KPREPUBLIC Everglide EG Aqua King Water King Linear Switch 4pin 5pin RGB 55g 62g 67g Force mx Switch for Mechanical Keyboard 50m Clear Body (X90 PCS, EG 55g Aqua King Switch)

These are smoooooth and make typing a joy. I sound is silent, consistent and marbly. Currently using these in my modded GMMK Pro with a white FR4 plate. The clear housing of the switches paired with the white plate really helps the rgb blast through the keys.Highly recommended. You can’t go wrong with these.

Quality switch that is very smooth. The switch has a fully polycarbonate construction, and the housing is very tight. There is virtually no stem-wobble, and so they feel very nice to type on in that sense. The factory lube is probably the best I've ever seen, although it can borderline on being overlubed. Out of my 70 switches, 3 were overlubed to a point where the switch was sluggish and the stem would not return to the top position without some help; so definitely order a few more than you need for your build. Very smooth, decent sound signature (definitely crisp, borders clacky more than thocky), and very good construction.

First non-Cherry/Gateron switch I've used and it's very nice on my GMMK Pro build. Very smooth and no issues. Factory lube is more consistent than Gateron's, although probably still not as good as doing it by hand. Personally I don't want to fool with that so I'm happy with the factory job.Be aware that there's some confusion on actuation force / bottom out force. Although Amazon lists 62g / 67g as the actuation force, this is in fact the bottom out force. The 62g feels like a Cherry/Gat Red, while the 67g is closer to a Black. I initially went with the 67g thinking the 62g would be too light for me coming from Gat Yellows, but when I got them I found they were too heavy for me. I've returned and replaced them with the 62g, and they feel very nice. I recommend most people go for the 62g unless you like a heavier spring.

You can do all sorts of searching around on what you think you might like as a switch, but until you try them, you really don't know. These are quieter than I expected and my first linear switch in a long time. No complaints about them at all and I think they feel great. They have a little bit of a mush to them after actuation but it's a welcoming feeling. I'm actually thinking of replacing my glorious pandas in another keyboard I have with these as I like them so much.I also had no issues with switch installation or them working. It appears all the switches came working fine right out of the box and I didn't need to replace any of them after installation.

I mess around with a lot of linear switches and these are very good. I would highly recommend these if you like a smooth switch. A problem that I haven't had till now was switches arriving DOA. I ordered a pack of 110 for my 98 key/switch keyboard and 7 of the switches do not work. I did my due diligence checking pins and the pcb but upon using another switch from the batch the key would work. I would definitely recommend the switch and I would definitely recommend ordering a bit more than you need.

These are really smooth. They're in a totally different league compared to switches like Box Reds or Speed Silvers. I personally like them better than Creams or Tangerines, especially since I wanted to use RGB in the build these went into.The stock lubing is not great as other reviewers have mentioned; some keys are scratchy but none are sticky or overlubed. They improved a little bit with use as the lube presumably spread around more evenly, but if you're in the market for these, chances are you're the type of person who will want to take the time to hand lube these yourself.The sound on these is great. I'm using them in a GMMK Pro modded with an AVX FR4 plate.55g was a little too light and prone to accidental keypresses, but sounded and felt the best. 67g was a little too heavy and tiring. I wound up going with 62g, although I wish it was just a little lighter. I might try swapping in different springs depending on what others say.Overall, super happy with these -- they're not perfect, but they're my favorite linear switch right now.

This is the best linear switch you can buy stock without having to lube or film, zero debate.Is it as good as lubing and filming gat black ink v2s, C3 Tangerines, or Alpacas? No, and that’s okay.Stock VS stock comparison everglides would still destroy all 3 of the linear kings fresh out of the bag. If you want a low hassle, high quality linear - look no further. Buy these.I recommend 62g minimum. The 67g is best imo but the 55g felt like it had such a massive travel distance for how easily the actuation occurred. I can handle light switches like silvers all day but the Everglide switches still have the same size spring / actuation distance which makes the 55g feel hollow and unsatisfying.

I have zero issues with any of these switches.These are my first linear and they feel amazing to type on.The springs are donut dipped and the stems/housings are lubed really well.There is also no film necessary because the housings are tight, which is great.These were the easiest switches I've installed in my board to date.They all went in with each and I only bent one or two pins, but was easily able to unbend them.On the topic of bent pins, mine only came with two switches that had bent pins, so they are shipped really well!Fantastic switches for the money (the Amazon listing is the cheapest you'll find them) and I might even buy more because I like them so much!