Modengzhe 40"x13" Car Grill Mesh 6x3mm Aluminum Alloy Grille Mesh Sheet Rhombic Type Black

Good.

Good Quality product and delivered extremely quick on multiple purchases.

Easy to work with but be careful not to bend too hard as it breaks easily. Best suited for straight flat surface finish.

Product perfect besides the fact that it is shipped rolled up. Takes a while to flatten it out but it save on shipping. Used mesh to create custom grill for my car. Worked out perfect but give yourself at least 2” overhang on all sides when considering the purchase of this item. If you need 10x20 then order a size that is 14x24 or larger. Still holding up strong til this day. 5 months later

Installed this over a year ago to help deflect rocks from passing through the grill on my vehicle. Holding up well, no issues at all still even looks new.

I purchased the Modengzhe Car Grill Mesh for my new 2025 Hyundai Santa Cruz. I read on several internet message boards that several Santa Cruz owners had stones kick up from the road causing damaged radiators on their Santa Cruz vehicles due to the wide open plastic from grill design. I decided to order the 40 x 13 inch Universal Black Mesh to match the Phantom Black exterior. I cut this Grill Mesh to fit the bottom opening then used zip ties to secure the mesh to the plastic grill. The Grill Mesh was a little short on the sides but there is no grill opening in that area. Looks great and protects the radiator. I highly recommend this Grill Mesh.

First, actual measurement is 39 3/8" x 13" NOT 40" x 13". The length description should be corrected. Two were purchased with same shorter length. As far as the material, it was very easy to work with. You will need to flatten the mesh as it comes rolled up. Cuts easily with snips without any issues. Installed to protect to two vehicles, 2nd Gen Honda CR-V & 8th Gen Honda Civic, A/C Condenser and Radiator. Hopefully this will help to minimize impacts to the condenser, especially on the Civic that is lower to the ground.

I drive a WRX, which has a top mount intercooler. I wanted something to protect the Intercooler from road debris without restricting airflow. This was perfect! I was able to mock up with cardboard and cut to size this screen for the scoop easily with sheet met snips, side cutters would work too, and there was enough material to cut and mount it to the intercooler itself.