Pro-Seal Instant Adhesive, 0.01/0.02 fl. oz., Clear, .04 Ounce (61067)

Works great!

Easy to use ; works just like it says on instructions

Followed the directions to the T. Even waited a little longer to attach the mirror due to being in the Florida heat. Put the adhesive on at night time so that the window was cool and waited two days before I put the mirror on it still fell of the window 2 seconds after the mirror was hung. Did not cost much now I know why. Product is junk. Went to a local Autozone same day, should have done that in the first place, bought a similar but different product and it worked perfectly. Did the same thing as the first one. Cleaned appropriately, put the adhesive on at night, waited the same amount of time, and this time it stayed.

This product flat out works and was really inexpensive compared to other adhesives. There were many complaints, but I believe those people did not know how to use the product. The instructions were bad.1) clean off old residue on both windshield and the metal part of the rearview mirror with acetone. Let it dry. Use Glass Plus or other window cleaner afterwards and let it dry.2) Do not try to install the rearview mirror as a whole assembly. Remove the metal attachment that is attached by a screw.3) Make sure the orientation of that metal attachment is correct! Otherwise your rearview mirror will be upside down when you reattach it.4) Then just follow the directions. Reposition the white paper cover of the activator tube to its other end. Crack the glass to soak the applicator sponge within the activator tube. Apply the activator (wet sponge end) to both the metal side of the metal attachment that will attach to the windshield, as well as, the corresponding area of the windshield. Wait one minute.Meanwhile compress the plastic adhesive tube repeatedly to mix it. Tear open the adhesive tube. Apply five small drops only to the metal side of the metal attachment that will attach to the windshield. Do not apply the adhesive to the glass.Then press the metal attachment to the windshield and hold for one - two minutes tightly. Wait overnight.Put the rearview mirror assembly on to that metal attachment and screw it back on.The adhesive works as intended.

Price was good and worked well highly recommend

My rear view mirror fell off. Bummer. It looked like the back of the mirror had a circle of metal foil of something that was still attached to the glass, while the mirror was just solid metal. And this stuff looked like it would do the job.And it did. I smeared one of the tubes all over one side, then mixed in the other tube. Held the mirror in place for about 10 minutes (wasn't fun), let go - and it didn't fall. The next day, taking the car out for a drive, I didn't even think about being gentle before adjusting the mirror, and everything stayed on perfectly.So, the 6 or 7 bucks did the job. Recommended.

Didn’t work for me. Put it on at night and the next morning with the mirror on and it fell. Super glue by itself fixed it, so far and it’s been a month

Comes with glue and activator, but the activator was completely dried up. Really old product, I’m guessing.