MI-203 Ultra Low Profile Fixed TV Wall Mount for 13–32 Inch Flat Screen TVs | 0.55” Flush Design | VESA 75x75 & 100x100 | 60 lb Capacity | Built-in Bubble Level

Easy to install! A pretty great wall mount for a small space. Works great on my 24 inch TV that I have in my kitchen. absolutely love!

Works great in tight spaces. A little hard to tighten the screws once the tv is on the mount but a little ingenuity and it can be easily accomplished.

The Mount‑It Low Profile TV Wall Mount is a great value overall. It was very easy to install, and attaching the TV to the bracket once on the wall was just as simple. Once mounted, it sits extremely close to the wall, which is exactly what I wanted for a clean, minimal look in a small guest room. The only drawback—and the reason I didn’t give it five stars—is that my TV uses M6 VESA bolts, and the mount didn’t include them. Even worse, the holes on the bracket weren’t large enough for M6 bolts to pass through. I had to drill out the holes myself. Thankfully, the steel is soft and drills easily, so it wasn’t a big problem, but I can see this being why some people return it. If the mount came ready for M6 hardware, it would be an easy five‑star product. Still, for the price, it’s a solid buy with a simple workaround.

I used it to mount a 20” monitor near my networking equipment in the basement. Easy to install and feels very secure. I wouldn’t use this for a larger TV in a family room, but for the price and my application, it’s perfect. One nice feature: the screws that lock the monitor or TV to the wall portion of the mount can be used for minor leveling if needed.

Great, extremely easy to set up.

• I used this on a 27" Acer CB272. The setup was straightforward until I started getting the brackets on the wall. • Use your own wall anchor if you can. The anchors are cheap and the top anchor just spun with the screw. I had to hold it with a pair of needle nose pliers while I got the screw most of the way in. After I got it seated, the anchor was slide out of the wall by about a quarter inch. That meant the monitor was aiming down towards the desk. • To fix this I had to use some small washers and sheetrock screws to hold the wall bracket tight to the wall. • Then the issue with the design...even with the mount tight to the wall, when you put the monitor on it, it sags down towards the desk. The only way to stop that is to put in the two screws that hold the monitor mount to the wall mount. Unfortunately, at least with my monitor, that is nearly impossible to reach. A screwdriver handle pushes the angle too far to drop the screw into place with a driver. I tried lowering the monitor into place with the screws already in, and no go. I finally had to use a piece of tape to lower a longer screw into place, and tighten it enough to hold the monitor in place. What should have taken about ten minutes took almost two hours. The end result was what I wanted, but for all the options out there, you might keep looking to find one that doesn't have these issues.

This works well and is easy install. All needed installation hardware is included. This is really designed for Tv's or monitors that have the wires coming out of the bottom. It's very close to the wall so wiring coming straight out of the back might not work.

I hardly ever leave product reviews but having spent *hours* trying to set this up, feel the need to. Most of the install process is straightforward. Mounting to the wall was no problem—it’s the last step (after you’ve already drilled holes into your wall) that’s absolutely impossible and infuriating. The way the monitor plate attached to the wall plate is with two screws that you install on the top to keep them connected—this is impossible to do with any tool I had, or any tool I could find at a hardware store (tried several extra long screwdrivers, and even a jewelry screwdriver set the manufacturer recommended, all to no avail). I tried contacting the manufacturer and they said they’d get back to me, but never did. Now I have two anchors in my wall and a monitor that still isn’t mounted. Avoid this product at all costs!

It was able to hold up my 27” monitor with no issues. Attached it to 1 stud and the rest is history

Low profile and easy install with the level

Good solid wall mount and keeps the tv very close to the wall. The plastic anchors that come with the set do not work for drywall, so you’ll need to find a different type.

Simple mount but worked well for my purpose; easy install and puts the TV close to the wall. No issues

This thing is tiny. Literally the VESA 100 square, by maybe 1/2 inch thickness. I mounted my Samsung Odyssey Neo 57 with this!! No problem. It can definitely handle a good amount of weight (says up to 60lbs and I believe it). I would buy this again for mounting or remounting my home TV panels. Would make for a nice tight wall mount.