ErgotronLX Single Monitor Arm, VESA Wall Mount for Monitors Up to 34 Inches, 3.2-11.3 kg - Matte Black

Robuste tout en étant flexible pour mon écran curve de 32 ”. Je suis très satisfait. Point d’amélioration: instructions pour bureau ajustable (hauteur).

Pros1. Great extension, one of the furthest I’ve seen on Amazon. Perfect for a deep desk like mine.2. Easy assembly if you’ve done this sort of thing before.3. Very easy to adjust my monitor on the bracket.4. Build quality of the mount feels solid.Cons1. Included lag screws are junk. They didn’t fit my 1/2 inch nut driver by a centimeter, which felt like poor machining. Other reviews mention shearing after install. Do yourself a favor and pick up a different set. I used a 5/16 4” lag screw set without issue.2. Instructions are very bad, but this isn’t too much of a con since there are only 3 pieces to assemble. Be sure to get your mounting height exactly what the instructions specified! This was the only useful information in the packet.3. High cost for what you’re getting, but a necessity if you need a more considerable mount for a deeper extension.

This is my second Ergotron mount. My first was a desk mount LX, and this wall mount LX is my second. The arm is great but the lag bolts that were given to install the wall mount were subpar. They snapped while installing them as you can see in my picture. I drilled the hole the entire length of the screw and while installing the lag bolt it snapped, rendering the mount useless. I am going back to getting another LX desk mount because those clamp bases are sturdy and well built. Arm is great, but never was able to mount the arm and my monitor.

少し特殊な使い方で、カウンターキッチンを挟んで180度違う向きで使用する為に購入。初めてのモニターアームの購入で他社製品と比較したことは無いのですが、アームの可動範囲を調べながら探していたら、この商品しかなさそうな感じだったので、高額な事もありましたが、迷いながら購入。これ以上、自分の使い方に合った商品は無いと思います。可動範囲が半端無いです。自宅にあった安いラチェットセットには、付属の13ミリに合ったものが無かったのと、取り付けの壁面に対して付属のボルトが長すぎたので、工務店でその2点を購入し、出荷状態だと、アームの動きがだいぶ硬い状態だったので、説明書の絵を見ながら調整。かなり満足しています。

This is an Ergotron arm, so it is of course going to be one of the most reliable monitor arms on the market. That being said, there are a few minor annoyances that hold it back from being truly great.First off, the arm has cable management channels, but it requires you to use zip-ties in the upper half of the arm; the mounting holes aren’t large enough to fit even a small Velcro tie through. The lower half of the arm uses a plastic sheath, but I wish that the plastic was both thicker and used a sturdier clasping mechanism. If you have thick cables or multiple cables going to your monitor, they can pull the plastic cover off when you move the arm side to side.My second gripe with this arm is the wall mounted base. While it is small and easy to hold up while mounting since the base is separate from the arm, there are no square edges anywhere on the base; every side is rounded. This means that leveling the base is nearly impossible, since you can never be completely confident that you’re holding the level perfectly straight, it could be off by a degree or two. I’d like to see a revision of this product with a flattened top or bottom edge. (or better yet, an integrated level)As for the actual functionality of the arm though, it is top-notch. The arm feels durable and sturdy, and is capable of holding up fairly heavy monitors with a moderate curve. I’m using an Alienware AW3423DW with it which is about 16lbs. I have had no issues adjusting the monitor at all; all the adjustment screws are easy to reach with the appropriate tool. I do wish the arm had a way to store the Allen keys used to adjust the gas arm pressure and tensions.Pros:- Sturdy, high quality parts and materials.- Easy to adjust- Zero wobble- Excellent range of motionCons:- Upper arm uses zip ties for cable management.- Lower arm cable management sheath is flimsy and pops out easily under tension.- Wall mounted base is difficult to level because of the curved edges.