NEMA 17 External Linear Actuator Stepper Motor, creates translational motion with the simple operation of a stepper motor resulting in a cost effective and reliable motion solution, develops a force and a motion through a straight line. Popular choice for DIY maker and 3d printer Electrical Specification: * Manufacturer Part Number: MY-17LS16-1504E-310J* Motor Type: External Linear Stepper * Step Angle: 1.8 deg. * Holding Torque: 59.49 oz-in(42 Ncm)* Rated Current/phase: 1.5A * Phase Resistance: 1.6ohms * Inductance: 3.2mH+/-20%(1KHz) Physical Specification: * Frame Size: 1.65 x 1.65 inches(42 x 42 mm) * Body Length: 1.57 inches(40 mm) * Lead Screw Length: 12.21"(310 mm)* Lead Screw Diameter: Φ0.31"( Φ8 mm)* Lead /Step: 0.00039"(0.01 mm)* Lead/Revolution: 0.079"(2 mm) * Number of Leads: 4 * Lead Length: 39.37 inches(1000 mm)* Weight: 13.76oz(390 g) Connection: Red(A+), Blue(A-), Black(B+), Green(B-) Packing List: 1 x NEMA 17 stepper motor with 310mm lead screw 1 x 39.37" motor wire 1 x Brass nut
J**B
As expected
Quality seems on-par with the StepperOnline motors I've purchased. Lead screw is straight enough in both of the motors I got. I don't have an accurate way to measure it but I'd estimate maybe 0.25mm of runout at the tip of the screw.One thing to note is that the nuts are TAPPED for M3 screws, they're not M3 through-holes. This won't work with the majority of 3D printer designs if that's what your intending them for. The description doesn't specify this, but the photo does clearly show threads in those holes and apparently I was just too lazy to pay attention. Do yourself a favor a buy a set of Delrin nuts anyway, for this or any other lead screw stepper. They'll be quieter, never need lubricating, and the lead screw will never wear out.
D**M
Easy Replacement for Makergear M2 Z-Axis, Big improvement
Didn't want to pay retail for a Makergear replacement (original silver z-axis) so I started searching on Amazon. I got this one because of the advertised torque. So far its working excellent with the original M2 brass nut although I did have to increase current in Marlin firmware. The stock M2 wiring harness does not connect the same pins as the cable included with the motor. You can use the included cable but may need to modify your pre-existing wiring harness. Interestingly the Z-axis no longer drops when power is cut. It's quieter and stronger. Overall extremely satisfied.
R**E
Good motor/screw
Screw is strait and true, nut is well machined. Good product
J**A
works perfect
works perfect, completely straight
T**T
Good stepper motor
As described
Trustpilot
5 days ago
1 month ago
