TAVR Universal Table Top TV Stand Mount, TV Legs for Most 20-75 Inch TVs, Replacement TV Feet with Great Load-Bearing Holds up to 110 lbs, TV Stands Base with Cable Management, Max VESA 800x600 mm

This product worked well enough for my new 32 inch tv situation but would be better described as "center based TV feet" and should completely avoid using the word "stand". These are just feet on rails that screw into the mounting holes in the back of your TV. Also it is important to know that the feet 13-3/4 inches long and about 8-1/4 inches at the widest point. So MINIMALLY, you need a table/stand/furniture top that is 14 inches (front-to-back) x 9 inches wide (left-to-right), or if the surface is round you will need a 14 inch round top table/stand. I would suggest FYI, my old little rolling tv furniture stand is 14-1/2 inches x 23-1/2 inches and is holding the tv + these feet well with as small of an furniture footprint as possible for holding up a 32 inch TV. To summarize the above dimension mumbo jumbo, the feet quite long in length for a 32 inch TV. This is ok in general, because the product is made and claims to support up to a 55 inch TV (personally I would attempt these feet for such a big tv but haven't tried so have no real world input on how they work with anything larger than 32 inch). Assembly of the legs was pretty easy and they provide the tools needed. Leg assembly took like 5-10 minutes of easy slow paced work. The directions were easy enough to follow... for people who are able to follow directions. If you don't do well with directions then a youtube video will show you how easy it is. Fastening to the TV was also easy for my 32 inch TV with a flat back. In short, screw went through washer then through rail and into the TV screw hole. Tighten it down, done! Again the directions cover a number of different types of TV's and their backsides (flat, curved, etc.). If you can follow directions you simply follow the directions that match your TV's backside shape and if needed any extra fastening components they provide (plastic rings, plastic spacer things, etc.). If you have trouble with directions... best I can say is you will spend more time trying to find a video for this product that matches your TV backing than just looking at the directions and figuring it out. You can probably get by just looking at the pictures that match your situation without having to read too many words lol. Also I did not use the screws provided in the box with this product. My TV had screws in the back that I just reused. Why? Well the screws in the TV are guaranteed to fit without being so long that they stab through into the screen or electronics. Simple as that. It's a 32 inch TV so even if only half the screw made it through these leg rails and into the TV holes that would be plenty to be securely fastened. I DID followed the directions for everything else and used the silver rectangular "washer" type piece that was provided. This piece acts as a fancy rectangular washer that ensures the head of the screw will not go through the hole in the leg rail. So when used, everything is tight and secure the screw is screwed all the way into the back of the TV. Pretty standard behavior of screws and washers and fastening things together, but it's just an odd rectangular washer with 3 different size holes so it will work for all kinds of TV screw sizes. So why did I even need these TV legs to begin with? I bought a 32 inch Insignia F20 Smart Fire TV to replace an old 32 inch TV that went out. The feet on my new 32 inch TV were on the left and right corners of the TV which were a hair too wide to reliably sit on my old 14-1/2 inch x 23-1/2 inch piece of furniture (an old rolling tv stand). The TV that died had a base/legs that were in the center of the TV so this was never a problem. The new TV, nope the feet were just a little too wide. These TAVR feet on rails did the trick for my 32 inch TV. Nothing fancy. Sturdy enough for a 32 inch TV. They are getting the job done but are not something I would call heavy duty or hardcore. So for a much bigger or more important TV I would go a different route. For a 32 inch tv or something that just needs to get the job done, then for less than the $20 I spent, I would use these every time :)

Really like these feet. They are not super heavy like some other stands. They are low profile and easy to attach. I like that you can mount the tv very low on them so that the tv is only a few inches off the ground, which isnt an option with some other tv mounts. Pretty easy to put together and get on the tv. Feels stable. I put a 75" tv on it. I like that the feet are also fairly short so they fit on the surface I needed them on which wasn't that deep at 13". Some of the other stands are 14 and 15 inches long. Really happy with the product, especially ar the price.

This TV stand mount works well and was easy to set up. It’s solid and sturdy for most TVs in the 20–75″ range, and the universal design made it simple to fit my screen without any hassle. My only qualm is that the build feels a bit lightweight compared to some heavier, more premium stands. It still holds the TV securely, but it doesn’t feel quite as robust as I expected. Overall, a great value for the price and gets the job done nicely.

I rate this Universal TV stand 5 star! Good quality Easy to assemble All the hardware needed for assembly provided Works very good for my 43 inch Vizio TV set P.S. This just my opinion - for larger and heavier TV sets i wold recommend to consider wall mount TV stand

This TAVR table top TV stand was extremely easy to put together. I mounted a 32-inch TV on it for my desk gaming setup, and it feels very stable. The build quality is excellent — solid metal, well-designed, and nothing cheap or flimsy. It holds the TV securely and the cable management keeps everything neat. Highly recommend if you need reliable replacement TV legs.

These are the most basic of mounting stands: two brackets with feet attached. So their stability is dependent on how wide your VESA mount is. I would only recommend these for mounts that are 300mm or more for up to 42-inch and 400mm or wider for 50-inch TVs. Front to back, the TV is stable, but the legs twist so it can still be wobbly. It says it can handle TVs up to 80 lbs, but I would not trust it to that much weight. The TV I bought them for is a 50-inch TFT-LCD weighing 50 lbs. Front-to-back it is stable, but the narrow 200mm VESA mount it has places the feet too close together to be stable side-to-side. It stands, but that's it. Would not trust it around kids. In short, if your VESA mount is 300mm or more, give them a shot. Less than that, look elsewhere.

This TV stand does its purpose. I just needed something for my basement for now since we aren’t sure what we want to do with the space and didn’t want to mount it on the wall. The instructions made it fairly easy to assemble and the quality is good. The stand itself isn’t heavy and feels very stable with the TV mounted to it. There is only one height for this, which fine with me, like I said I just needed something to get me by. This is good for the price, especially if you are looking for something temporary.

Me gustó y fácil de instalar. Lo coloque para un pantalla de 32" se ve de buena calidad y muy resistente

Bought this awhile ago. Not sure how well it might hold up. Seemed slightly overwhelmed by the monitor we had.. - Fast forward, 12+ months later. Still holding up well. Easy to assemble.

عمليه

It’s an average product for a 32 inches LED

Su ajustaba y funcionales perfectamente