LK 8 Pack for Apple Watch 44mm Screen Protector Series 6/5 SE2 [Upgrade Soft Film] [Self-Healing] Ultra-thin Film, Screen Protector Apple Watch 44mm, Anti-Scratch, Touch Sensitive

Work great, easy to install and fit right to the edge. I like these because they addThe scratch protection without being overly time consuming to apply. Seem to be durable enough and no issues with bubbles or defects.

I usually prefer tempered glass screen protectors, because they look and feel just like the original watch face and you can't tell they are there. But, I can find any that cover the entire screen, (edge to edge) for the series 10, 46mm Apple watch. I had the glass ones that don't go all the way to the edge on my Series 6 Apple watch and they break and spiderweb all the time, I went through an entire 6 pack in as many months, but once I found a tempered glass one that goes all the way to the edge I never had to worry about it breaking again, I've had the same one on there for 3 years now and no problems. Unfortunately I can't find any for the series 10, 46mm. I usually don't like soft film protectors because they have a kind of sticky feel to them when you are using the touch screen functions , they don't feel like the original screen, and you can fell they are on there. After searching and reading tons of reviews I decided to go with these, they also happened to be the best bang for the buck. There were no alignment tools or anything in the box that would help get the thing on straight, no instructions either, but I was pleasantly surprised on how easy it was to install. There is a video right in the Amazon listing, and that worked perfectly. I easily got it on the first try with ZERO bubble problems, it fits on perfectly, it's on perfectly straight, it is completely invisible and goes from edge to edge with zero % of the screen not being covered . You can’t even tell it’s on there and there is no sticky feeling that normally comes with soft film screen protectors. To me those are the most important features of any screen protector, its on straight, there are no bubbles, and you can't see or feel it at all and it covers the entire face. This one fits the bill perfectly, I couldn't have hoped for a better solution that this.

I bought two different products; one for ultra watch 2 and the other one for iWatch 10, from the same company and seller. The one I bought for Ultra Watch 2 was very good; it was easy to apply.But the model I bought for iWatch 10 is not that good. First of all, the video that opens when you scan the QR code on the back of the package has nothing to do with the product. It is very difficult to apply the product to the watch. There is a fold in the middle; when you remove the product from there, there is an air bubble and it does not go away. As I said, the one for Ultrawatch is perfect but the other is ok. The seller was just so kind and refunded the one with problem.Btw, it is a very thin plastic layer, not a durable material

(I am copy/pasting this review from my review as it is the same review of a different size. Both work the same but are listed as different products. No noticeable difference between the performance of the 40 and 44mm versions.)This will be the longest screen protector review ever so I will divide it in sections so you can skip to what interests you.About me: I’ve been using PDAs and mobile computing since ~1999 and learned the importance of screen protection early on with one of my Palms. I worked in an environment with air and waterborne abrasives and screens would get ruined. My wife and children use mobile devices and I have applied hundreds of screen protectors for our family and friends.Apple Watch screen protection: The problem is the curves. Despite using some kind of miracle glass the Apple Watch gets scratched pretty easily. My wife works in an office and when we got ours I trusted that there would be no way she would need a screen protecor. Boy was I wrong! I looked at hers after a couple months and it already had some nicks and abrasions. So now everyone is on the screen protector schedule. We started with the model 3 and then gifted ours to our 2 children when the Model 4 was released so I’ve been keeping up with four of them. I have used many screen protectors and all of them “work”, but the only *problem* is that the edges will come up with the brush of a sleeve or any other friction along the edge. Always, without fail. If you can remain aware of that failing there are ways of preventing the peel, but that means living with yet another worry. I’ve managed a couple months without the peel, but it eventually shows up. Why do they peel? Probably because of low-tac adhesive and the other ones I’ve tried are thicker. That thickness gives them a bigger edge to grab and are harder to hold down on the curved section.*(I used some glass protectors with curved edges and couldn’t get a bubble-free installation)Installation: I’m not sure if alcohol will sufficiently remove all oils so I cleaned mine with a very diluted Dawn/water solution followed by a water rinse, then alcohol wipe.Shining a flashlight across the surface of the Watch will reveal any dust that doesn’t show up with perpendicular lighting.I watched the video twice and followed the application instructions exactly, (except for my additional cleaning step), and the first protector went on perfectly. It was ready instantly, no overnight curing time or incessantly keeping up with the sides and corners wanting to lift up until “cured”.Screen protectors - The Hidden Cost: The Watch is sold with fanfare regarding their special glass formulation to keep it scratch-free. If you are lucky enough to live a life surrounded by soft things and never get out in the real world then that may be enough. It wasn’t for me, my wife, or my children. So we buy screen protectors. I was going to include a list of the various protectors I’ve purchased, but it is embarrassing. Some lasted longer than others but in the end they all died of the dreaded Peel. Some lasted longer than others, but results varied even within protectors from the same package. I try to reduce variables by having a consistent application method but nothing can stop the inevitable peel. I’ve used BestSkinsEver protectors on devices in the past with great results before the tempered glass protector revolution but even they failed on the Watch. Additionally; people have different skill levels and dexterity so applying these finicky things can often end in failure. This application system greatly reduces failure if you follow the instructions.Another “cost” is application time. With the other protectors I have to wait until the end of the day and spend time applying and tending to the watches. With my very first installation of these I was done in under 10 minutes and popped the Watch back on my arm. Subsequent applications should be under 5 minutes.Conclusion: These may eventually peel off like all the rest, I will update accordingly. But even if they do I will continue to use them because they are the best of the MANY screen protectors I’ve used if only for the ease of installation. I am confident these will greatly reduce “The Peel”, but time will tell. Because these are noticeably thinner than all of the others I’ve tried it’s hard to tell that there’s even a screen protector on the Watch!Sensitivity is fine, nothing weird about the surface, I am so happy to have finally found these because it’s been a pain in the neck keeping up with these darn things. Even if they only last as long as the others the cost is about the same but installation is a breeze.I will definitely update as time goes by.For the record: I have no affiliation with this company and receive no compensation or benefit of any kind for this positive review. I am writing in an effort to share my experience with this frustrating aspect of Apple Watch ownership.edit: the years go by, these are still the ones I choose. Crazy thing about these: once the other brands start peeling you might as well tear them off. There's no way they're ever going on again. These can re-adhere if you haven't gotten a bunch of junk in them. I've even ripped off the peeled up section and continued using it. Still the best!

This review is for the "LK 6 Pack for Apple Watch Series 10 Screen Protector 46mm, [Flexible TPU Not Glass] Self-Healing, Max Coverage, Bubble Free, HD Clear Screen Protector for iWatch Series 10 46mm, Anti-Scratch"I don't generally use screen protectors on my devices but I've had a few near misses with scraping my watch against a wall etc so I decided to err on the side of caution. I will say that the installation process was pretty well designed and explained. Follow the instructions carefully and you should end up with a nice fit on your watch. I was worried that the edges might peel over time (I don't use any kind of hard shell case around the watch) but it's been almost a month and it's as good as it was on day one.