Buyers Products CC400 PVC Conduit Carrier Kit, 4 Inch Diameter, Mounting Hardware Included, Spring-Loaded Latch, Weather-Resistant Door Gasket

Honestly while it does the job just but the actual top tube. Price difference isnt enough to make you want this

Total waste of money.

have received the kit ... but no tube ...

Product is good and delivered fast. It's not 4" as mentioned. It is mentioned on the box 4" and a half. But it is 4.8" for real. Also when you lock the cover, it doesn't seal properly. Water and dust come inside. It needs some adjustment and thicker rubber.

I looked for the best available Conduit Carrier and I felt these were the best. These are the only ones I found with a true "saddle" for the conduit to sit in. Much stronger and far less chance of crushing the PVC pipe. I did interact with the customer service department to get some additional parts and they were fast and efficient. The end castings seem to be quite good. No cavities or flaws in any of them. I really wanted to give this a 5 star but there are two flaws that stopped me. First, and this is a small one, the end casings are shipped face to face (aluminum to aluminum) and they tend to arrive somewhat scratched. Not a biggie since these are construction grade items and pretty isn't critical so minor issue. The more troubling problem is the way the hinge and latch are designed, the covers are quite loose when latched and not even close to watertight. There is a nice rubber gasket on the inside of the opening lid but because of the design, it never touches the mating surface. The larger the PVC size the bigger the gap. You can see this in my pics. (I have purchased one of each size - 4", 6" and 8") I solved the problem by adding some spring latches which hold the doors closed tight so they are now watertight. With that modification these are the best (IMHO).

Does not fit a 4” conduit, the U-bolts are too small to mount to anything. You’re better off just buying the pvc fittings and metal 2 hole straps. Waste of money

Almost useless.To you both that come with this are useless I've wasted 3 hours of my life trying to make something work. I had to run out and buy unistrat and attach it to my ladder racks because of you bolts are not long enough to do the job there supposed to do. Then after installing unit stripe on top of my ladder ax I had to cut down the u-bolts by a quarter inch to make everything work and now the threads will not accept a nut. I've been working with threaded rod and unistrut and building things my entire adult life I've never not been able to get a thread to work after cutting a piece of all thread. Then when I went to go put the caps on the end of the pipe after putting a little silicone inside them didn't know where near tight enough to stay on. I had to grab some loctite out of my garage and now I'm literally 3 hours into this project and I'm nowhere near being finished I have to go out and buy more stock in order to complete this project. I'm about to cut up this piece of PVc pipe with the caps and send everything back and get my money back that's how irritated I am with this product.

I used the cheaper pipe and have to double it up with a lip from the bell end. Buy the proper/more-expensive pipe for a better fit. Also used construction glue to keep it water-tight. Pros: Mounting hardware is included and works well. Design keeps water out. Cons: although its constructed of a aluminum-like casting, it's showing light signs of brown rusting like a steel casting would.