at this point in the solar cycle, I haven't had any issues with it. With only a middling antenna (an inverted-V OCFD hanging in a tree in my back yard), I've made contacts from Ohio in California, Cuba, and Mexico at 20-25W. (The radio will push 100W, but much over 25W and the neighbors' houses become haunted.) I've had particular success with the Digital Noise Reduction, especially on algorithms #1 and #4.I have not been able to use the USB rig control from my computer, but that's probably my fault rather than Yaesu's.Operating the radio seems overly menu-oriented, but that's unavoidable given the limited space for front-panel controls. I do find that Yaesu tends to pick three-letter abbreviations that are not at all intuitive to native English-speakers; but once you learn them, that's okay.