Speedokote SMR-207/211 - Hot Rod Black Paint, Black Satin 2K Urethane, SMR-207 4:1 mix Single Stage Gallon kit with activator included. For California, Delaware, or Maryland, order SMR-456.

I had to purchase 3 times because I did not add any reducer spraying in 100 degree shop! First time painting as well! 2nd batch I spilled all over shop floor! My f up again., 3rd one turned out good with some tweaking. Note: use slow reducer or extra slow reducer if spraying over 85 degrees. I wouldn’t try satin if it’s your first time painting. Practice on hood or sections first. No buffing or it will be gloss. I sprayed gloss clear over the satin on bumpers and some trim. Good product, I’m just a newbie.

Fantastic paint! Sprays well, lays well, covers well, all with a gorgeous finish that even feels satin smooth. Holds up unbelievably against light impact and abrasions. It looks perfect on the inside as well as the full exterior, really a great product.

First of all, Wow! I am thrilled with how this paint worked for my vehicle and how easy it was to use! In applying this paint, I used an 8-gallon, 1.5 HP air compressor with a 1.4mm tip on a gravity feed HVLP cheap spray gun at 8-12 psi. I mixed the paint at the 4:1 ratio it calls for in the instructions without adding any reducer or anything like that, and it was the perfect mix for application! I did all the prep and painting in my front yard at 70-90 degrees. It does better the closer to 70 degrees you get, but when you don't have a professional auto paint booth, you have to do what you can with the conditions you get. Once all the prep work was done, it took me roughly two 6-hour days to paint my Jeep Cherokee. I applied 3 to 4 coats of paint over the whole body, excluding the bumpers. Again, I am not a professional, and this was my first time painting a vehicle with actual painting equipment and automotive paint, but if you have the patience, time, and dedication to your project vehicle. You can make that project vehicle look good as new! I will add some pictures of my Jeep when I can for reference!

Great product, price was great. Covered well with 2 coats. Layed perfect and was super easy to spray.

Product dries alittle too quick and seems to have alittle texture even when applied in a controlled temp atmosphere. Used a 1.3 HTE gun at 29lbs with trigger pulled. mixed 4 to 1 with activator. sprayed with temp at 72 degrees

It’s a ready to spray so you cans spray a thick style finish Otherwise goes on like a new car So it’s equal to a quart of unmixed paint

Bought this for my pops to use on an old, vintage truck he was restoring. It was a "ratrod" so was never going to be perfect but it turned out pretty good. He painted it himself and was pleased with the results. He said the paint provided good coverage and was fairly easy to apply. I've included the results. "Hot Rod" black as purchased.

Great customer service. Buy the paint and see if it works for you, does dry quickly.