Altima Fog Light 2010 2011-2012 - RP Remarkable Power, Fog Light for 2010-2012 Altima 4DR Sedan Driving Bumper Fog Lamps with Black Cover Wiring Harness& Switch Clear Lens Kit FL7062

fit perfect on a 2012 altima ..only thing is if you didnt have fog lights to begin with check on the inside of your bumper for the metal tabs that the bolts go thru mine didnt have them so i bought two bolts and nuts and washers for the top of the casing the light goes in then i put some heavy zip ties criss cross on the bottem once you see it you will understand ive had them on about 2 months they dont wiggle at all that i can see...the hard part is running the wire thru the firewall there is no room at all and i mean at all unless you drill a new hole which i didnt i just wired mine into the 15 amp fuse that runs the lights with a add a fuse wire ..the lights come on with the headlights and they stay on hi or low beam which i like.personal preference i guess. i used the ground on the battery ..nissan uses micro fuses very small u can get em at any auto parts store i had some on hand just in case......good luck...its a diy np

Don’t be scared about the wiring, it’s pretty simple. The wire with a fuse you can cut it and crimp it to a fusible link I used one the fuses from the fuse box for the headlights so my fogs turn on only if the car is on. The red wire I cut the end off and crimped on a circle connector to put on the positive side of the battery. The two black wires with circle connector one can go to ground on the chassis and the other to neg side of battery or ground. Pretty simple once you get to it

Durable excelente uso brillas mucho y excelentes para mi auto

The media could not be loaded.  Mala calidad al primer día de uso se desarmó dela nada

Used for my 2011 Nissan Altima and they work great. The wire just keeps coming loose on one of them.

Only 1 problem this is not for a 2010 Nissan Altima. The car is already prewired. You only need to get a multifunction switch which was not sent they sent the button and wires. So I did have to go and find that part. Other then that everything was easy install

This fits my 2012 nissian altima 2.5S perfectly. The wiring was a little tricky for me to figure out but it works well. I installed the switch next to my traction control button jus pop the place holder and then rap the switch in some electrical tape so the switch fits snug.

My son broke his light out including the support bracket. This product comes with everything you need including the support brackets and wiring and will do both sides. Well priced!