Anti Vibration Pads for Washing Machine with Tank Tread Grip | 4 Pack + Level | Fits Most Round Feet up to 1.75” | Stops Washer Dryer from Moving | Rubber Antivibration Stabilizer for Leveling Washer

These pads helped with my washer and dryers vibration thanks to these pads we no longer hear banging on the floor. the item was exactly as described and will save our floor and appliances. I would recommend this product to anyone that has a washer and dryer that's not level .

If you have your washer in a drain pan with tapered sides, these might not sit flat depending on the foot placement of your particular machines. We recently purchased a set of these to go with our new Super Capacity LG Washer with the matching dryer. Our old set was the standard 27" wide. The new set is 29" wide. Plastic drain pans measuring 30x33" on the outside have tapered edges resulting with the interior dimensions of 29x32. Because the feet on the LG washer are VERY near the outer edges, these won't lay completely flat in the pan with the washer in the slots. They kind of sit up on the edge on each corner. They are pretty firm, but we were able to finally get them all properly aligned under each foot with all pads slightly sitting on the edge of the pan. I was concerned the lack of solid footing might cause a problem, but I was pleasantly surprised. Even when spinning a king size comforter and its associated bedding, the washing machine barely moved. It is the quietest king size wash that's ever occurred in our laundry room over the decades. I plan or changing the plastic pan for a genuine 30x33" stainless steel pan to correct the issue. I wouldn't bother if the plastic pan drain hadn't been so poorly executed. I would definitely recommend these. Others complained about the off-gassing. They do have a scent, but it's pretty slight. I'm sensitive to lots of smells and I had to hold these up to my nose to really smell them. My hands didn't smell bad after LOTS of manipulation trying to get one securely under washer foot. Well worth the money and the included level was invaluable. Best part is that it's magnetic and very easy to secure to the washer to measure side-to-side, front-to-back, and corner-to-corner. Good stuff!

I have a washing machine and it rocks and shakes and moves across the floor. But it is 20 years old and works really well so I do not want to get rid of it. With these pads: The vibration on the floor is cut down by half, it does rock pretty hard back and forth still, but it stopped moving around the floor. I think for me it is worth the money as it allows me to continue to use the machine.

works good for vibration and movement prevention

These anti-vibration pads do exactly what they claim. They significantly reduce movement and vibration from the washing machine, and I haven’t had any noise complaints from neighbors since using them. Installation was quick and easy no tools required. Overall, they’re a simple and effective solution that works as expected.

Bought these to do two things: to stabilize my washer (cut down movement, vibration and noise) and to protect my newly installed laundry room floors. I will say they have cut down some on movement (my older top-loading washer does not travel as far with these feet). My washer used to push my dryer into the wall it traveled so much, but it did that rather quietly. That is NOT the case now. I swear the noise level seems to be much HIGHER than before (it’s like all the vibration and movement just echoes in place). We cannot watch tv two rooms away without turning up the volume at least 5-8 notches when the washer is going, so I just don’t wash clothes if we are trying to relax with tv. The one goal that seems to be working - though I’m not sure how - is that it does not seem to be tearing holes in the floor. I’m keeping an eye on that and will remove the feet if necessary, but the feet were a real pain to put on (especially on the back legs) because they don’t slide into place (not supposed to). Hence you need 2 people to install - one strong enough to hold washer up and one with long enough arms to reach back to place feet in just the right spots so the washer can be lowered down perfectly on the feet. It’s a trial and error (more than one try unless you get really lucky) process. Would I buy them again? No, but do I want to crawl back undr the washer to remove them? No. They work fine under the dryer, but it did not travel nor was it noisy to begin with. I just wanted both appliances the same height and the floors protected, so we put the feet under both.

These are excellent, I did not buy them for a washing machine, but for my 200lb+ desk which was vibrating noise down to the unit below me. The desk is prob closer to 400lbs with all the monitors and equipment on it and these feet have held up for over a year, and my neighbors below me said I solved all the noise issues stemming from gaming.

These worked wonderful

love them ! so solid they might just outlive me !

A little pricy .. But it is the only one that realy works .. All ather are plastic .. This one is Rubber and does not move.

We have a newish Electrolux washer and a dryer. They are in the basement on a rubber like floor that slopes towards a drain. We leveled them, but they both slowly walked. So I got two sets of these pads, installed them, and level the units again, and I put tape on the floor to see if they still walked. So far the units have not moved at all. YESSS! Also, I have not noticed any vibration sounds form the units, that seems to be quieter too. So yes, these things seem to work quite well. I would get them again and recommend them.

They made my machine move around more and wobbled, way overpriced, just use a rubber mat instead

My washing machine went wild on these, hockey pucks worked better. Too be fair I still replaced the washer because of excessive vibration but the replacement machine works very well on pucks. I think it very much depends on the rigidity of your floor what will work best. Returned these for a refund.