Spurtar Feeler Gauges Stainless Steel 32 Blades 0.04-0.88 mm (0.0015-0.035 Inch) Feeler Gauge Metric/Imperial for Measuring Gap Width Thickness for Guitar, Spark Plug, Valve, Piston Measure

Initial impressions are good once you get over the fact you need to spend 20mins cleaning all the excess oil off with tissues then washing and rinsing in hot soapy water to remove all trace of the oil, I had to do this as they are for guitar setup so no oil (well not that kind) anywhere near fretboard.... Also bin all the packaging except the carboard box (I keep them in it), as the rest of packaging is contaminated with the oil.

Great item high-quality ! I can truly recommend that 👌

They seem to be well made but were drenched in oil, which is fine if you are going to use them for mechanics, not so good if it is for use with a guitar. They are stainless steel, so I don't see why they should be so oily.

When you open the outer cardboard box the feeler gauge is contained within a zip lock plastic bag, then a clear and blue sleeve with fold over cover for your tool box, and finally the feeler gauge itself wrapped in oil soaked tissue paper. Unlike some low cost feeler gauges, these blades are clearly etched (not printed) for long term use, with each feeler gauge showing the value in both millimetres and imperial thousands of an inch for those that prefer old school. The 32 feeler blades cover a large range of thicknesses, so should cater for most peoples needs. Would happily purchase this product again if I lost this.

Great for DIY.Seems to be accurate. Good value.

Excellent item

Comes boxed, bag and oiled, very nice quality.

The product is as expected aside from the fact that it comes SMOTHERED in oil. The description says that the oil is "anti-rust" oil and is there to prevent rust and to also slide out the blades with ease. I can kind of get the sliding blades but this thing is made of stainless steel so why would it need anti-rust oil? The main issue is that it is DRENCHED in oil. I had to go through and rub off each blade with a tisue and the tissue came back absolutely black. I can't get the oil off my hands and it is pretty gross. I bought this to measure the frets on my banjo and I'm nervous to slide the thing on my fret board lest my instrument gets drenched in this grossness. Overall fine for the job and if you're using it in a garage for mechanical projects it is perfect but for instruments I would try and find one with less lube...

Galgas de buena calidad y medidas muy usuales.

Excellent.

Ottimo e resistente alla ruggine

Ich bin absolut zufrieden mit der Spurtar 32-Klingen-Fühlerlehre. Die Verarbeitung ist sehr hochwertig – alle Blätter bestehen aus rostfreiem Edelstahl und lassen sich leicht ausklappen und wieder sicher verstauen. Besonders praktisch finde ich, dass sowohl metrische als auch imperiale Maße angegeben sind. Die Skalen sind sauber eingraviert und gut lesbar. Ich nutze das Tool hauptsächlich im Bereich Kfz und bei technischen Feineinstellungen – es liefert durchweg präzise Messergebnisse. Durch die große Bandbreite von 0,04 mm bis 0,88 mm ist für nahezu jeden Anwendungsfall die passende Stärke dabei. Fazit: Super Preis-Leistungs-Verhältnis, zuverlässig, robust und ein Muss für jede Werkstatt oder den ambitionierten Heimwerker. Klare Kaufempfehlung!

Great set of gauges in both Imperial and Metric sizes. I actually bought it to use to measure relief on guitar necks and it works wonderfully at a fraction of the cost of those specifically designed for musical instruments. My only issue would be with the fact that they are fairly oily (for their protection when used outside) but they are easy to wipe off.