Best Compute M.2 PCIe SSD to PCIe 3.0 x4 and M.2 SATA SSD to SATA III Adapter Card

Note: this can do NVMe natively, but requires a SATA port for M.2.This works great, and at a reasonable price for what it is (basically, a connector on a circuit board). Several nice touches were included in the box, including a different bracket to adapt between half and full height PCIe slots and even a small screwdriver to get the mounting right.

Worked as expected. No deivers needed, and I was able to boot my PC from this card's NVME slott. Please note that there is NO SATA controller on this board. If you want to used SATA drives with this card, you will need to connect this card's SATA connectors to your pre-existing SATA ports on your motherboard, or other SATA controller. You will also need SATA cables, so be sure to get the best length to avoid having too much - wjich can make things look messy, or too short a cable length to snake around other cards or obstacles betweem this card and your existing SATA ports.

This raise ( adapter ) card is perfect, I ordered it since my motherboard does not have M.2 Gen3 x4 slot. After using this card, my Samsung SM951 256gb is running as it should be at full potential since my board had only M.2 Gen2 x2 build in slot.The packaging is very good and it contained the card with small screw driver, low profile bracket that you can swap to use it in a small media center or compact case, sata cable and even extra nuts in case to lose one of the two that already installed on the card.The card has two M.2 expansions, one is pci express x4 and the other is sata. I am using them both since I have an old M.2 sata HDD from a broken laptop. and it works perfectly.I highly recommend this if you r looking for a M.2 adapter card which is an excellent quality at a very reasonable price.

This was purchased in January 2017, and is still performing flawlessly. Add-in cards are sometime hit and miss; no worries with this one. Quick and easy install, this is now in my recent upgraded build, and continues to function as desired (i.e., it has worked well on two different machines). Having one each of Sata and PCIE gives you options for either type of drive.Highly recommended.

My motherboard had a PCIe slot that I was currently using, so I thought I was good to go when buying one of the new latest and greatest NVM drives (highly recommended btw). Unfortunately my m.2 slot on my motherboard was a first generation and not compatible. I was not excited about having to resort to a PCIe Adapter card. I didn't think it would work and/or I'd have problems booting or have other issues. Happily none of these were the case. Installation was a snap and there have zero issues to report. (Using this for over a year now)

I am not sure what more to add except that it works. I have only tested it with one device at a time, though I was able to recover the data off the device and that is all I needed it for.

Simply works. I use it with an M.2 Samsung PRO 950 512gb. Install was easy and simple. Comes with screw driver, sata cable (not needed for the Samsung PRO 950), screws, 2 back plates. All around good purchase. I like the option of being able to use the Key B sata M.2 in addition to the one I currently use, the Key M. I'm glad I chose this over the Lycom version which is more expensive and has less options. Windows 10 installed fine directly onto the M.2 drive from a UEFI boot flash drive.

Works as advertised, good price. Also supports additional SSD NGFF disk (which I have not tested).I am using this with my Samsung SM951 128GB NVME M.2 SSD. I plan to use this with a Samsung 960 EVO (currently on back-order).